The demand for heating in cold regions drives up carbon emissions every year. In order to achieve China’s carbon neutrality target by 2060, CO₂ emissions in the cold regions must be reduced. In this paper, using Design Builder software, a simulation model of residential buildings in severe cold regions was created, and the most appropriate parameter design scheme for carbon emission reduction of residential buildings in severe cold regions was derived by simulating the experimental data of the original parameter design scheme and the changed parameter design scheme, as well as the calculation of carbon dioxide emission reduction rate. In order to make the comparison of the results easier, no change was made in the selection of the changed scheme for the external insulation material, foamed polystyrene panels. The results show that the most suitable parameter scheme for houses in severe cold regions is 85 mm thick foamed polystyrene panels for exterior walls, 200 mm thick foamed polystyrene panels for roofs, and exterior windows should use semi-tempered plastic steel frame and triple glass 6 mm glass + vacuum + 6 mm low-e glass + 12 mm air + 6 mm glass composed of windows. This technique saves 30.32% of energy as compared to the original parameter design approach. The efficiency of energy conservation is 33.03%. The emission reduction effect is significant. The best parametric design plan has a static payback period of 5 years. The best parametric design plan has a discounted payback period of 7 and a net present value of USD 65,413.39. This scheme can provide a great economic return while also increasing the performance of the building.

Since the construction industry is one of China’s high carbon emission industries, to achieve China’s carbon neutrality target by 2060, CO₂ emissions in cold regions must be reduced. At the same time, forests have excellent carbon sequestration abilities, so this paper takes residential buildings in severely cold regions as the object of carbon emission reduction research. A model of a two-story building in Changchun was constructed, and the life-cycle carbon emissions of reinforced concrete and wood structures were measured using the life-cycle evaluation method as the basis for calculation and simulation with DesignBuilderVer.7 software. The results show that the life-cycle carbon emission of a wood structure house is 61.46 t less than that of a reinforced concrete house, and the life-cycle carbon emission reduction rate of a wood structure house is 43.39%. Based on the data, it has been proven that wooden structures effectively reduce carbon dioxide emissions during the building life cycle while enhancing building performance, given the same structural conditions.