In this paper, a metasurface-based multiple-input multiple-output (MIMO) antenna with high isolation between antenna elements is presented. The main patch radiator is sandwiched between a metasurface and a ground plane to achieve performance enhancement. The fabricated single element antenna has a compact size of $0.85\lambda _{0} \times 0.85\lambda _{0} \times 0.038\lambda _{0}$ . The antenna exhibits a wideband operational bandwidth from 3.27 to 3.82 GHz for $\vert \text{S}_{11}\vert < -10$ , which corresponds to a fractional bandwidth of 15.5%. Moreover, stable radiation patterns with a peak gain of 8.1 dBi are also achieved across the operating band. The proposed single element antenna is characterized for $2 \times 2$ MIMO system by translating each antenna element orthogonal to each other. A decoupling structure consisting of slots and metallic strip with shorting pins is used to improve the isolation between the MIMO elements. The shorting pins connect the metallic strips (located between MIMO elements) on the metasurface and ground plane. These slots on ground plane and shorting pins affect the electromagnetic field distribution and consequently reduce the mutual coupling. The fabricated MIMO antenna has a compact size of $1.75\lambda _{0}\times 1.75\lambda _{0} \times 0.038\lambda _{0}$ . The proposed 4 port ( $2\times 2$ ) MIMO antenna provides 15.9% of 10 dB impedance bandwidth from 3.3 to 3.87 GHz with a peak gain of 8.72 dBi. Moreover, the proposed MIMO antenna offers excellent diversity performance, isolation between antenna elements is very high (>32dB), ECC is lower than 0.001, and diversity gain is 9.99 dB very close to the ideal value of 10dB. Owing to these features, the proposed MIMO antenna can be a good candidate for 5G Sub-6 GHz (n78 band) smart devices and sensors.

In this article, a 4-port circularly polarized (CP) multiple-input multiple-output (MIMO) antenna at 5.9 GHz is presented for the vehicle to everything (V2X) communications. A novel hybrid decoupling structure consisting of circular ring parasites and defected ground structure (DGS) is used to reduce the mutual coupling between the MIMO elements. The circular ring parasites are incorporated between the antennas to reduce the mutual coupling between perpendicular antennas. Whereas, the DGS significantly reduces the mutual coupling between adjacent antennas. These circular ring parasites and DGS affect the electromagnetic field distribution and consequently reduce the mutual coupling. The effectiveness of the decoupling structure is explained through transmission coefficient and surface current distribution. The simulated and measured results show that the proposed MIMO antenna provides overlapping $\text{S}_{\mathrm {11 {}}}$ (−10 dB) and axial ratio (3-dB) bandwidth of 2.04% (5.82 – 5.94 GHz) with a peak gain of 7.68 dBic. Moreover, the fabricated MIMO antenna offers excellent diversity performance, isolation between antenna elements is very high (>34dB), envelope correlation coefficient (ECC) is lower than 0.001, and diversity gain is 9.99 dB, very close to the ideal value of 10 dB. Furthermore, the link budget for the proposed MIMO system is calculated to check the suitability for V2X communications which shows that the antenna can communicate between them over a distance of 1.5 kilometers with a 21 dBm of transmit power. Owing to these qualities, the proposed MIMO antenna can be an excellent choice for V2X MIMO communications.

This paper presents the performance improvement of a co-planar waveguide rectangularly notched UWB-MIMO antenna. The isolation and gain of the antenna are enhanced by using a parasitic isolator. The antenna consists of four microstrip patch antennas and an isolator. The UWB characteristic of the antenna is achieved by truncating the lower ends of the radiating patch by a semicircle. The rectangular notch characteristic is obtained by adding two electromagnetic bandgap structures on the backside of the antenna, which is attached to the radiator via shorting pin. The performance, especially the decoupling of the MIMO antenna is improved by using a novel parasitic decoupler, which is placed between the antennas to receive uncorrelated signals. The decoupling structure consists of a square shape metallic element with a circular slot inside and a half-semicircle slot edged at each corner. Four rectangular metallic stubs are extended from opposite parallel sides to improve further isolation. The simulated and measured results show that the antenna has a rectangular notch band (5.25–5.85 GHz) across the working band of 3–12.8 GHz. In addition, the antenna has a planar structure with an overall size of 60 × 60 × 1.52 mm³ and offers stable gain, reduced mutual coupling (<−21 dB), and lower envelop correlation (<0.001).

This paper presents a compact two-element MIMO antenna with improved isolation for triple-band applications. The antenna consists of two radiating elements with the shared ground plane and a novel decoupling structure. Each antenna element has three stubs with different lengths, which work as quarter-wavelength monopoles to give a triple-band operation. The decoupling system is made by etching various slots in an inverted H-shape stub attached to two quarter-circles at its lower ends. The simulated and measured results show that the antenna operates (|S₁₁| < −10 dB) at the key frequency bands of 2.4 GHz (2.29–2.47 GHz), 3.5 GHz (3.34–3.73 GHz), and 5.5 GHz (4.57–6.75 GHz) with a stable gain and radiation patterns. Moreover, the MIMO antenna shows good isolation characteristics. The isolation is more than 20 dB, the envelope correlation coefficient is <0.003, and diversity gain is 9.98 dB, within the frequency band of interest. Furthermore, the MIMO antenna has a compact size of 48 mm × 31 mm × 1.6 mm. These features of the proposed antenna make it a suitable candidate for I.S.M., 5G sub-6 GHz, and WLAN applications.

In this article, a single-layer frequency selective surface (FSS)-loaded compact coplanar waveguide (CPW)-fed antenna is proposed for very high-gain and ultra-wideband applications. At the initial stage, a geometrically simple ultra-wideband (UWB) antenna is designed which contains CPW feed lines and a multi-stub-loaded hexagonal patch. The various stubs are inserted to improve the bandwidth of the radiator. The antenna operates at 5–17 GHz and offers 6.5 dBi peak gain. Subsequently, the proposed FSS structure is designed and loaded beneath the proposed UWB antenna to improve bandwidth and enhance gain. The antenna loaded with FSS operates at an ultra-wideband of 3–18 GHz and offers a peak gain of 10.5 dBi. The FSS layer contains 5 × 5 unit cells with a total dimension of 50 mm × 50 mm. The gap between the FSS layer and UWB antenna is 9 mm, which is fixed to obtain maximum gain. The proposed UWB antenna and its results are compared with the fabricated prototype to verify the results. Moreover, the performance parameters such as bandwidth, gain, operational frequency, and the number of FSS layers used in the proposed antenna are compared with existing literature to show the significance of the proposed work. Overall, the proposed antenna is easy to fabricate and has a low profile and simple geometry with a compact size while offering a very wide bandwidth and high gain. Due to all of its performance properties, the proposed antenna system is a strong candidate for upcoming wideband and high-gain applications.