We report on the numerical simulations and experimental validation of a microwave planar sensor based on two coupled rings operating in the 4–6 GHz range. The fabricated sensor is used to characterize the dielectric permittivity of vegetable oils. We optimized the geometrical parameters in order to improve the overlap between the oil samples under study and the electric field. The experimental results showed an excellent match with the simulation results. The fabricated sensor allowed to retrieve the oil permittivity with a sensitivity of about 35 MHz per permittivity unit in the frequency range of interest. This paves the way to the realization of compact and sensitive sensors for a wide plethora of fields ranging from industry and food to chemistry and biology.

Silicon-based Micro Ring Resonators (MRR) are a powerful tool for the realization of label free optical biosensors. The sharp edge of a Fano resonance in a Silicon Nitride (Si₃N₄) platform can boost photonic sensing applications based on MRRs. In this work, we demonstrate enhanced Fano resonance features for a Si₃N₄ Micro Ring Resonator assisted by a Photonic Crystal Nanobeam (PhCN-MRR) operating in the TM-like mode at the O-band wavelengths. Our findings show that the fabricated PhCN-MRR results in increased asymmetric resonances for TM-like mode compared with TE-like mode operation in the C-band. As a result, a versatile and flexible design to realize Fano resonance with polarization dependent asymmetry in the C and O telecom bands is presented.

Graphene is a material with exceptional optical, electrical and physicochemical properties that can be combined with dielectric waveguides. To date, several optical devices based on graphene have been modeled and fabricated operating in the near-infrared range and showing excellent performance and broad application prospects. This paper covers the main aspects of the optical behaviour of graphene and its exploitation as electrodes in several device configurations. The work compares the reported optical devices focusing on the wavelength tuning, showing how it can vary from a few hundred up to a few thousand picometers in the wavelength range of interest. This work could help and lead the design of tunable optical devices with integrated graphene layers that operate in the NIR.

Laser‐based mid‐infrared (mid‐IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enabling for qualitative reconstruction of broadband absorption features, typical of liquid or solid samples. In this work, we use an external cavity quantum cascade laser (EC‐QCL) that emits in pulsed mode in the region between 5.7 and 6.4 µm (1770–1560 cm ⁻¹ ), to measure the absorption spectrum of a thin film of polymethyl methacrylate (PMMA) spin‐coated on top of a silicon nitride (Si ₃ N ₄ ) micro‐ring resonator (MRR). Being the PTS signal inversely proportional to the volume of interaction, in the classical probe–pump dual beam detection scheme, we exploit a Si ₃ N ₄ transducer coated with PMMA, as a proof‐of‐principle for an on‐chip photothermal sensor. By tuning the probe laser at the inflection point of one resonance, aiming for highest sensitivity, we align the mid‐IR beam on top of the ring’s area, in a transversal configuration. To maximize the amplitude of the photoinduced thermal change, we focus the mid‐IR light on top of the ring using a Cassegrain reflector enabling for an optimal match between ring size and beam waist of the excitation source. We briefly describe the transducer design and fabrication process, present the experimental setup, and perform an analysis for optimal operational parameters. We comment on the obtained results showing that PTS allows for miniaturized robust sensors opening the path for on‐line/in‐line monitoring in several industrial processes.

This work demonstrates an ultra-compact optical gas-sensing system, consisting of a pigtailed laser diode emitting at 1392.5 nm for water vapor (H₂O) detection, a silicon nitride (Si₃N₄) optical waveguide to guide the laser light, and a custom-designed, low-frequency, and T-shaped Quartz Tuning Fork (QTF) as the sensitive element. The system employs both Quartz-Enhanced Photoacoustic Spectroscopy (QEPAS) and Light-Induced Thermoelastic Spectroscopy (LITES) techniques for trace gas sensing. A 3.8 mm-wide, S-shaped waveguide path was designed to prevent scattered laser light from directly illuminating the QTF. Both QEPAS and LITES demonstrated comparably low signal-to-noise ratios (SNRs), ranging from 1.6 to 3.2 for a 1.6% indoor H₂O concentration, primarily owing to the reduced optical power (~300 μW) delivered to the QTF excitation point. These results demonstrate the feasibility of integrating photonic devices and piezoelectric components into portable gas-sensing systems for challenging environments.