New magnetic iron oxide (Fe₃O₄)/activated charcoal (AC)/β-cyclodextrin (CD)/sodium alginate (Alg) polymer nanocomposite materials were prepared by direct mixing of the polymer matrix with the nanofillers. The obtained materials were utilized as nano-adsorbents for the elimination of methylene blue (MB), a hazardous water-soluble cationic dye, from aqueous solutions, and showed excellent regeneration capacity. The formation of the nanocomposites was followed by high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometry (EDX), Fourier-transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), X-ray diffraction (XRD) and adsorption of N₂ at −196 °C. The rate of adsorption was investigated varying several factors, namely contact time, pH, amount of adsorbent and MB concentration on the adsorption process. Studies dealing with equilibrium and kinetics were carried out in batch conditions. The obtained results indicated that the removal rate of MB was 99.53% in 90 min. Langmuir’s isotherm fitted better to the equilibrium data of MB. Fe₃O₄/AC/CD/Alg polymer beads shows amazing adsorption capacities in the elimination of cationic dyes (2.079 mg/g for polymer gel beads and 10.63 mg g⁻¹ for dry powder beads), in comparison to other adsorbent materials. The obtained adsorbent is spherical with hydrophobic cross-linked surface properties that enable an easy recovery without any significant weight loss of in the adsorbent used.

Oil pollutants, due to their toxicity, mutagenicity, and carcinogenicity, are considered a serious threat to human health and the environment. Petroleum hydrocarbons compounds, for instance, benzene, toluene, ethylbenzene, xylene, are among the natural compounds of crude oil and petrol and are often found in surface and underground water as a result of industrial activities, especially the handling of petrochemicals, reservoir leakage or inappropriate waste disposal processes. Methods based on the conventional wastewater treatment processes are not able to effectively eliminate oil compounds, and the high concentrations of these pollutants, as well as active sludge, may affect the activities and normal efficiency of the refinery. The methods of removal should not involve the production of harmful secondary pollutants in addition to wastewater at the level allowed for discharge into the environment. The output of sewage filtration by coagulation and dissolved air flotation (DAF) flocculation can be transferred to a biological reactor for further purification. Advanced coagulation methods such as electrocoagulation and flocculation are more advanced than conventional physical and chemical methods, but the major disadvantages are the production of large quantities of dangerous sludge that is unrecoverable and often repelled. Physical separation methods can be used to isolate large quantities of petroleum compounds, and, in some cases, these compounds can be recycled with a number of processes. The great disadvantage of these methods is the high demand for energy and the high number of blockages and clogging of a number of tools and equipment used in this process. Third-party refinement can further meet the objective of water reuse using methods such as nano-filtration, reverse osmosis, and advanced oxidation. Adsorption is an emergency technology that can be applied using minerals and excellent materials using low-cost materials and adsorbents. By combining the adsorption process with one of the advanced methods, in addition to lower sludge production, the process cost can also be reduced.

Among carbon-based nanomaterials, carbon dots (CDs) have received a surge of interest in recent years due to their attractive features such as tunable photoluminescence, cost effectiveness, nontoxic renewable resources, quick and direct reactions, chemical and superior water solubility, good cell-membrane permeability, and simple operation. CDs and their composites have a large potential for sensing contaminants present in physical systems such as water resources as well as biological systems. Tuning the properties of CDs is a very important subject. This review discusses in detail heteroatom doping (N-doped CDs, N-CDs) and the formation of metal-based CD nanocomposites using a combination of matrices, such as metals and metal oxides. The properties of N-CDs and metal-based CDs nanocomposites, their syntheses, and applications in both chemical sensing and biosensing are reviewed.