Serhii Yakhin

Serhii Yakhin

Construction and Vocational Education, Poltava State Agrarian University, Poltava, Poltavs’ka Oblast’, Ukraine
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 December 2021 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
RPRuslan Puzyr
Ruslan Puzyr
VSViktor Shchetynin
Viktor Shchetynin
VVViktor Vorobyov
Viktor Vorobyov
ASAlexandr Salenko
Alexandr Salenko
RARoman Arhat
Roman Arhat
INIgor Negrebetskyi
Igor Negrebetskyi
This paper shows that the technological preparation of production accounts for 20‒70 % of the total labor intensity of technical preparation. An important role belongs to the applied programs of finite-element modeling. However, such software packages often cannot be purchased by small-scale industrial enterprises for various reasons. Therefore, special empirical and analytical calculation models are used, which have proved to be quite effective in typical metal processing processes. Drawing a cylindrical hollow part was used as an example of the improved analytical dependence to calculate meridional tensile stresses. Existing analytical models of the process accounted for the bending moment through additional stresses. However, this approach only roughly described the deformation process. It was possible to refine the existing analytical dependences by introducing a term into the differential equilibrium equations that takes into consideration the bending moment that acts in the meridional direction when a workpiece passes the rounding on the matrix edge. Analysis of the obtained expression revealed that the bending of a workpiece gives rise to the stretching meridional stresses, which depend on the ratio of the squares of the thickness of the workpiece and the radius of the matrix rounding. The results of the estimation data from the numerical and theoretical models coincided for small values of the radius of the matrix rounding of 1‒2 mm, which confirms the adequacy of the analytical solution. In the numerical model, there is an extreme point where the tensile stresses have a minimum and, after it, begin to increase; this corresponds to the matrix rounding radius of 5 mm

19 February 2024 in PRZEGLĄD ELEKTROTECHNICZNY
Verified
Journal Article
Closed access
ASAnatolii Semenov
Anatolii Semenov
SPStanislav Popov
Stanislav Popov
Serhii YakhinSerhii Yakhin
Serhii Yakhin
BYBauyrzhan Yeleussinov
Bauyrzhan Yeleussinov
TSTamara Sakhno
Tamara Sakhno
To determine the photobiological safety of UV lamps, the following measurements were carried out: spectral irradiance, total actinic irradiance in the wavelength range of 200-400 nm, and irradiance in the UVA range (320-400 nm). These parameters were measured using the optical radiation system OST-300. The photobiological safety of LUF 40-1, LE 15 lamps and their radiation risk group are established in accordance with EN 62471. The levels of UV radiation generated by LE 15 low pressure discharge lamps at a distance of 0.25 m belong to the high risk group (GR3), and LUF 40-1 - in the group of insignificant risk (GR1). Calculations and recommendations on safe radiation doses when using lamps in electrotechnical systems of photobiological influence are given

24 December 2024 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
SKStanislav Koval'CHuk
Stanislav Koval'CHuk
OGOleksii Goryk
Oleksii Goryk
Serhii YakhinSerhii Yakhin
Serhii Yakhin
AAAnatolii Antonets
Anatolii Antonets
An exact analytical solution to the problem of plane transverse bending of a section of a narrow multilayer beam under the action of a normal load on the longitudinal faces, distributed according to the law of the trapezoid, is presented. The solution is constructed using the principle of superposition on the basis of the authors’ general solutions to the problems of bending multilayer consoles under the action of loads at the free end, uniformly and linearly distributed load on longitudinal faces. On its basis, separate interchanges for multilayer beams with different methods of fixing the ends were obtained: hinged, rigid and combined. The obtained relations make it possible to determine the stress-strain state of multilayer beams with an arbitrary number of homogeneous (orthotropic, isotropic) and functional-gradient layers, taking into account transverse shear and compression deformations.

7 June 2024 in Municipal economy of cities
Verified
Journal Article
Open access
PDF file
Людмила БондарЛюдмила Бондар
Людмила Бондар
NPNataliia Popovych
Nataliia Popovych
VSVolodymur Shulhin
Volodymur Shulhin
Serhii YakhinSerhii Yakhin
Serhii Yakhin
The article summarises the first domestic experience in designing and implementing electrochemical (cathodic) protection against corrosion of reinforcement in reinforced concrete structures exposed to aggressive environments. It considers examples of such protection for structures of many buildings and constructions with different operation conditions. The study examines the first instance in the domestic practice of testing electrochemical (cathodic) protection against reinforcement corrosion in concrete columns. The reinforcement of reinforced concrete structures in the lower part of the columns underwent corrosion due to frequent spills of aggressive solutions from the floor. There were drainage trays on the floor located near the columns that need protection, parallel to their transverse rows, to collect and remove these spills. These trays served to house linear anodes of cathodic protection. Anodes made of individual metal rods were placed on the bottom of the trays and covered with an electrically conductive solution. After determining the anodic areas on the reinforced concrete floor beams, they developed a project for cathodic reinforcement protection. Coating the reinforced concrete beams with polymer paints during the repair works did not lead to a decline in corrosion processes on their fittings in some areas. Given the initial conditions, the decision was to adopt an electrochemical protection scheme with selective distribution of metal foil anodes on conductive paint on the surface of the beams. The conducted examination of the concentrated sulfuric acid shop showed that reinforcement corrosion in reinforced concrete structures occurs under the action of solutions of acid spills and their steam. Corrosion intensifies in some parts of structures. In the columns, such places appear in the lower sections, where the structures are in contact with the environment (spills). In the proposed cathodic protection system, a regulated current source allowed for obtaining a constant current of up to 10 A. A 1–2 cm thick layer of electrically conductive solution was applied to the lower part of the columns under restoration. Lead anodes were embedded into the conductive solution. A working project was developed for cathodic protection of the reinforced concrete deck of the bridge in its reconstruction on the highway. The bridge suffered significant damage primarily due to corrosion in the reinforced concrete deck. In the existing conditions, active methods of protecting reinforced concrete structures have proven more profitable. The structural solution of the bridge facilitates the use of electrochemical protection. The concrete protective layer of the roadway includes reinforcing metal grids that serve as anodes. All reinforcement of reinforced concrete structures is a part of a single electrical circuit. The research goal is to improve the technological properties of the reinforcement electrochemical protection installation in reinforced concrete slabs. The installation solves the task of reducing labour costs and material consumption of protection systems. A solution to this task is freeing the seam between the plates from filling materials and laying a flexible electrical insulating tape in the formed gap, which has a longitudinal perforated surface in the form of a reach-through in the middle. When laying, the tape receives a U-shaped cross-section, creating a trough in the gap between the plates that has a perforated bottom. A wire anode fits into the created trough. The proposed device is easy to implement and replace elements during operation. The galvanic anode, which simultaneously serves as a reinforcing element of the stretched zone in reinforced concrete beams, is characterised by its versatility. The reinforcing element is made in the shape of a tape, while the metal has a higher electrochemical potential than the reinforcing metal. This metal tape is placed on the conductive solution and connected to the reinforcing frame of the beam. Further improvement of the cathodic protection systems of the reinforced concrete structures needs to draw on the accumulated practical experience of its application. Keywords: reinforcement of reinforced concrete structures, corrosion, cathodic protection.

30 June 2025
Verified
Journal Article
Open access
PDF file
Serhii YakhinSerhii Yakhin
Serhii Yakhin
NPNataliia Popovych
Nataliia Popovych
OPOleksandr Petrash
Oleksandr Petrash
Volodymyr MuravlovVolodymyr Muravlov
Volodymyr Muravlov
OROleksandr Redkin
Oleksandr Redkin
This article explores the contemporary challenges and strategic opportunities in the field of construction and environmental management within the framework of Ukraine’s post-war recovery. The full-scale war has caused unprecedented destruction of residential, industrial, and infrastructure assets, alongside severe environmental degradation. These events have underscored the necessity of a systematic and integrated approach to rebuilding, one that prioritizes not only physical reconstruction but also sustainable development, ecological balance, and technological modernization. The study positions strategic and project management as core instruments for the effective execution of national recovery programs. It emphasizes the role of internationally recognized standards–such as the PMBOK Guide and ISO frameworks–in enhancing the coherence, transparency, and efficiency of reconstruction initiatives. Moreover, the article addresses the pressing need for synchronization between governmental institutions, private sector actors, and civil society organizations to ensure a coordinated response to the country’s complex restoration needs. A distinctive feature of the proposed approach is its integration of environmental considerations into the core of the reconstruction process. Rather than treating ecological concerns as secondary, the model highlights how sustainability can be embedded within project lifecycles, from conceptualization to implementation. Special attention is given to the alignment of environmental restoration with infrastructural development, such that ecosystems and urban spaces are rehabilitated concurrently. The article also delves into the institutional and legislative prerequisites for implementing project-based recovery models at national, regional, and local levels. It proposes a comprehensive architecture of governance that includes capacity-building, digitalization of management processes, public engagement, and investment mobilization. The role of educational institutions and professional development in fostering a new generation of project managers with strategic foresight is highlighted as a vital enabler of long-term resilience. Ultimately, the research underscores the importance of moving beyond reactive, fragmented reconstruction efforts toward a proactive, planned, and future-oriented recovery strategy. The findings are intended to inform policymakers, industry leaders, and scholars concerned with rebuilding post-conflict societies through innovative, sustainable, and systems-based approaches.

4 July 2025 in Municipal economy of cities
Verified
Journal Article
Open access
PDF file
RPR. Petrash
R. Petrash
OPO. Petrash
O. Petrash
VSV. Shulgin
V. Shulgin
Людмила БондарЛюдмила Бондар
Людмила Бондар
Serhii YakhinSerhii Yakhin
Serhii Yakhin
This study presents an analytical comparison of alternative foundation solutions for a frame-type agricultural building, with a specific focus on the efficiency of deep soil mixing technology employing soil–cement piles. The research evaluates three foundation types: reinforced bored concrete piles, bored injection piles, and soil–cement piles produced using in-situ mixing technology. A comprehensive techno-economic comparison was conducted based on the reduced cost coefficient method to determine the most cost-effective solution. The findings demonstrate that soil–cement piles provide the most economical option among the three examined alternatives. This type of pile foundation showed the lowest value of reduced costs, making it the most financially viable solution for the construction of agricultural structures. Additionally, significant savings in material consumption – particularly concrete and reinforcement steel – were identified, contributing further to the cost-effectiveness of the proposed solution. The practical benefits of using soil–cement foundations extend beyond direct cost savings. These elements are especially suitable for agricultural applications, including buildings for livestock farming, greenhouses, grain depots, food processing facilities, and auxiliary structures. One of the major logistical advantages of deep soil mixing technology is its adaptability to remote rural areas, where infrastructure is limited. The use of local soils mixed with cementitious binders directly on-site minimizes the transportation of bulk materials, reducing both environmental impact and logistical expenses. Mobile soil-mixing equipment enables flexible and rapid deployment, enhancing project execution efficiency in field conditions. Furthermore, the technology eliminates the need for extensive material storage or large construction staging areas, making it particularly advantageous for projects located far from urban centers. The research confirms the technical and economic viability of soil–cement piles constructed via deep soil mixing technology as a rational and sustainable foundation solution for agricultural buildings, particularly in remote or infrastructure-limited settings. The outcomes of this study may serve as a foundation for further research on optimizing the structural performance and cost-efficiency of soil–cement systems in agricultural settings. Moreover, the findings could assist engineers and project planners in selecting sustainable and locally adaptable solutions for rural construction challenges.