Mayakrishnan Prabakaran

Dr. Mayakrishnan Prabakaran

Konkuk University, Seoul, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 April 2018 in Journal of Adhesion Science and Technology
Verified
Journal Article
Closed access
Mayakrishnan PrabakaranMayakrishnan Prabakaran
Mayakrishnan Prabakaran
SKSeung-Hyun Kim
Seung-Hyun Kim
ASAsokan Sasireka
Asokan Sasireka
KKKathirvel Kalaiselvi
Kathirvel Kalaiselvi
ICIll-Min Chung
Ill-Min Chung
The corrosion of aluminum specimens in Polygonatum odaratum (P. odaratum) extract was studied using weight loss measurements, potentiodynamic polarization, electrochemical impedance spectroscopy, scanning electron microscopy (SEM), and electron dispersive X-ray spectroscopy (EDX) techniques. The inhibition efficiency of the aluminum specimens in the presence of inhibitor from P. odaratum plant extract at 303–333 ± 1 K was evaluated with the weight loss technique. The results indicate the inhibition efficiency of P. odaratum plant extract increased with increased concentration of the inhibitor and decreased temperature in an acidic medium. The corrosion inhibition properties of the P. odaratum plant extract for aluminum specimen corrosion in 1 M HCl were analyzed using polarization studies and electrochemical impedance studies, which clearly showed a mixed-type inhibitor. UV-visible spectroscopy, Fourier transform infrared (FT-IR), SEM, and EDX revealed the surface morphology in the presence and absence of inhibitor on the metal surface. The results indicated the feasibility of using the P. odaratum plant extract as a corrosion inhibitor in acid environments.

21 October 2018 in Molecules
Verified
Journal Article
Open access
PDF file
Mayakrishnan PrabakaranMayakrishnan Prabakaran
Mayakrishnan Prabakaran
KLKyoung-Jin Lee
Kyoung-Jin Lee
YAYeonju An
Yeonju An
CKChang Kwon
Chang Kwon
SKSoyeon Kim
Soyeon Kim
ICIll-Min Chung
Ill-Min Chung
Soybeans are low in saturated fat and a rich source of protein, dietary fiber, and isoflavone; however, their nutritional shelf life is yet to be established. This study evaluated the change in the stability and quality of fatty acids in raw and roasted soybean flour under different storage temperatures and durations. In both types of soybean flour, the fatty-acid content was the highest in the order of linoleic acid (18-carbon chain with two double bonds; C18:2), oleic acid (C18:1), palmitic acid (C16:0), linolenic acid (18:3), and stearic acid (C18:0), which represented 47%, 26%, 12%, 9%, and 4% of the total fatty-acid content, respectively. The major unsaturated fatty acids of raw soybean flour—oleic acid, linoleic acid, and linolenic acid—decreased by 30.0%, 94.4%, and 97.7%, and 38.0%, 94.8%, and 98.0% when stored in polyethylene and polypropylene film, respectively, after 48 weeks of storage under high-temperature conditions. These values were later increased due to hydrolysis. This study presents the changes in composition and content of two soybean flour types and the changes in quality and stability of fatty acids in response to storage temperature and duration. This study shows the influence of storage conditions and temperature on the nutritional quality which is least affected by packing material.

18 March 2020 in Journal of Coordination Chemistry
Verified
Journal Article
Closed access
VRVenkittapuram Palaniswamy Radha
Venkittapuram Palaniswamy Radha
SCSubramanian Chitra
Subramanian Chitra
SJSuyambulingam Jonekirubavathi
Suyambulingam Jonekirubavathi
ICIll-Min Chung
Ill-Min Chung
SKSeung-Hyun Kim
Seung-Hyun Kim
Mayakrishnan PrabakaranMayakrishnan Prabakaran
Mayakrishnan Prabakaran
A series of binuclear Co(II), Ni(II), Cu(II), and Zn(II) complexes were prepared with a novel bidentate Schiff base ligand derived by condensation of 3,3′-diaminobenzidine with creatinine. The prepared compounds were characterized by elemental analysis, magnetic susceptibility measurements, molar conductivity, FT-IR, UV-vis, 1H NMR, 13C NMR and mass spectra and thermal analysis (TGA/DTG). From spectral analysis, an octahedral geometry was proposed for the complexes except Zn(II) complex which had tetrahedral geometry. The microcrystalline nature of the complexes has been confirmed by powder XRD and SEM analyses. The molecular structures of the Schiff base L and its Zn(II) complex were fully optimized and also their quantum chemical parameters were calculated. The synthesized ligand and their metal complexes were screened against two gram-positive, gram-negative bacterial and fungal species. The results revealed that the metal complexes exhibited higher antimicrobial activity than the free ligand. The antioxidant activity of the synthesized ligand and their metal complexes was carried out by DPPH method.

19 August 2022 in Buildings
Verified
Journal Article
Open access
PDF file
Ramalingam MalathyRamalingam Malathy
Ramalingam Malathy
SSSellamuthu Ramachandran Rajagopal Sentilkumar
Sellamuthu Ramachandran Rajagopal Sentilkumar
APAnnamalai Rangasamy Prakash
Annamalai Rangasamy Prakash
BDBibhuti Bhusan Das
Bibhuti Bhusan Das
ICIll-Min Chung
Ill-Min Chung
Mayakrishnan PrabakaranMayakrishnan Prabakaran
Mayakrishnan Prabakaran
Industrial silica sand is a by-product obtained from the industries like paint, paper, rubber etc. It has a similar property with river sand and& M sand. This study explores the effect of high content of silica sand as a partial replacement for fine aggregate for concrete making in construction purpose. In this present research four types of silica sand from two different industrial units (coarser silica sand (VC and TC) and finer silica sand (VF and TF)) were used. The physical classification and morphology observation of silica sand through scanning electron microscope (SEM), energy-dispersive X-ray (EDAX), X-ray fluorescence (XRF) is examined. Fresh and hardened concrete properties were performed for the six sand samples, with two grades (M20 and M30) of concrete. No new compositions or phases were identified in silica sand concrete. Both fine and coarse silica sands were finer than river sand and M sand, as evaluated from the physical classification. The workability of silica sand mix at a fresh state improves the concrete performance up to 40%. The mix, which contains 80% coarser silica sand (TC) with 20% river sand, attained the maximum compressive strength of 34.5 Mpa and tensile strength of 3.5 Mpa at 28 days, which was the greatest of all the mixes. The combination of silica sand and river sand or M sand showed the superior impact of the concrete over the discrete concrete. SEM images showed the well-developed hydrated products like calcium silicate hydrate (CSH), calcium hydroxide (CH) and ettringite in all concrete mixes. It was observed from the XRD pattern that all concrete mixes containing silica sand have a high peak of quartz (SiO2), and calcium silicate hydrate (CSH) exhibits the formation of hydration products in the concrete. Similar stretching and bending patterns of silica sand concrete relates the pattern of nominal sand concrete as observed from Fourier-transform infrared spectroscopy (FTIR).

21 July 2022 in Processes
Verified
Journal Article
Open access
PDF file
Ramalingam MalathyRamalingam Malathy
Ramalingam Malathy
RSRagav Shanmugam
Ragav Shanmugam
ICIll-Min Chung
Ill-Min Chung
SKSeung Hyun Kim
Seung Hyun Kim
Mayakrishnan PrabakaranMayakrishnan Prabakaran
Mayakrishnan Prabakaran
A mixture of hydraulic lime and pozzolanic material can be used as a binder in making concrete and mortar for energy-efficient construction purposes. Generally, lime possesses lower strength and higher setting time. By introducing pozzolans in the lime mortar, their cementitious properties could be increased and could compete with the cement mortars. The use of pozzolan-lime binder in mortar reduces the utilisation of cement, and hence reduces the environmental problem originating from cement production. This study mainly deals with the mechanical and microstructural properties of lime and lime composite mortars made up of hydraulic lime, silica fume and rice husk ash. Three composite mortars were made with the following combination such as hydraulic lime-silica fume (LSF), hydraulic lime-rice husk ash (LRA) and hydraulic lime-silica fume-rice husk ash (LSR). Further, their properties were compared with the pure lime mortar. Preliminary investigations were made on the lime reactivity and pozzolanic reactivity tests. It was understood that silica fumes have a (15%) better reactivity than rice husk ash. The introduction of pozzolans in the lime mortar promotes fresh, hardened and microstructural properties. The 28 days’ compressive strength of lime composite mortars achieved more than 16 Mpa, while the lime mortar attained 4 Mpa. The combined effect of pozzolanic reaction, hydration and carbonation in the lime composite mortars achieved four times the strength of lime mortar at 28 days. A high peak of calcium carbonate was detected in lime mortar as a result of carbonation. The well-developed microstructure of calcium silicate hydrate and calcium hydroxide exhibits the formation of hydration products in the lime composite mortars as observed from a scanning electron microscope (SEM), energy-dispersive X-ray (EDX) and X-ray diffraction (XRD). Similar graphs of Fourier transform infrared spectroscopy (FT-IR) showed the presence of equivalent functional elements in all lime composite mortars.

24 December 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Ramalingam MalathyRamalingam Malathy
Ramalingam Malathy
Mayakrishnan PrabakaranMayakrishnan Prabakaran
Mayakrishnan Prabakaran
KKKathirvel Kalaiselvi
Kathirvel Kalaiselvi
ICIll-Min Chung
Ill-Min Chung
SKSeung Hyun Kim
Seung Hyun Kim
Panax ginseng C.A. (P. ginseng) Meyer has been in use since ancient times for its therapeutic activities. Although several studies have investigated the roles of phytoconstituents in human and animal health, no comparative studies have been conducted to test the efficacy of P.ginseng leaf, fruit and root. Therefore, this study aimed to identify the antioxidant and anticorrosion activities of ginseng prepared using five different solvents. The methanolic fruit extract showed comparatively good activity in all assays. The total phenolic content (TPC) was higher in fruit (95.21 mg/g), followed by leaf (39.21 mg/g) extracted in methanol solvent compared other solvents. The total flavonoid content (TFC) of fruit methanolic extract was 50.21 mg/g, which was followed by fruit extracted in ethanol (41.33 mg/g). The same phenomenon was observed in all antioxidant studies. Through Ultrahigh Performance Liquid Chromatography (UHPLC), the presence of 23 phenolic components categorized as hydroxycinnamic acids, hydroxybenzoic acids and a few other groups that play a vital role in antioxidation was identified. Phenols such as chlorogenic acid (1002.2 μg/g), gentisic acid (854.21 μg/g) and rutin (165.32 μg/g) were found in higher amounts in fruit whereas leaf showed significant amounts of m-coumaric acid (185.32 μg/g) and p-coumaric acid (125.24 μg/g). The anti-corrosive property of the fruit extract of the ginseng with methanol as a solvent was analyzed for a copper specimen exposed to 1 M HCl medium and found to have 96% corrosion inhibition efficiency at a 1000-ppm concentration. The smooth surface of the specimen exposed to corrosive media shown in a field emission scanning electron microscope (FESEM) image confirms that the specimen was protected from corrosion, and energy-dispersive X-ray spectroscopy (EDX) spectra show that the loss of Cu is reduced in inhibited metal surface. Atomic force microscopy (AFM) images and surface roughness factor also validate the corrosion inhibition characteristic of ginseng plant extract.