Yvon Cordier

Prof. Yvon Cordier

Université Côte d'Azur, CNRS, CRHEA
orcid

Research Focus & Metrics

Academic Career Length

37Years (1990-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 September 2014 in Journal of Microelectromechanical Systems
Verified
Journal Article
Open access
MRMina Rais-Zadeh
Mina Rais-Zadeh
VGVikrant Gokhale
Vikrant Gokhale
AAAzadeh Ansari
Azadeh Ansari
MFMarc Faucher
Marc Faucher
DTDidier Théron
Didier Théron
LBLionel Buchaillot
Lionel Buchaillot
Gallium nitride (GaN) is a wide bandgap semiconductor material and is the most popular material after silicon in the semiconductor industry. The prime movers behind this trend are LEDs, microwave, and more recently, power electronics. New areas of research also include spintronics and nanoribbon transistors, which leverage some of the unique properties of GaN. GaN has electron mobility comparable with silicon, but with a bandgap that is three times larger, making it an excellent candidate for high-power applications and high-temperature operation. The ability to form thin-AlGaN/GaN heterostructures, which exhibit the 2-D electron gas phenomenon leads to high-electron mobility transistors, which exhibit high Johnson's figure of merit. Another interesting direction for GaN research, which is largely unexplored, is GaN-based micromechanical devices or GaN microelectromechanical systems (MEMS). To fully unlock the potential of GaN and realize new advanced all-GaN integrated circuits, it is essential to cointegrate passive devices (such as resonators and filters), sensors (such as temperature and gas sensors), and other more than Moore functional devices with GaN active electronics. Therefore, there is a growing interest in the use of GaN as a mechanical material. This paper reviews the electromechanical, thermal, acoustic, and piezoelectric properties of GaN, and describes the working principle of some of the reported high-performance GaN-based microelectromechanical components. It also provides an outlook for possible research directions in GaN MEMS.

1 October 2009 in Journal of Applied Physics
Verified
Journal Article
Closed access
Amador Pérez TomásAmador Pérez Tomás
Amador Pérez Tomás
MPM. Placidi
M. Placidi
NBN. Baron
N. Baron
SCS. Chenot
S. Chenot
YCYvon Cordier
Yvon Cordier
JMJ. Millán
J. Millán
The characteristics of different GaN transistor devices characterized at elevated temperatures for power applications are compared in this paper. High temperature characteristics of GaN metal-oxide-semiconductor field-effect transistors (MOSFETs) and GaN high electron mobility transistors (HEMTs) are reported. For MOSFETs, the transconductance current (gm) increases with temperature, while for HEMTs is reduced. Their specific on resistance (Ron) follows the same trend. Specific contact resistivity (ρc) to implanted Si N+ GaN also diminishes with T, whereas for AlGaN/GaN ρc remains practically constant. We bring a more physical insight into the temperature behavior of these GaN devices by means of physics-based modeling in Sec. VI of this paper. The MOSFET’s field-effect mobility increases with T due to interface trap Coulomb scattering. Analogously, the HEMT’s gm decrease with T is attributed to a significant reduction in the two-dimensional electron gas carrier mobility due to polar-optical-phonon scattering. Simplified analytical expressions are presented for carrier mobility versus temperature which can be included in simulation packages.

16 February 2015 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
PAPhilippe Altuntas
Philippe Altuntas
FLFrancois Lecourt
Francois Lecourt
ACAdrien Cutivet
Adrien Cutivet
NDNicolas Defrance
Nicolas Defrance
EOEtienne Okada
Etienne Okada
JJJean-Claude De Jaeger
Jean-Claude De Jaeger
This letter reports on the demonstration of microwave power performance at 40 GHz on AlGaN/GaN high-electron mobility transistor grown on silicon (111) substrate by molecular beam epitaxy. A maximum dc current density of 1.1 A· mm -1 and a peak extrinsic transconductance of 374 mS · mm -1 are obtained for 75-nm gate length device. At VDS = 25 V, continuous-wave output power density of 2.7 W · mm -1 is achieved at 40 GHz associated with 12.5% power-added efficiency and a linear power gain (G p) of 6.5 dB. The device exhibits an intrinsic current gain cutoff frequency FT of 116 GHz and a maximum oscillation frequency FMAX of 150 GHz. This performance demonstrates the capability of low cost microwave power devices up to Ka-band.

14 February 2013 in Physical Review B
Verified
Journal Article
Closed access
RMRiccardo Messina
Riccardo Messina
JHJean-Paul Hugonin
Jean-Paul Hugonin
JGJean-Jacques Greffet
Jean-Jacques Greffet
FMFrançois Marquier
François Marquier
YWYannick De Wilde
Yannick De Wilde
PBPhilippe Ben-Abdallah
Philippe Ben-Abdallah
It is known that the near-field spectrum of the local density of states of the electromagnetic field above a SiC-air interface displays an intense narrow peak due to the presence of a surface polariton. It has been recently shown that this surface wave can be strongly coupled with the sheet plasmon of graphene in graphene-SiC heterosystems. Here, we explore the interplay between these two phenomena and demonstrate that the spectrum of the electromagnetic local density of states in these systems presents two peaks whose positions depend dramatically both on the distance to the interface and on the chemical potential of graphene. This paves the way toward active control of the local density of states.

10 March 2021 in Electronics
Verified
Journal Article
Open access
PDF file
IAIdriss Abid
Idriss Abid
JMJash Mehta
Jash Mehta
YCYvon Cordier
Yvon Cordier
JDJoff Derluyn
Joff Derluyn
SDStefan Degroote
Stefan Degroote
Farid MedjdoubFarid Medjdoub
Farid Medjdoub
High power electronics using wide bandgap materials are maturing rapidly, and significant market growth is expected in a near future. Ultra wide bandgap materials, which have an even larger bandgap than GaN (3.4 eV), represent an attractive choice of materials to further push the performance limits of power devices. In this work, we report on the fabrication of AlN/AlGaN/AlN high-electron mobility transistors (HEMTs) using 50% Al-content on the AlGaN channel, which has a much wider bandgap than the commonly used GaN channel. The structure was grown by metalorganic chemical vapor deposition (MOCVD) on AlN/sapphire templates. A buffer breakdown field as high as 5.5 MV/cm was reported for short contact distances. Furthermore, transistors have been successfully fabricated on this heterostructure, with low leakage current and low on-resistance. A remarkable three-terminal breakdown voltage above 4 kV with an off-state leakage current below 1 μA/mm was achieved. A regrown ohmic contact was used to reduce the source/drain ohmic contact resistance, yielding a drain current density of about 0.1 A/mm.

2 May 2013 in Journal of Applied Physics
Verified
Journal Article
Closed access
Amador Pérez TomásAmador Pérez Tomás
Amador Pérez Tomás
AFA. Fontserè
A. Fontserè
JLJordi Llobet
Jordi Llobet
MPM. Placidi
M. Placidi
SRS. Rennesson
S. Rennesson
YCYvon Cordier
Yvon Cordier
The vertical bulk (drain-bulk) current (Idb) properties of analogous AlGaN/GaN hetero-structures molecular beam epitaxially grown on silicon, sapphire, and free-standing GaN (FS-GaN) have been evaluated in this paper. The experimental Idb (25–300 °C) have been well reproduced with physical models based on a combination of Poole-Frenkel (trap assisted) and hopping (resistive) conduction mechanisms. The thermal activation energies (Ea), the (soft or destructive) vertical breakdown voltage (VB), and the effect of inverting the drain-bulk polarity have also been comparatively investigated. GaN-on-FS-GaN appears to adhere to the resistive mechanism (Ea = 0.35 eV at T = 25–300 °C; VB = 840 V), GaN-on-sapphire follows the trap assisted mechanism (Ea = 2.5 eV at T > 265 °C; VB > 1100 V), and the GaN-on-Si is well reproduced with a combination of the two mechanisms (Ea = 0.35 eV at T > 150 °C; VB = 420 V). Finally, the relationship between the vertical bulk current and the lateral AlGaN/GaN transistor leakage current is explored.