Roberto Magueta

Mr. Roberto Magueta

Allbesmart LDA
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 August 2015 in IEEE Sensors Journal
Verified
Journal Article
Open access
RGRicardo Gonçalves
Ricardo Gonçalves
SRSergi Rima
Sergi Rima
RMRoberto Magueta
Roberto Magueta
Pedro PinhoPedro Pinho
Pedro Pinho
ACAna Collado
Ana Collado
MTManos M. Tentzeris
Manos M. Tentzeris
This paper presents the design of low-cost, conformal UHF antennas and RFID tags on two types of cork substrates: natural cork and agglomerate cork. Such RFID tags find an application in wine bottle and barrel identification, and in addition, they are suitable for numerous antenna-based sensing applications. This paper includes the high-frequency characterization of the selected cork substrates considering the anisotropic behavior of such materials. In addition, the variation of their permittivity values as a function of the humidity is also verified. As a proof-of-concept demonstration, three conformal RFID tags have been implemented on cork, and their performance has been evaluated using both a commercial Alien ALR8800 reader and an in-house measurement setup. The reading of all tags has been checked, and a satisfactory performance has been verified, with reading ranges spanning from 0.3 to 6 m. In addition, this paper discusses how inkjet printing can be applied to cork surfaces, and an RFID tag printed on cork is used as a humidity sensor. Its performance is tested under different humidity conditions, and a good range in excess of 3 m has been achieved, allied to a good sensitivity obtained with a shift of >5 dB in threshold power of the tag for different humid conditions.

6 June 2019 in IEEE Access
Verified
Journal Article
Open access
RMRoberto Magueta
Roberto Magueta
Daniel CastanheiraDaniel Castanheira
Daniel Castanheira
Adão SilvaAdão Silva
Adão Silva
RDRui Dinis
Rui Dinis
Atilio GameiroAtilio Gameiro
Atilio Gameiro
This paper proposes a hybrid multi-user equalizer for the uplink of broadband millimeter-wave massive multiple input/multiple output (MIMO) systems with dynamic subarray antennas. Hybrid subconnected architectures are more suitable for practical applications since the number of required phase shifters is lower than in fully connected architectures. We consider a set of only analog precoded users transmitting to a base station and sharing the same radio resources. At the receiver end, the hybrid multi-user equalizer is designed by minimizing the sum of the mean square error (MSE) of all subcarriers, considering a two-step approach. In the first step, the digital part is iteratively computed as a function of the analog part. It is considered that the digital equalizers are computed on a per subcarrier basis, while the analog equalizer is constant over the subcarriers and the digital iterations due to hardware constraints. In the second step, the analog equalizer with dynamic antenna mapping is derived to connect the best set of antennas to each radio frequency (RF) chain. For each subset of antennas, one antenna and a quantized phase shifter are selected at a time, taking into account all previously selected antennas. The results show that the proposed hybrid dynamic two-step equalizer achieves a performance close to the fully connected counterpart, although it is less complex in terms of hardware and signal processing requirements.

24 November 2016 in IEEE Transactions on Communications
Verified
Journal Article
Closed access
RMRoberto Magueta
Roberto Magueta
Daniel CastanheiraDaniel Castanheira
Daniel Castanheira
Adão SilvaAdão Silva
Adão Silva
Rui Miguel Henriques Dias DinisRui Miguel Henriques Dias Dinis
Rui Miguel Henriques Dias Dinis
Atilio GameiroAtilio Gameiro
Atilio Gameiro
The combination of millimeter wave (mmW) with massive MIMO is a promising approach to achieve the multi Gb/s required by future wireless systems. Fully digital architectures are not feasible due to hardware limitations, and thus, the design of signal processing techniques for hybrid analog-digital architectures is of paramount importance. In this paper, we propose a new hybrid iterative block space-time receiver structure for multiuser mmW massive MIMO systems. We consider low-complexity user terminals employing analog-only random precoding and a single RF chain. At the base station, a hybrid analog-digital equalizer/detector is designed to efficiently remove the multiuser interference. The analog and digital parts of the equalizer are jointly optimized using as a metric the average bit-error-rate. The specificities of the analog domain impose several constraints in the joint optimization. To efficiently handle these constraints, the analog part is selected from a dictionary based on the array response vectors. We also propose a simple, yet an accurate semi-analytical approach for obtaining the performance of the proposed hybrid receiver structure. The results show that the performance of the hybrid iterative equalizer is close to the fully digital counterpart after only a few iterations. Moreover, it clearly outperforms the linear receivers recently considered for hybrid mmW massive MIMO architectures.

29 July 2020 in Electronics
Verified
Journal Article
Open access
PDF file
JKJoumana Kassam
Joumana Kassam
MMManar Miri
Manar Miri
RMRoberto Magueta
Roberto Magueta
Daniel CastanheiraDaniel Castanheira
Daniel Castanheira
PPPedro Miguel Ferreira de Oliveira Pedrosa
Pedro Miguel Ferreira de Oliveira Pedrosa
Atilio GameiroAtilio Gameiro
Atilio Gameiro
Although millimeter-wave (mmWave) and massive multiple input multiple output (mMIMO) can be considered as promising technologies for future mobile communications (beyond 5G or 6G), some hardware limitations limit their applicability. The hybrid analog-digital architecture has been introduced as a possible solution to avoid such issues. In this paper, we propose a two-step hybrid multi-user (MU) equalizer combined with low complexity hybrid precoder for wideband mmWave mMIMO systems, as well as a semi-analytical approach to evaluate its performance. The new digital non-orthogonal multi carrier modulation scheme generalized frequency division multiplexing (GFDM) is considered owing to its efficient performance in terms of achieving higher spectral efficiency, better control of out-of-band (OOB) emissions, and lower peak to average power ratio (PAPR) when compared with the orthogonal frequency division multiplexing (OFDM) access technique. First, a low complexity analog precoder is applied on the transmitter side. Then, at the base station (BS), the analog coefficients of the hybrid equalizer are obtained by minimizing the mean square error (MSE) between the hybrid approach and the full digital counterpart. For the digital part, zero-forcing (ZF) is used to cancel the MU interference not mitigated by the analog part. The performance results show that the performance gap of the proposed hybrid scheme to the full digital counterpart reduces as the number of radio frequency (RF) chains increases. Moreover, the theoretical curves almost overlap with the simulated ones, which show that the semi-analytical approach is quite accurate.

20 January 2020 in Sensors
Verified
Journal Article
Open access
PDF file
RMRoberto Magueta
Roberto Magueta
Daniel CastanheiraDaniel Castanheira
Daniel Castanheira
PPPedro Miguel Ferreira de Oliveira Pedrosa
Pedro Miguel Ferreira de Oliveira Pedrosa
Adão SilvaAdão Silva
Adão Silva
Rui Miguel Henriques Dias DinisRui Miguel Henriques Dias Dinis
Rui Miguel Henriques Dias Dinis
Atilio GameiroAtilio Gameiro
Atilio Gameiro
Most of the previous work on hybrid transmit and receive beamforming focused on narrowband channels. Because the millimeter wave channels are expected to be wideband, it is crucial to propose efficient solutions for frequency-selective channels. In this regard, this paper proposes an iterative analog–digital multi-user equalizer scheme for the uplink of wideband millimeter-wave massive multiple-input-multiple-output (MIMO) systems. By iterative equalizer we mean that both analog and digital parts are updated using as input the estimates obtained at the previous iteration. The proposed iterative analog–digital multi-user equalizer is designed by minimizing the sum of the mean square error of the data estimates over the subcarriers. We assume that the analog part is fixed for all subcarriers while the digital part is computed on a per subcarrier basis. Due to the complexity of the resulting optimization problem, a sequential approach is proposed to compute the analog phase shifters values for each radio frequency (RF) chain. We also derive an accurate, semi-analytical approach for obtaining the bit error rate (BER) of the proposed hybrid system. The proposed solution is compared with other hybrid equalizer schemes, recently designed for wideband millimeter-wave (mmWave) massive MIMO systems. The simulation results show that the performance of the developed analog–digital multi-user equalizer is close to full-digital counterpart and outperforms the previous hybrid approach.

22 June 2022 in IEEE Transactions on Wireless Communications
Verified
Journal Article
Closed access
Daniel CastanheiraDaniel Castanheira
Daniel Castanheira
RMRoberto Magueta
Roberto Magueta
PPPedro Miguel Ferreira de Oliveira Pedrosa
Pedro Miguel Ferreira de Oliveira Pedrosa
Adão SilvaAdão Silva
Adão Silva
Rui Miguel Henriques Dias DinisRui Miguel Henriques Dias Dinis
Rui Miguel Henriques Dias Dinis
Atilio GameiroAtilio Gameiro
Atilio Gameiro
The use of efficient high-power amplifiers (HPAs) is critical for future millimeter-wave (mmWave) systems. HPAs can become highly nonlinear when operated near saturation, distorting the transmission signal. Therefore, the design of efficient solutions to mitigate nonlinear distortion (NLD) is of paramount importance. This article proposes a hybrid multiuser equalizer for the uplink of wideband mmWave massive MIMO systems. The equalizer is designed to mitigate both the multiuser interference (MUI) and inter-symbol interference (ISI), introduced by the multiple access channel, and the NLD, introduced by the user terminals HPA. The digital part of the hybrid equalizer is iterative and computed on a per subcarrier basis, to minimize the mean squared error between the transmitted and detected data. In the iterative processing, a feedback loop estimates and removes the distortion. The analog part is frequency-flat and its design assumes that the digital part efficiently removes the MUI, ISI and NLD. Performance results show a huge gain of the proposed hybrid nonlinear equalizer, when compared with linear ones. The nonlinear effects are almost completely removed, without significant error propagation effects, allowing a more efficient operation of the HPAs.