2-μm micro-disks containing InGaN/GaN quantum wells supported on a tiny Si nanotip are fabricated via microsphere lithography followed by dry and wet etch processes. The micro-disks are studied by photoluminescence at both room-temperature and 10 K. Optically pumped blue lasing at room-temperature is observed via whispering-gallery modes (WGMs) with a lasing threshold as low as 8.43 mJ/cm2. Optical resonances in the micro-disks are studied through numerical computations and finite-difference time-domain simulations. The WGMs are further confirmed through the measured broadband transmission spectrum, whose transmission minima coincide well with predicted WGM frequencies.
Optically pumped multi-mode whispering-gallery mode (WGM) lasing has been observed in optically free-standing InGaN/GaN quantum well microdisks at room temperature. The optically isolated microdisks are patterned by microsphere lithography on GaN thin-films prepared by laser lift-off of the sapphire substrate, enabling superior optical confinement. The modes are determined to be of second order according to simulations. The lasing threshold is found to be , with a quality factor of evaluated from the dominant mode at , and a free space range (FSR) of 3.17 to 2.16 nm, which is mode-dependent.
Circular airy vortex beams (CAVBs) have attracted much attention due to their “abruptly autofocusing” effect, phase singularity, and their potential applications in optical micromanipulation, communication, etc. In this paper, we numerically investigated the propagation properties of circular airy beams (CABs) imposed with different optical vortices (OVs) along the optical axis of a uniaxial crystal for the first time. Like other common beams, a left-hand circular polarized (LHCP) CAVB, propagating along the optical axis in a uniaxial crystal, can excite a right-hand circular polarized (RHCP) component superimposed with an on-axis vortex of topological charge (TC) number of 2. When the incident beam is an LHCP CAB imposed with an on-axis vortex of TC number of l = 1, both of the two components have an axisymmetric intensity distribution during propagation and form hollow beams near the focal plane because of the phase singularity. The phase pattern shows that the LHCP component carries an on-axis vortex of TC number of l = 1, while the RHCP component carries an on-axis vortex of TC number of l = 3. With a larger TC number (l = 3), the RHCP component has a larger hollow region in the focal plane compared to the LHCP component. We also studied cases of CABs imposed with one and two off-axis OVs. The off-axis OV makes the CAVB’s profile remain asymmetric throughout the propagation. As the propagation distance increases, the off-axis OVs move near the center of the beam and overlap, resulting in a special intensity and phase distribution near the focal plane.
Free-form optical elements face significant challenges in high-precision measurement due to their high complexity and non-rotational symmetry. Digital holographic microscopy (DHM), as one of the methods for the measurement of free-form optical elements, has promising applications due to its ultra-high precision and non-destructive and fast characteristics. Therefore, we have designed a novel measurement method that combines transmission DHM and reflection DHM to obtain thickness information and surface information of elements to deduce the 3D structure. With this method, we completed the measurement of a free-form optical element. The DHM system we built has recorded holograms under 4× and 20× objectives and successfully recovered the 3D surface shape of the element. The measurements are consistent with the designed and manufactured parameters, demonstrating the unique advantages of DHM for measuring special types of optical elements.
We investigate the propagation properties of circular Airy beams (CABs) with propagational fractional-order optical vortices (OVs). The superposition of the phase singularity and polarization singularity from a vortex vector beam (VVB) plays a significant role in creating a propagational fractional vortex beam. Propagational fractional vortex beams can be considered as a superposition of left and right circularly polarized vortex beams with different integer topological charges (TCs). We study the propagation characteristics of two kinds of propagational fractional vortex CABs, and the results show that both of the two kinds of beams can stably propagate in free space, and they exhibit an “abruptly auto-focusing” property and “self-healing” property during the propagation. The intensity distribution of the first kind of propagational fractional vortex CAB has an odd number of petals (2m + 1), while the second kind of beam has a crescent-shaped intensity distribution. The influence of turbulence on the beam propagation through atmosphere under different turbulence strengths is also numerically studied in this paper. A fractional vortex CAB with an initial radius r0 = 10 mm can retain its shape after propagating 20 m when the atmospheric refractive-index structure constant . Our results are expected to broaden the application of CABs.