The subject of this paper is the recently developed 2.45 GHz microwave micro torch, which produces a surface wave discharge operating at low power of 25 W. Microwave plasma is generated using surfatron resonator in pure argon and argon with admixtures (up to 1.7%) of nitrogen and oxygen at the gas flow rate of 3 Slm. Two different configurations are used—a standard one and one with an additional metallic plate at the surfatron resonator end limiting the surface wave propagation along the plasma. Plasma parameters like temperatures (rotational, vibrational, electron) along the plasma torch axis as well as distribution of selected active particles are determined. The numeric simulation of the discharge and its properties are included, too. Finally, surface temperature of the fresh pork skin affected by the active particles flow is determined using thermo camera images. The obtained results show applicability of this system for the surface treatment of biological objects and possibility to modify the torch conditions by molecular gases additions.

The transformation of our linear “take-make-waste” system to a cyclic flow of materials and energy is a priority task for society, but the circular use of waste streams from one industry/sector as a material input for another must be completely safe. The need for new advanced technologies and methods ensuring both microbiological safety and the removal of potential chemical residues in used materials and products is urgent. Non-thermal atmospheric plasma (cold atmospheric plasma—CAP) has recently attracted great research interest as an alternative for operative solutions of problems related to safety and quality control. CAP is a powerful tool for the inactivation of different hazardous microorganisms and viruses, and the effective decontamination of surfaces and liquids has been demonstrated. Additionally, the plasma’s active components are strong oxidizers and their synergetic effect can lead to the degradation of toxic chemical compounds such as phenols and azo-dyes.

Demand for food quality and extended freshness without the use of harmful chemicals has become a major topic over the last decade. New technologies are using UV light, strong electric field, ozone and other reactive agents to decontaminate food surfaces. The low-power non-equilibrium (cold) atmospheric pressure operating plasmas effectively combines all the qualities mentioned above and thus, due to their synergetic influence, promising results in fruit surface decontamination can be obtained. The present paper focuses on the applicability of the recently developed microwave surface wave sustained plasma torch for the treatment of selected small fruit. Optical emission spectroscopy is used for the determination of plasma active particles (radicals, UV light) and plasma parameters during the fruit treatment. The infrared camera images confirm low and fully applicable heating of the treated surface that ensures no fruit quality changes. The detailed study shows that the efficiency of the microbial decontamination of selected fruits naturally contaminated by microorganisms is strongly dependent on the fruit surface shape. The decontamination of the rough strawberry surface seems inefficient using the current configuration, but for smooth berries promising results were obtained. Finally, antioxidant activity measurements demonstrate no changes due to plasma treatment. The results confirm that the MW surface wave sustained discharge is applicable to fruit surface decontamination.

Cold atmospheric plasma (CAP) applications in various fields, such as biology, medicine and agriculture, have significantly grown during recent years. Many new types of plasma sources operating at atmospheric pressure in open air were developed. In order to use such plasmas for the treatment of biological systems, plasma properties should fulfil strong requirements. One of the most important is the prevention from heating damage. That is why in many cases, the post-discharge region is used for treatment, but the short living particles in the active discharge zone and reactions with them are missed in that case. We use the active region of surface-wave-sustained argon plasma for biological systems treatment. The previous investigations showed good bactericidal, virucidal, seeds germination and decontamination effects at a short treatment time, but the discharge conditions for bio-medical applications need specific adjustment. A detailed theoretical and experimental investigation of the plasma characteristics and their possible optimization in order to meet the requirements for bio-medical applications are presented in this paper. The length of the plasma torch, the temperature at the treatment sample position and the microwave radiation there are estimated and optimized by the appropriate choice of discharge tube size, argon flow rate and microwave power.

In this paper, an investigation of the interaction of a surface-wave-sustained argon plasma torch with liquids is presented. The plasma is produced by an electromagnetic wave traveling along the plasma–dielectric interface, and at the same time, the plasma is a part of this waveguide structure. Because the interaction of the plasma torch with water (liquid) results in modifications of the properties of both the treated water and the plasma itself, a detailed study of the effects in both media is required. The results of the experimental investigation of a surface-wave-sustained argon plasma torch interaction with liquids show significant changes in the plasma parameters, such as the electron excitation temperature T_e and the average rotation temperature T_rot. In addition, mechanical waves are produced both in the meniscus surface and in the plasma torch by the interaction between the plasma torch (ionized gas with charged particles and electric field) and the liquid surface, which is different from the effects produced by a neutral gas jet on a liquid surface. As a result of the plasma–water interaction, the water’s chemical and physical characteristics, such as the water conductivity, pH, and H₂O₂ concentration, are modified. As a possible application for water purification, the performed SWD treatment of model wastewater shows a significant variation in nitrate, ammonium, phosphate, and COD (chemical oxygen demand) concentration as a result of the treatment.

Diabetic neuropathy (DN) is a common complication of long-lasting type 1 and type 2 diabetes, with no curative treatment available. Here, we tested the effect of the incretin mimetic liraglutide in DN in mice with early-stage type 1 diabetes bred in a standard laboratory or enriched environment. With a single i.p. injection of streptozotocin 150 mg/kg, we induced murine diabetes. Liraglutide (0.4 mg/kg once daily, i.p. for ten days since the eighth post-streptozotocin day) failed to decrease the glycemia in the diabetic mice; however, it alleviated their antinociceptive behavior, as tested with formalin. The second phase of the formalin test had significantly lower results in liraglutide-treated mice reared in the enriched environment vs. liraglutide-treated mice under standard conditions [2.00 (0.00–11.00) vs. 29.00 (2.25–41.50) s, p = 0.016]. Liraglutide treatment, however, decreased the threshold of reactivity in the von Fray test. A significantly higher neopterin level was demonstrated in the diabetic control group compared to treatment-naïve controls and the liraglutide-treated diabetic mice (p < 0.001). The glutamine/glutamate ratio in both liraglutide-treated groups, either reared under standard conditions (p = 0.003) or an enriched environment (p = 0.002), was significantly higher than in the diabetic controls. This study demonstrates an early liraglutide effect on pain sensation in two streptozotocin-induced diabetes mouse models by reducing some inflammatory and oxidative stress parameters.