Yuxin Liu

Dr. Yuxin Liu


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
SLsenyi liu
senyi liu
Chunhua LiuChunhua Liu
Chunhua Liu
Hang ZhaoHang Zhao
Hang Zhao
YLYuxin Liu
Yuxin Liu
Zhiping DongZhiping Dong
Zhiping Dong
This article proposes a novel flux weakening scheme for five-phase PMSM with active harmonic currents injection. The conventional flux weakening control schemes applied in the five-phase PMSM do not consider the voltage limit drop in the fundamental subspace due to the harmonic current controller. Thus, the derivation between the reference current trajectory and actual current trajectory would cause the current distortion when applying deadbeat current controller (DBCC). This article analyses the precise voltage limit circles considering the voltage drop caused by the resistance and harmonic currents control at first. Then, a feed-forward flux weakening control algorithm is designed to optimize the current trajectory online. The gradient descent method is used to ensure the converge speed and stability of the optimized current trajectory. Thirdly, the peak value of phase currents would be clipped by the harmonic currents to prevent the inverter current limit, where a new non-linear harmonic current controller is designed to precisely control the harmonic currents. Finally, the DBCC and modified SVPWM technology are utilized to generate the duty cycle. The proposed improved flux weakening control strategy is successfully implemented in an interior five-phase PMSM, and the performance demonstrate the effectiveness of this strategy.

21 October 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
SLsenyi liu
senyi liu
Zaixin SongZaixin Song
Zaixin Song
YLYuxin Liu
Yuxin Liu
YCYong Chen
Yong Chen
Chunhua LiuChunhua Liu
Chunhua Liu
The performance of flux-weakening controllers in the multiphase permanent magnets (PM) machines depends on the accurate fundamental voltage limit derivation, and the minimal copper loss design in the flux-weakening operation region has not been well discussed. In this article, the accurate fundamental voltage limit with considering harmonic current suppression is derived at first. Then, two control concepts are addressed, and the corresponding flux-weakening control strategies are designed with the gradient descent method. In the first control strategy, both the fundamental and harmonic voltage vectors are feasible, resulting in the larger amplitude of the phase currents. The second control strategy obtains higher bus voltage utilization by an additional transition stage. At the same time, the harmonic currents cannot be further suppressed in the flux-weakening operation region. Third, the copper loss per electrical cycle is calculated, and a switching scheme is designed to obtain lower copper loss in the flux-weakening operation region. Finally, both strategies are successfully implemented in a dual three-phase PMSM. Moreover, the proposed switching scheme obtains minimal copper loss in the whole flux-weakening operation region.

15 May 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YLYuxin Liu
Yuxin Liu
Chunhua LiuChunhua Liu
Chunhua Liu
Wusen WangWusen Wang
Wusen Wang
SLsenyi liu
senyi liu
YCYong Chen
Yong Chen
Energy routers are indispensable in deploying energy Internet for electric vehicles (EVs), which flexibly handle the power flow regulation. Combined with the excellent characteristic of wireless power transfer technology for noncontact energy transmission, this article proposes a novel wired/wireless hybrid multiport energy router (HMER) for future EV energy Internet. First, multiple bidirectional power ports are provided to control the power flow among the grid, various dc power sources, and EVs. Moreover, with grid-tied and islanded operations, the proposed HMER enables dynamic wireless energy exchange for EVs on the move. When moving along the energy exchange lane, the EVs can receive power from the HMER and conduct energy feedback, relieving mileage anxiety while creating economic benefits. Furthermore, a mathematical model of the system is derived, and a control algorithm is introduced to perform decoupled power control for each transceiver. Finally, a SIC experimental prototype is constructed to verify the effectiveness of the proposed HMER system. Experimental results prove the transceivers can get bidirectional wireless energy interconnection on the energy exchange lane in both grid-tied mode and islanded mode, and each transceiver can realize independent power regulation.

21 July 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
SLsenyi liu
senyi liu
Zaixin SongZaixin Song
Zaixin Song
Zhiping DongZhiping Dong
Zhiping Dong
YLYuxin Liu
Yuxin Liu
Chunhua LiuChunhua Liu
Chunhua Liu
The series-end winding permanent magnet synchronous machine (SW-PMSM) drive system is a new drive topology where the phase windings are connected in series. The generic carrier-based pulsewidth modulation (CBPWM) solution of SW-PMSMs will further promote their applications and avoid the computationally complex space vector PWM in multiphase SW-PMSMs. However, the existing CBPWM solution is complex and designed for symmetrical machines. Moreover, the current approach’s lack of the overmodulation method limits its application in the traction system. This article proposes an improved generic CBPWM solution for SW-PMSMs, which utilizes the vector space decomposition concept to extend the application in both symmetrical and asymmetrical machines. First, we will introduce the concept of the virtual duty axis and divide the modulation process into two steps, where the leg voltage sequence is initialized with reference phase voltages. Then, the virtual duty cycle is utilized to ensure the feasibility of the leg voltage sequence. Furthermore, we will provide an adaptative overmodulation scheme to ensure the stable fundamental currents in the whole speed range and improve the bus voltage utilization. Finally, the experimental results in three machines verify that the proposed solution can obtain better performance with lower switching frequency and have overmodulation capability.

15 March 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YLYuxin Liu
Yuxin Liu
Chunhua LiuChunhua Liu
Chunhua Liu
XGXingran Gao
Xingran Gao
SLsenyi liu
senyi liu
Traditional multichannel wireless power transfer (WPT) systems suffer from the complex system structure and cross-interference among receivers. To solve such problems, this article presents the design and control methods of a decoupled multichannel WPT system based on multilevel inverters. A single-phase multilevel inverter is utilized to drive the transmitter circuit with a voltage waveform consisting of multiple components. Particularly, these components are independent in the frequency spectrum, and their amplitudes can be controlled independently. Moreover, primary compensation is used to offer multiple frequencies for the primary circuit. Additional damping filters are used in the secondary circuits to reduce the cross-interference between the receivers. In addition, the features of the system topology are analyzed, and an exact parameter design method is presented. Furthermore, combined with the neutral point voltage balance strategy, a simple vector-based control method is proposed to regulate the transmitted power in each power channel. As a result, the power can be transferred to loads through the designed power channels simultaneously without mutual interference. Finally, both simulation and experiment of a 1-kW experimental prototype with SIC-MOSFET are given to verify the feasibility of the proposed multichannel WPT system and the control strategy.

25 October 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YLYuxin Liu
Yuxin Liu
Chunhua LiuChunhua Liu
Chunhua Liu
Zhiping DongZhiping Dong
Zhiping Dong
SLsenyi liu
senyi liu
Wusen WangWusen Wang
Wusen Wang
Home energy management system (HEMS) dynamically regulates energy production and consumption to reduce energy usage costs and increase power efficiency. By combining wireless power transfer (WPT) technology with energy routers, this article proposes a new wireless energy router system for HEMS to realize omnidirectional cableless energy interconnection among various energy storage devices, such as portable electronics, electric vehicles, and energy storage stations. The proposed system contains an energy router and multiple transceivers. Each transceiver can be charged and discharged through two independent power channels with different operating frequencies. First, two orthogonal router coils with LCC compensations work at two operating frequencies, enabling omnidirectional power transmission with the transceiver coils. Accordingly, a dual-frequency constant-current compensation network is proposed for the transceiver circuits to offer constant coil current operation. Furthermore, a decoupled phase-shift control with a power flow tracking algorithm is introduced to achieve independent power control for each transceiver. Finally, a parameter design procedure is developed, where a SIC- mosfet prototype with three transceivers is used to verify the effectiveness of the proposed system. Experimental results prove that the transceivers can get energy interconnection from all directions, and the power flow can be regulated independently from the transceiver side.