Tianyao Shen

Mr. Tianyao Shen

Monash University
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 March 2021 in Sensors
Verified
Journal Article
Open access
PDF file
WWWeichen WEI
Weichen WEI
Bijan ShirinzadehBijan Shirinzadeh
Bijan Shirinzadeh
RNRohan Nowell
Rohan Nowell
MGMohammadali Ghafarian
Mohammadali Ghafarian
MAMohamed Ammar
Mohamed Ammar
TSTianyao Shen
Tianyao Shen
Solid-State LiDAR (SSL) takes an increasing share of the LiDAR market. Compared with traditional spinning LiDAR, SSLs are more compact, energy-efficient and cost-effective. Generally, the current study of SSL mapping is limited to adapting existing SLAM algorithms to an SSL sensor. However, compared with spinning LiDARs, SSLs are different in terms of their irregular scan patterns and limited FOV. Directly applying existing SLAM approaches on them often increase the instability of a mapping process. This study proposes a systematic design, which consists of a dual-LiDAR mapping system and a three DOF interpolated six DOF odometry. For dual-LiDAR mapping, this work uses a 2D LiDAR to enhance a 3D SSL performance on a ground vehicle platform. The proposed system takes a 2D LiDAR to preprocess the scanning field into a number of feature sections according to the curvatures on the 2D fraction. Subsequently, this section information is passed to 3D SSL for direction feature selection. Additionally, this work proposes an odometry interpolation method which uses both LiDARs to generate two separated odometries. The proposed odometry interpolation method selectively determines the appropriate odometry information to update the system state under challenging conditions. Experiments are conducted in different scenarios. The results proves that the proposed approach is able to utilise 12 times more corner features from the environment than the comparied method, thus results in a demonstrable improvement in its absolute position error.

3 June 2020 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
MGMohammadali Ghafarian
Mohammadali Ghafarian
BSBijan Shirinzadeh
Bijan Shirinzadeh
Ammar Al-JodahAmmar Al-Jodah
Ammar Al-Jodah
TDTilok Kumar Das
Tilok Kumar Das
WWWeichen WEI
Weichen WEI
TSTianyao Shen
Tianyao Shen
This paper presents the design and experimental investigation of a piezo-driven monolithic compliant 3-PUU (1 prismatic joint (P-joint) and 2 universal joints (U-joints)) XYZ micro/nano manipulator with a high bandwidth frequency and a large workspace. The manipulator is manufactured using a 3D-printing technique, thus a monolithic structure is guaranteed. This feature allows the manipulator to work smoothly with high resolution, accuracy, and repeatability, and simultaneously, it avoids all the deficiencies of non-monolithic designs such as backlash, wear, and friction. Analytical and computational studies are conducted to investigate and confirm the performances of the manipulator. Additionally, an experimental study is performed to verify the analytical and computational results. The workspace is calculated using the three methods, and their relative errors along each axis are shown to validate the accuracy of the results. The tracking performances of the manipulator are validated in a feedback control strategy. Moreover , the proposed manipulator demonstrates the motion resolution of 23 nm, 24 nm, and 18 nm along X, Y, and Z axes, respectively. Finally, the experimental frequency test supports the computational results and confirms the manipulator’s high bandwidth frequency.

22 March 2020 in Sensors
Verified
Journal Article
Open access
PDF file
TSTianyao Shen
Tianyao Shen
Bijan ShirinzadehBijan Shirinzadeh
Bijan Shirinzadeh
Yongmin ZhongYongmin Zhong
Yongmin Zhong
JSJulian Smith
Julian Smith
JPJoshua Pinskier
Joshua Pinskier
MGMohammadali Ghafarian
Mohammadali Ghafarian
The mechanical behaviour of adherent cells when subjected to the local indentation can be modelled via various approaches. Specifically, the tensegrity structure has been widely used in describing the organization of discrete intracellular cytoskeletal components, including microtubules (MTs) and microfilaments. The establishment of a tensegrity model for adherent cells has generally been done empirically, without a mathematically demonstrated methodology. In this study, a rotationally symmetric prism-shaped tensegrity structure is introduced, and it forms the basis of the proposed multi-level tensegrity model. The modelling approach utilizes the force density method to mathematically assure self-equilibrium. The proposed multi-level tensegrity model was developed by densely distributing the fundamental tensegrity structure in the intracellular space. In order to characterize the mechanical behaviour of the adherent cell during the atomic force microscopy (AFM) indentation with large deformation, an integrated model coupling the multi-level tensegrity model with a hyperelastic model was also established and applied. The coefficient of determination between the computational force-distance (F-D) curve and the experimental F-D curve was found to be at 0.977 in the integrated model on average. In the simulation range, along with the increase in the overall deformation, the local stiffness contributed by the cytoskeletal components decreased from 75% to 45%, while the contribution from the hyperelastic components increased correspondingly.