As of 2024, approximately 81.5% of global energy consumption is still derived from non-renewable fossil fuels, such as coal, oil, and natural gas. This highlights the urgent need to transition to alternative energy sources amid the escalating climate crisis. Cyanobacteria and microalgae have emerged as promising biocatalysts in microbial fuel cells (MFCs) for eco-friendly energy production, owing to their photosynthetic abilities and resilience in regard to various environmental conditions. This review explores the potential of cyanobacteria and microalgae to drive bioelectricity generation via metabolic and extracellular electron transfer processes, leveraging their ability to fix carbon and nitrogen, while thriving in challenging environments. Bioengineering and electrode design advances are integrated to enhance the electron transfer efficacy and constancy of cyanobacteria-based MFCs. This approach addresses the growing demand for carbon-neutral energy and can be applied to wastewater treatment and bioremediation scenarios. By synergizing biological innovation with sustainable engineering techniques, this review establishes cyanobacteria and microalgal-driven MFCs as a scalable and eco-friendly platform for next-generation energy systems. The findings lay the groundwork for further exploration of the role of cyanobacteria and microalgae in bridging the gap between renewable energy production and environmental stewardship.
11 March 2025 in The International Journal of Advanced Manufacturing Technology
In this study, polycaprolactone (PCL)- and poly(acrylic acid) (PAA)-based electrospun nanofibers were prepared for the carriers of antimicrobials and designed composite nanofiber mats for chronic wound care. The PCL- and PAA-based electrospun nanofibers were prepared through in situ polymerization starting from PCL and acrylic acid (AA). Different amounts of AA were introduced to improve the hydrophilicity of the PCL electrospun nanofibers. A compatibilizer and a photoinitiator were then added to the electrospinning solution to form a grafted structure composed of PCL and PAA (PCL-g-PAA). The grafted PAA was mainly located on the surface of a PCL nanofiber. The optimization of the composition of PCL, AA, compatibilizer, and photoinitiator was studied, and the PCL-g-PAA electrospun nanofibers were characterized through scanning electron microscopy and 1H-NMR spectroscopy. Results showed that the addition of AA to PCL improved the hydrophilicity of the electrospun PCL nanofibers, and a PCL/AA ratio of 80/20 presented the best composition and had smooth nanofiber morphology. Moreover, poly[2 -(tert-butylaminoethyl) methacrylate]-grafted graphene oxide nanosheets (GO-g-PTA) functioned as an antimicrobial agent and was used as filler for PCL-g-PAA nanofibers in the preparation of composite nanofiber mats, which exerted synergistic effects promoted by the antibacterial properties of GO-g-PTA and the hydrophilicity of PCL-g-PAA electrospun nanofibers. Thus, the composite nanofiber mats had antibacterial properties and absorbed body fluids in the wound healing process, thereby promoting cell proliferation. The biodegradation of the PCL-g-PAA electrospun nanofibers also demonstrated an encouraging result of three-fold weight reduction compared to the neat PCL nanofiber. Our findings may serve as guidelines for the fabrication of electrospun nanofiber composites that can be used mats for chronic wound care.
The coaxial core/shell composite electrospun nanofibers consisting of relaxor ferroelectric P(VDF-TrFE-CTFE) and ferroelectric P(VDF-TrFE) polymers are successfully tailored towards superior structural, mechanical, and electrical properties over the individual polymers. The core/shell-TrFE/CTFE membrane discloses a more prominent mechanical anisotropy between the revolving direction (RD) and cross direction (CD) associated with a higher tensile modulus of 26.9 MPa and good strength-ductility balance, beneficial from a better degree of nanofiber alignment, the increased density, and C-F bonding. The interfacial coupling between the terpolymer P(VDF-TrFE-CTFE) and copolymer P(VDF-TrFE) is responsible for comparable full-frequency dielectric responses between the core/shell-TrFE/CTFE and pristine terpolymer. Moreover, an impressive piezoelectric coefficient up to 50.5 pm/V is achieved in the core/shell-TrFE/CTFE composite structure. Our findings corroborate the promising approach of coaxial electrospinning in efficiently tuning mechanical and electrical performances of the electrospun core/shell composite nanofiber membranes-based electroactive polymers (EAPs) actuators as artificial muscle implants.
Achieving high energy density while maintaining high power density and long cycle life in supercapacitors, particularly in supercapatteries (SCs), through a thermally stable, greener ionic liquid approach remains a significant challenge for an advanced energy storage application. In this work, we prepared high conductive and high charge storage capability bimetallic transition metal molybdate [Ag2Mo2O7 (AgM)], synergistic with reduced graphene oxide (rGO) coated on nickel foam (AgM/rGO/NF). The physio-chemical characterization revealed a ball-like cluster morphology wrapped in rGO nanosheets and a spinel-type cubic structure using scanning electron microscopy (FE-SEM) displays and X-ray diffraction (XRD) analyses. Further, the electrochemical performance of AgM/rGO/NF electrode achieved a remarkable specific Csp value of 573.63 F/g at a current density of 1.0 A/g in 3 M KOH electrolyte. An asymmetric SCs (ASCs) device was fabricated using AgM/rGO/NF as the positive and rGO as the negative electrodes, achieving a wide potential window of 1.3 V. The ASC demonstrated an energy density of 16.71 Wh/kg at a power density of 642.98 W/kg, highlighting AgM/rGO/NF’s potential as an advanced electrode material for energy storage applications.