Waldemar Ścierski

Dr. Waldemar Ścierski

Department of Technologies and Installations for Waste Management, Silesian University of Technology

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 August 2025 in Energies
Verified
Journal Article
Open access
PDF file
MAMamo Abawalo
Mamo Abawalo
Krzysztof PikońKrzysztof Pikoń
Krzysztof Pikoń
MLMarcin Landrat
Marcin Landrat
WŚWaldemar Ścierski
Waldemar Ścierski
The escalating climate crisis and unsustainable waste management practices necessitate integrated approaches that simultaneously address energy security and environmental degradation. Hydrogen, with its high energy density and zero-carbon combustion, is a key vector for decarbonization; however, conventional production methods are fossil-dependent and carbon-intensive. This systematic review explores biowaste-to-hydrogen (WtH) technologies as dual-purpose solutions, converting organic waste to clean hydrogen while reducing greenhouse gas emissions and landfill reliance. A comprehensive analysis of different conversion pathways, including thermochemical (gasification, pyrolysis, hydrothermal, and partial oxidation (POX)), biochemical (dark fermentation, photofermentation, and sequential fermentation), and electrochemical methods (MECs), is presented, assessing their hydrogen yields, feedstock compatibilities, environmental impacts, and technological readiness. Systematic literature review methods were employed using databases, such as Scopus and Web of Science, with strict inclusion criteria focused on recent peer-reviewed studies. This review highlights hydrothermal gasification and dark fermentation as particularly promising for wet biowaste streams, like food waste. Comparative environmental analyses reveal that bio-based hydrogen pathways offer significantly lower greenhouse gas emissions, energy use, and pollutant outputs than conventional methods. Future research directions emphasize process integration, catalyst development, and lifecycle assessment. The findings aim to inform technology selection, policymaking, and strategic investment in circular, low-carbon hydrogen production.

3 April 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Marcin GórskiMarcin Górski
Marcin Górski
NWNatalia Wielgus
Natalia Wielgus
KLKrzysztof Loska
Krzysztof Loska
MKMichał Kozioł
Michał Kozioł
MLMarcin Landrat
Marcin Landrat
Krzysztof PikońKrzysztof Pikoń
Krzysztof Pikoń
Geopolymers can be treated as an environmentally friendly alternative for concrete and enables utilization of various wastes. This paper focuses on the possibility of application of discarded cathode ray tube (CRT) glass inside a metakaolin-based geopolymer in the form of an aggregate, providing an ecological method of recycling of this hazardous material. The main goal of this paper was to develop an optimal composition of a new geopolymer and to describe its behavior under varying curing conditions. A geopolymer made of different mixtures was subjected to flexural and compressive strength tests. The density, mass loss, temperature changes, and metals leaching were determined as well. The results demonstrated that neither the content of CRT glass nor the curing regime has a significant influence on the mechanical behavior. However, the strength of the geopolymer containing 50% CRT glass by mass increased with time in contrast to a geopolymer with a higher CRT glass content. The development of temperature inside the mixture was dependent on the amount of metakaolin. The concentration of toxic metals in an aqueous extract decreased considerably after the encapsulation of CRT glass inside the geopolymer. The presented results indicate that discarded CRT glass can be considered an aggregate for a metakaolin-based geopolymer. The new material shows high strength and makes the CRT glass safe for the environment.

21 January 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KKKatarzyna Klejnowska
Katarzyna Klejnowska
Krzysztof PikońKrzysztof Pikoń
Krzysztof Pikoń
WŚWaldemar Ścierski
Waldemar Ścierski
KSKrzysztof Skutil
Krzysztof Skutil
Magdalena BogackaMagdalena Bogacka
Magdalena Bogacka
Waste pharmaceutical blisters (WPBs) are a type of multimaterial waste that contain layers of plastic and metal connected permanently. The separation of those materials with the application of mechanical methods is impossible. One of the methods that can be used to recover metal from WPBs is pyrolysis—a thermal decomposition process performed in the absence of oxygen. The products are a solid fraction that contain char and metal, liquid fraction, and gases. The gases produced during the process can be used as a fuel, either alone or mixed with another gaseous fuel such as natural gas. The presented research was focused on the determination of the influence of the process temperature on the composition of gases produced during the pyrolysis of two types of pharmaceutical blister waste: pre- and postconsumer. The postconsumer waste contains trace amounts of pharmaceutical products. One of the goals was to determine whether those compounds influence the gas properties. The method of neutralizing these materials can be part of the circular economy, the idea of which is to strive to maximize the use of natural resources and bring them back into circulation. The presented method allows not only to recover char, oil, and metal that can be easily separated from the solid fraction, but also to reuse the process gases as a fuel and, possibly, to form HCl during the decomposition of PVC. The paper includes the analysis of the input material, as well as a detailed chemical analysis of the produced gases.

12 May 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WŚWaldemar Ścierski
Waldemar Ścierski
The most advantageous way of managing plastics, according to circular economy assumptions, is recycling, i.e., reusing them. There are three types of plastics recycling: mechanical, chemical and energy recycling. The products of the pyrolysis process can be used for both chemical and energy recycling. Possibilities of further use of pyrolysis products depend on their physicochemical parameters. Getting to know these parameters was the aim of the research, some of which are presented in this article. The paper presents the research position for conducting the pyrolysis process and discusses the results of research on pyrolysis products of waste plastics. The process was conducted to obtain the temperature of 425 °C in the pyrolytic chamber. Such a value was chosen on the basis of my own previous research and literature analysis. The focus was on the migration of sulfur and nitrogen, as in some processes these substances may pose a certain problem. Studies have shown high possibilities of migration of these elements in products of pyrolysis process. It has been shown that the migration of sulfur is similar in the case of homogeneous and mixed waste plastics—it immobilizes mainly in pyrolytic oil. Different results were obtained for nitrogen. For homogeneous plastics, nitrogen immobilizes mainly in char and oil, whereas for mixed plastics, nitrogen immobilizes in pyrolytic gas.

23 March 2021 in Energies
Verified
Journal Article
Open access
PDF file
Krzysztof PikońKrzysztof Pikoń
Krzysztof Pikoń
WŚWaldemar Ścierski
Waldemar Ścierski
KKKatarzyna Klejnowska
Katarzyna Klejnowska
ŁMŁukasz Myćka
Łukasz Myćka
ACAnna Czech
Anna Czech
ASAleksander Sinek
Aleksander Sinek
The research presented in this manuscript is focused on the pyrolysis of waste pharmaceutical blisters, which are a large and neglected group of waste, that could be possibly recovered. The studies were focused on the analysis of the chemical composition, as well as fuel properties of the char generated during the process and its possible applications. The process temperatures (400, 425, and 450 °C) were determined based on the thermogravimetric study that was performed prior to the pyrolysis tests. The selected materials included the pre- and post-consumer waste pharmaceutical blisters in order to determine the possible influence of impurities on the final products. The tests were performed on a laboratory scale fixed bed reactor. The obtained solid fractions (metal and char) were separated. Char was subjected to elemental analysis (C, H, N, Cl, S), as well as the heat of combustion and fuel-related properties (content of flammable, non-flammable, and volatile components) were determined. The results were used to compare the properties of char to the properties of active carbon. The market potential was analyzed.

27 March 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
MKMałgorzata Kajda-Szcześniak
Małgorzata Kajda-Szcześniak
Anna MainkaAnna Mainka
Anna Mainka
WŚWaldemar Ścierski
Waldemar Ścierski
MPMiroslawa Pawlyta
Miroslawa Pawlyta
DŁDariusz Łukowiec
Dariusz Łukowiec
AJAnna Jabłońska
Anna Jabłońska
Extended producer responsibility (EPR) and the circular economy can address the growing challenge of managing wood-based waste in the context of sustainability. This research explores pyrolysis as an effective method for converting wood-based waste, i.e., bamboo flooring (BF) and high-density fiberboard floor panels (HDF), into valuable products, particularly char. Char samples were activated through two distinct methods: (1) thermal activation at 700 and 850 °C and (2) chemical activation with KOH. Analytical techniques, including elemental and heavy metals analysis, FTIR, Raman spectroscopy, SEM, and TEM were used to assess the chemical composition and surface characteristics of the produced chars. Elemental analysis showed a notable rise in the amount of carbon to 81% and 75% in BF and HDF, respectively. The nitrogen content was relatively high in HDF at 5.12%. Heavy metals analysis revealed total metal contents ranging from 3632 to 9494 ppm in BF chars and 1717 to 7426 ppm in HDF chars. Raman spectra exhibited characteristic D and G bands, with ID/IG ratios of 0.83 for BF and 0.85 for HDF after activation. SEM and TEM analyses revealed heterogeneous porous structures with dominant carbon elements. The high carbon content, low toxicity, and advantageous elemental composition of the chars make them suitable for environmental applications.