Cotton root rot (CRR) is a persistent soilborne fungal disease that is devastating to cotton in the southwestern U.S. and Mexico. Research has shown that CRR can be prevented or at least mitigated by applying a fungicide at planting, but the fungicide should be applied precisely to minimize the quantity of product used and the treatment cost. The CRR-infested areas within a field are consistent from year to year, so it is possible to apply the fungicide only at locations where CRR is manifest, thus minimizing the amount of fungicide applied across the field. Previous studies have shown that remote sensing (RS) from manned aircraft is an effective means of delineating CRR-infested field areas. Applying various classification methods to moderate-resolution (1.0 m/pixel) RS images has recently become the conventional way to delineate CRR-infested areas. In this research, an unmanned aerial vehicle (UAV) was used to collect high-resolution remote sensing (RS) images in three Texas fields known to be infested with CRR. Supervised, unsupervised, and combined unsupervised classification methods were evaluated for differentiating CRR from healthy zones of cotton plants. Two new automated classification methods that take advantage of the high resolution inherent in UAV RS images were also evaluated. The results indicated that the new automated methods were up to 8.89% better than conventional classification methods in overall accuracy. One of these new methods, an automated method combining k-means segmentation and morphological opening and closing, provided the best results, with overall accuracy of 88.5% and the lowest errors of omission (11.44%) and commission (16.13%) of all methods considered.
1 February 2022 in Computers and Electronics in Agriculture
Cotton root rot (CRR), caused by the fungus Phymatotrichopsis omnivora, is a destructive cotton disease that mainly affects the crop in Texas. Flutriafol fungicide applied at or soon after planting has been proven effective at protecting cotton plants from being infected by CRR. Previous research has indicated that CRR will reoccur in the same regions of a field as in past years. CRR-infected plants can be detected with aerial remote sensing (RS). As unmanned aerial vehicles (UAVs) have been introduced into agricultural RS, the spatial resolution of farm images has increased significantly, making plant-by-plant (PBP) CRR classification possible. An unsupervised classification algorithm, PBP, based on the Superpixel concept, was developed to delineate CRR-infested areas at roughly the single-plant level. Five-band multispectral data were collected with a UAV to test these methods. The results indicated that the single-plant level classification achieved overall accuracy as high as 95.94%. Compared to regional classifications, PBP classification performed better in overall accuracy, kappa coefficient, errors of commission, and errors of omission. The single-plant fungicide application was also effective in preventing CRR.
Accurate and reliable calibration methods are required when applying unmanned aerial vehicle (UAV)-based thermal remote sensing in precision agriculture for crop stress monitoring, irrigation planning, and harvesting. The primary objective of this study was to improve the calibration accuracies of UAV-based thermal images using temperature-controlled ground references. Two temperature-controlled ground references were installed in the field to serve as high- and low-temperature references, approximately spanning the expected range of crop surface temperatures during the growing season. Our results showed that the proposed method using temperature-controlled references was able to reduce errors due to ambient conditions from 9.29 to 1.68 °C, when tested with validation panels. There was a significant improvement in crop temperature estimation from the thermal image mosaic, as the error reduced from 14.0 °C in the un-calibrated image to 1.01 °C in the calibrated image. Furthermore, a multiple linear regression model (R2 = 0.78; p-value < 0.001; relative RMSE = 2.42%) was established to quantify soil moisture content based on canopy surface temperature and soil type, using UAV-based thermal image data and soil electrical conductivity (ECa) data as the predictor variables.
Unmanned aerial vehicle-based remote sensing technology has recently been widely applied to crop monitoring due to the rapid development of unmanned aerial vehicles, and these technologies have considerable potential in smart agriculture applications. Field phenotyping using remote sensing is mostly performed using unmanned aerial vehicles equipped with RGB cameras or multispectral cameras. For accurate field phenotyping for precision agriculture, images taken from multiple perspectives need to be simultaneously collected, and phenotypic measurement errors may occur due to the movement of the drone and plants during flight. In this study, to minimize measurement error and improve the digital surface model, we proposed a collaborative driving system that allows multiple UAVs to simultaneously acquire images from different viewpoints. An integrated navigation system based on MAVSDK is configured for the attitude control and position control of unmanned aerial vehicles. Based on the leader–follower-based swarm driving algorithm and a long-range wireless network system, the follower drone cooperates with the leader drone to maintain a constant speed, direction, and image overlap ratio, and to maintain a rank to improve their phenotyping. A collision avoidance algorithm was developed because different UAVs can collide due to external disturbance (wind) when driving in groups while maintaining a rank. To verify and optimize the flight algorithm developed in this study in a virtual environment, a GAZEBO-based simulation environment was established. Based on the algorithm that has been verified and optimized in the previous simulation environment, some unmanned aerial vehicles were flown in the same flight path in a real field, and the simulation and the real field were compared. As a result of the comparative experiment, the simulated flight accuracy (RMSE) was 0.36 m and the actual field flight accuracy was 0.46 m, showing flight accuracy like that of a commercial program.
Lactic acid (LA) plays a crucial role in the silage process, which occurs through LA fermentation. Consequently, there is a strong correlation between lactic acid production and the efficiency of the silage. However, traditional methods face challenges like long fermentation times, low acid production, and unstable quality, limiting agricultural preservation. This paper aims to explore innovations in lactic acid production technologies and show how these technologies have driven the development of silage fermentation for agricultural conservation. First, the important role of LA in agricultural preservation and the limitations of traditional silage techniques are presented. Next, advancements in LA production methods are thoroughly examined, covering the selection of microbial strains and the substitution of fermentation substrates. Following this, new technologies for silage fermentation are explored, drawing from innovations in LA production. These include the selection of LA strains, optimization of fermentation conditions, and improvements in fermentation techniques. These innovations have proven effective in increasing LA production, improving feed quality, extending shelf life, and providing new solutions to enhance agricultural production and sustainability.
About Me
Professor of Agricultural Machinery, China Agricultural University
Professor of Agricultural Machinery, China Agricultural University