Rami DOUKEH

Dr. Rami DOUKEH

The Department of Well Drilling and Extraction, Petroleum & Gas University of Ploieşti, Ploieşti, Prahova, Romania
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
AMAndrei Moldovan
Andrei Moldovan
Stanca CucStanca Cuc
Stanca Cuc
Doina ProdanDoina Prodan
Doina Prodan
MRMircea Rusu
Mircea Rusu
DPDorin Popa
Dorin Popa
Ovidiu NemesOvidiu Nemes
Ovidiu Nemes
The present study is focused on polylactic acid (PLA) blending with bio nanoadditives, such as Tonsil® (clay) and Aerosil®, to obtain nanocomposites for a new generation of food packaging. The basic composition was enhanced using Sorbitan oleate (E494) and Proviplast as plasticizers, increasing the composite samples’ stability and their mechanical strength. Four mixtures were prepared: S1 with Tonsil®; S2 with Aerosil®; S3 with Aerosil® + Proviplast; and S4 with Sabosorb. They were complexly characterized by FT-IR spectroscopy, differential scanning calorimetry, mechanical tests on different temperatures, and absorption of the saline solution. FTIR shows a proper embedding of the filler component into the polymer matrix and DSC presents a good stability at the living body temperature for all prepared samples. Micro and nanostructural aspects were evidenced by SEM and AFM microscopy, revealing that S3 has the most compact and uniform filler distribution and S4 has the most irregular one. Thus, S3 evidenced the best diametral tensile strength and S4 evidenced the weakest values. All samples present the best bending strength at 18 °C and fair values at 4 °C, with the best values being obtained for the S1 sample and the worst for S4. The lack of mechanical strength of the S4 sample is compensated by its best resistance at liquid penetration, while S1 is more affected by the liquid infiltrations. Finally, results show that PLA composites are suitable for biodegradable and disposable food packages, and the desired properties could be achieved by proper adjustment of the filler proportions.

9 October 2023 in Reaction Kinetics, Mechanisms and Catalysis
Verified
Journal Article
Closed access
PDF file
ATAncuţa Roxana Trifoi
Ancuţa Roxana Trifoi
Ecaterina MateiEcaterina Matei
Ecaterina Matei
Maria RâpăMaria Râpă
Maria Râpă
ABAndrei Constantin Berbecaru
Andrei Constantin Berbecaru
CPcasen panaitescu
casen panaitescu
Rami DOUKEHRami DOUKEH
Rami DOUKEH

9 June 2023 in Materials
Verified
Journal Article
Open access
PDF file
ABAndreea Bondarev
Andreea Bondarev
DPDaniela Roxana Popovici
Daniela Roxana Popovici
CCCatalina Calin
Catalina Calin
SMSonia Mihai
Sonia Mihai
EOElena-Emilia Oprescu
Elena-Emilia Oprescu
Rami DOUKEHRami DOUKEH
Rami DOUKEH
The aim of the study was to prepare effective low-cost green adsorbents based on spent black tea leaves for the removal of nitrate ions from aqueous solutions. These adsorbents were obtained either by thermally treating spent tea to produce biochar (UBT-TT), or by employing the untreated tea waste (UBT) to obtain convenient bio-sorbents. The adsorbents were characterized before and after adsorption by Scanning Electron Microscopy (SEM), Energy Dispersed X-ray analysis (EDX), Infrared Spectroscopy (FTIR), and Thermal Gravimetric Analysis (TGA). The experimental conditions, such as pH, temperature, and nitrate ions concentration were studied to evaluate the interaction of nitrates with adsorbents and the potential of the adsorbents for the nitrate removal from synthetic solutions. The Langmuir, Freundlich and Temkin isotherms were applied to derive the adsorption parameters based on the obtained data. The maximum adsorption intakes for UBT and UBT-TT were 59.44 mg/g and 61.425 mg/g, respectively. The data obtained from this study were best fitted to the Freundlich adsorption isotherm applied to equilibrium (the values R2 = 0.9431 for UBT and R2 = 0.9414 for UBT-TT), this assuming the multi-layer adsorption onto a surface with a finite number of sites. The Freundlich isotherm model could explain the adsorption mechanism. These results indicated that UBT and UBT-TT could serve as novel biowaste and low-cost materials for the removal of nitrate ions from aqueous solutions.

27 November 2024 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
AMAndrei Moldovan
Andrei Moldovan
ISIoan Sarosi
Ioan Sarosi
Stanca CucStanca Cuc
Stanca Cuc
Doina ProdanDoina Prodan
Doina Prodan
ATAdrian Catalin Taut
Adrian Catalin Taut
SMSorin Claudiu Man
Sorin Claudiu Man
This study focuses on the development of bioactive packaging materials by incorporating grape pomace and copper particles into polylactic acid (PLA) composites. The goal is to increase the shelf life of packaged foods while benefiting the health of consumers through the use of these active materials. 6 recipes of composite materials based on polylactic acid and Proviplast 2624 plasticizer were obtained. The additives added were: grape pomace, added at 0.5%, 1% and 1.5%, and copper particles, formed using PEG 600 + CuSO₄, added at 2%, 5% and 8%. Material characterization techniques: FTIR Spectroscopy, used to study the chemical structure. Differential scanning calorimetry (DSC): examined thermal transitions such as glass transition and melting temperatures. Thermogravimetric analysis (TGA) and differential thermogravimetry (DTG): evaluated thermal stability and degradation temperatures. Scanning electron microscopy (SEM) and atomic force microscopy (AFM): analyzed the surface morphology and structure. Mechanical tests: evaluated tensile strength, elongation at break and flexibility. Thermal property analyzes revealed that the additives acted as plasticizers, reducing the intermolecular forces between PLA chains, which decreased the glass transition temperature (Tg), cold crystallization temperature (Tcc) and melting temperature (Tm). The addition of grape pomace and copper particles decreased the degradation temperature of PLA composites, indicating a slight reduction in thermal stability. The transformation temperatures changed and the nature of the thermal transitions (exothermic or endothermic) varied with additive concentrations. Mechanical properties indicated a reduction in tensile strength with increasing additive concentration. Elongation at break and longitudinal modulus of elasticity increased significantly, especially with grape pomace, improving the flexibility of PLA. These changes indicate that the material can absorb more energy before breaking, making it more ductile and more suitable for flexible packaging applications. Increased flexibility and improved thermal resistance ensure that these materials can withstand the demands of packaging, handling and shipping. The combination of improved flexibility, thermal resistance and moderate tensile strength makes these PLA-based composites incorporated with grape pomace or copper particles, enhance the aspect of sustainability by recycling agricultural waste, making the material both ecological and functional, making it a viable option for active food packaging.

7 August 2017 in Comptes Rendus. Chimie
Verified
Journal Article
Closed access
Rami DOUKEHRami DOUKEH
Rami DOUKEH
MBMihaela Bombos
Mihaela Bombos
ATAncuta Trifoi
Ancuta Trifoi
OMOana Mihai
Oana Mihai
DPDaniela Popovici
Daniela Popovici
DBDorin Bombos
Dorin Bombos
In this study, the kinetics of thiophene (TH) hydrodesulfurization (HDS) over the Mo–Co–Ni-supported catalyst was investigated. Trimetallic catalyst was synthesized by pore volume impregnation and the metal loadings were 11.5 wt % Mo, 2 wt % Co, and 2 wt % Ni. A large surface area of 243 m 2 /g and a relatively large pore volume of 0.34 cm 3 /g for the fresh Mo–Co–Ni-supported catalyst indicate a good accessibility to the catalytic centers for the HDS reaction. The acid strength distribution of the fresh and spent catalysts, as well as for the support, was determined by thermal desorption of diethylamine (DEA) with increase in temperature from 20 to 600 °C. The weak acid centers are obtained within a temperature range between 160 and 300 °C, followed by medium acid sites up to 440 °C. The strong acid centers are revealed above 440 °C. We found a higher content of weak acid centers for fresh and spent catalysts as well as alumina as compared to medium and strong acid sites. The catalyst stability in terms of conversion as a function of time on stream in a fixed bed flow reactor was examined and almost no loss in the catalyst activity was observed. Consequently, this fact demonstrated superior activity of the Mo–Co–Ni-based catalyst for TH HDS. The activity tests by varying the temperature from 200 to 275 °C and pressure from 30 to 60 bar with various space velocities of 1–4 h −1 were investigated. A Langmuir–Hinshelwood model was used to analyze the kinetic data and to derive activation energy and adsorption parameters for TH HDS. The effect of temperature, pressure, and liquid hourly space velocity on the TH HDS activity was studied.

21 April 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
Rami DOUKEHRami DOUKEH
Rami DOUKEH
Maria RâpăMaria Râpă
Maria Râpă
Ecaterina MateiEcaterina Matei
Ecaterina Matei
Doina ProdanDoina Prodan
Doina Prodan
RGRomuald GYŐRGY
Romuald GYŐRGY
IBIonut Banu
Ionut Banu
Tungstophosphoric acid (H3PW12O40) supported on silica-coated magnetite nanoparticles has been prepared and used as a heterogeneous acid catalyst (Fe3O4@SiO2@HPW) in the condensation of benzaldehyde (B) with glycerol (Gly) for the production of cyclic acetals. Physicochemical techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectrometry (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and N2 physisorption were used to characterize the prepared catalyst. The effect of glycerol/benzaldehyde molar ratio (1/1 to 1/1.2), temperature (80–120 °C), and catalyst amount (1–5%) on glycerol conversion and the selectivity in main reaction products: benzoic acid, 2-phenyl-1,3-dioxolan-4-yl)methanol, 2-Phenyl-1,3-dioxan-5-ol, 2-phenyl-1,3-dioxolane, and methyl 2-hydroxy-3-phenylpropanoate was studied to evaluate the catalytic activity of the prepared Fe3O4@SiO2@HPW catalyst. The optimization of these process parameters was conducted using Box–Behnken design (BBD). Using the BBD methodology, the optimal parameters (120 °C, 1:1.15 glycerol: benzaldehyde, 5% catalyst) were determined, for a glycerol conversion of and cyclic acetals yield of 85.95% and 78.36%, respectively. The catalyst also exhibits excellent activity for glycerol acetalization with other aromatic aldehydes such as cinnamaldehyde, p-methyl-benzaldehyde, p-hydroxy-benzaldehyde, and vanillin.