Metal–organic frameworks (MOFs) are emerging as novel flame retardants for polymers, which, typically, can improve their thermal stability and flame retardancy. However, there is a lack of specific studies on the thermal decomposition kinetics of MOF-based polymer composites, although it is known that they are important for the modeling of flaming ignition, burning, and flame spread over them. The thermal decomposition mechanisms of poly (methyl methacrylate) (PMMA) have been well investigated, which makes PMMA an ideal polymer to evaluate how fillers affect its decomposition process and kinetics. Thus, in this study, UiO-66, a common type of MOF, was embedded into PMMA to form a composite. Based on the results from the microscale combustion calorimeter, the values of the apparent activation energy of PMMA/UiO-66 composites were calculated and compared against those of neat PMMA. Furthermore, under cone calorimeter tests, UiO-66, at only 1.5 wt%, can reduce the maximum burning intensity and average mass loss rate of PMMA by 14.3% and 12.4%, respectively. By combining UiO-66 and SiO2 to form a composite, it can contribute to forming a more compact protective layer, which shows a synergistic effect on reducing the maximum burning intensity and average mass loss rate of PMMA by 22.0% and 14.7%, respectively.
The construction industry has witnessed a surge in heat-related accidents alongside rising summertime temperatures, exposing workers to potential injuries. The absence of specific heat stress standards by the Occupational Safety and Health Administration (OSHA) underscores the urgent need for more comprehensive and interactive educational materials to prevent such incidents in construction projects. This study proposes the adoption of an interactive Virtual Reality (VR) application to offer construction workers realistic and effective training, mitigating heat-related injuries. During the training sessions, VR headsets were utilized to immerse workers in two lifelike scenarios: (1) Addressing self-care during heat exhaustion; (2) Assisting a coworker experiencing heat exhaustion. A case study evaluated the effectiveness of the proposed VR training for 82 construction workers from two companies. Company A had traditional training, while Company B used VR training. Both groups took pre- and post-assessment surveys with six questions. The pre-assessment found no significant knowledge difference between the groups. After training, VR showed a significant reduction in incorrect answers compared to traditional training. Statistical tests confirmed the superiority of VR training (p-value = 0.00152 < 0.05), suggesting its effectiveness in preventing heat-related injuries in construction compared to traditional training methods.
The intumescent flame retardant (IFR) technique is an alternative to halogen-based flame retardants for reducing fire hazards in polymers. However, IFR has drawbacks like unsatisfactory flame-retardant efficiency and high loading requirements. In this study, MIL-125 (Ti-based metal–organic framework) is added to ABS/IFR composites to improve flame retardancy and reduce smoke emissions. Thermogravimetric analysis (TGA) results indicate that combining ammonium polyphosphate (APP) and expandable graphite (EG) increases charred residue and slows mass loss compared with the original ABS resin. The ABS/IFR/MIL-125 system stabilizes the char layer, serving as a protective shield against combustible gases during combustion. Additionally, MIL-125 enhances performance in microscale combustion calorimetry (MCC) flammability testing. In fire tests (UL-94, limiting oxygen index (LOI), and cone calorimeter), the ABS/IFR/MIL-125 system achieves a UL-94 V0 rating and the highest LOI value of 31.5% ± 0.1%. Peak heat lease rate (PHRR) values in the cone calorimeter are reduced by 72% with 20 wt.% of additives, and smoke production decreases by 53% compared with neat ABS. These results demonstrate the efficient synergistic effects of MIL-125 and IFR additives in improving the formation and stability of the intumescent char layer, thereby protecting ABS from intense burning.