The number of published studies evaluating the effects of microplastics (MPs) in fish has increased in the last decade. However, of the available studies, few have explored the long-term effects of MPs on fish growth and reproduction and have resorted to MPs in the form of μm-sized beads/microspheres. In this study, 6-10 day-old post-hatch medaka (Oryzias latipes) fish were exposed to 50 (i.e. 1X) and 500 (i.e. 10X) μg of heterogeneously sized and irregularly shaped virgin polystyrene (PS) MP particles (200-μm range)/L for 150 days. These concentrations corresponded to respective daily mean values of 247 and 3087 particles/L administered through the diet. The PS MPs dietary exposure resulted in body burdens of 114 and 440 particles/g fish on day 50, and of 78 and 173 particles/g fish on day 100 since the respective exposures to the 1X and the 10X treatments started. The biometric analyses found no incidence of PS MPs ingestion on overall fish growth and development. The histological survey in the 10X group did not reveal alterations in gills or in the digestive tract. Mild alterations in other organs were seen and included increased fluid material in the peritoneal cavity, glomerular and tubular alterations in kidneys, and differences in the diameter of the thyroid follicles and thickness of the follicular epithelial cells. The initial days of the reproductive phase revealed MP-related differences in the number of gravid females, fecundity, and fertilization rates. Overall, these values reverted to normal rates throughout the succeeding days. No significant effects of PS MPs exposure were evidenced on offspring success. The 150-day PS MPs dietary exposure used in this study provided clues of histological effects and a reproduction delay. However, it did not seem to compromise overall growth/thriving and the ongoing reproduction.

The escalating global anthropogenic activities associated with industrial development have led to the increased introduction of heavy metals (HMs) into marine environments through effluents. This study aimed to assess the toxicity of three HMs (Cr, Cu, and Cd) on organisms spanning different trophic levels: Phaeodactylum tricornutum (a primary producer), Artemia salina (a primary consumer), and Aurelia aurita (a secondary consumer). The EC₅₀ values obtained revealed varying relative toxicities for the tested organisms. Phaeodactylum tricornutum exhibited the highest sensitivity to Cu, followed by Cd and Cr, while Artemia salina displayed the highest sensitivity to Cr, followed by Cu and Cd. A. aurita, on the other hand, demonstrated the highest sensitivity to Cu, followed by Cr and Cd. This experimental investigation further supported previous studies that have suggested A. aurita as a suitable model organism for ecotoxicity testing. Our experiments encompassed sublethal endpoints, such as pulsation frequency, acute effects, and mortality, highlighting different levels of sensitivity among the organisms.

Minimum Quantity Lubrication (MQL) has received much attention from the research community as a potential lubricating system to reduce environmental hazards and health issues that can be commonly found in flood cooling/lubricating systems based on metalworking fluids. The addition of nanoparticles in MQL systems (NMQL) has led to improved machining performance, increasing the cooling capability and reducing friction and tool wear, and some researchers have proved the applicability of this type of system for difficult-to-cut materials. However, the mist generated by MQL systems due to both the MQL system itself and the machining operation may pose an additional hazard to operators which is being overlooked by the research community. These hazards become more severe when using nanoparticles, but unfortunately very few works have paid attention to nanoparticle toxicity as applied in MQL systems, and this issue should be clearly understood before encouraging its implementation in industry. Furthermore, current legislation does not help since regulation of permissible exposure limits when dealing with nanoparticles is still ongoing in most cases. In this work, the toxicity of nanoparticles applied in MQL systems is analyzed, and recent research on studies of nanoparticle toxicity both in vitro and in vivo is presented. A relative comparison of toxicity is provided for those nanoparticles that have been reported in the literature as potential additives for MQL. The review is focused on analyzing the main factors of toxicity of nanoparticles which are identified as size, shape, surface properties, agglomeration and solubility. This review presents guidelines for safer nanolubricant formulations, guiding practitioners towards proper NMQL implementations in industry. Furthermore, current occupational exposure limits and recommendations are provided for all the nanoparticles potentially used in MQL systems, which is of interest in terms of work safety.

Data on the potential impact on human health of engineered nanomaterials are still scarce, with an evident lack of knowledge on the exposure levels at all stages of the life cycle. By prioritizing the responsible handling of engineered nanomaterials (ENMs), companies can promote sustainability by minimizing the risks of occupational exposure, protecting employee well-being, reducing liability, and avoiding costly environmental remediation efforts. This research aims to evaluate the risk in real scenarios involving the use of carbon-based nanomaterials in research laboratories, pilot-scale facilities, and industrial settings. Several online and offline instruments have been employed to characterize the particulate matter present in these environments, including particles in the nanometer range and relevant fractions for risk assessment purposes. Samples collected on polycarbonate filters were analyzed by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Exposure estimation has been performed by applying a decision based on tier 2 from the nanoGEM methodology, with the weighing and transferring of reduced graphene oxide (RGO) in a pilot plant being the most liberating processes, which are the activities with the highest risk of exposure. In addition, high levels of particle concentration, with peaks up to 1.7 × 10⁵ and 4.7 × 10⁵ part/cm³, have been found for the dispersion of carbon nanotubes (CNTs) and incorporation of carbonaceous nanoparticles into resins, respectively.

This study aims to use geochemical, mineralogical, ecotoxicological and biological indicators for a comprehensive assessment of the ecological risks related to the mobility, ecotoxicity and bioavailability of potentially harmful elements in the Lousal mining district. Particularly, toxicity was evaluated using four assays: algae, cytotoxicity assays with HaCaT cell line (dermal), earthworms and Daphnia magna. The geochemical and mineralogical characterization of the studied area shows that the mine wastes underwent intense weathering processes, producing important contamination of the adjacent soils, which also led to the release and mobilization of PHEs into nearby water courses. Total PTE results indicate that the soils affected by mining activities were highly contaminated with As and Cu, while Zn and Pb content ranged from low to very high, depending on the analyzed samples. Cadmium levels were found to be very low in most of the soil samples. The test using Daphnia magna was the most sensitive bioassay, while the Eisenia foetida test was the least sensitive. Except for the LOS07 soil sample, the rest of the soils were classified as “High acute toxicity” and “Very high acute toxicity” for aquatic systems. The results in HACaT cells showed results similar to the ecotoxicological bioassays. The application of biotests, together with geochemical and mineralogical characterization, is a very useful tool to establish the degree of contamination and the environmental risk of potentially harmful elements.