This paper deals with a residential hybrid thermal/ electrical grid-connected home energy system, including a fuel-cell with combined heat and power (CHP) and a battery as energy storage system (ESS). A day-ahead scheduling algorithm for managing different resources is developed to generate an efficient look-up table that determines an optimal operation schedule for the distributed energy resources at each time interval, so that the operation cost of a smart house is minimized. The impact of the electricity tariff and the efficiency of the energy storage system are considered when optimizing the operation schedules.
11 January 2017 in IEEE Transactions on Industrial Informatics
Online optimal control of a multicarrier home energy system, including a fuel cell (FC) with combined heat and power functionality, a furnace, and a battery as an energy storage system, is presented in this paper. An appropriately defined objective function (OF) is formulated to address the operation costs of the home energy system by considering the electrical time-of-use price and time-varying electrical and thermal demand. To determine the optimal control strategy of the FC, the defined OF is solved analytically to reach a closed-form solution for the optimal operation of the FC, which results in the global optimum compared with the near-optimal point in previous works of FC scheduling. To attain the whole system optimal operation, a rule-based solution for the optimal operation of the battery is proposed according to its characteristics. The proposed method is applied to a realistic case study including real load demand and experimentally verified data of the FC. The results are compared with previous approaches, in which optimization techniques have been used to achieve near-optimal scheduling of FC with/without a battery. It is shown that the proposed control strategy results in more exact scheduling and can be applied successfully in real applications.
In this work, we present a novel technique to locate partial discharge (PD) sources based on the concept of time reversal. The localization of the PD sources is of interest for numerous applications, including the monitoring of power transformers, Gas Insulated Substations, electric motors, super capacitors, or any other device or system that can suffer from PDs. To the best of the authors’ knowledge, this is the first time that the concept of time reversal is applied to localize PD sources. Partial discharges emit both electromagnetic and acoustic waves. The proposed method can be used to localize PD sources using either electromagnetic or acoustic waves. As a proof of concept, we present only the results for the electromagnetic case. The proposed method consists of three general steps: (1) recording of the waves from the PD source(s) via proper sensor(s), (2) the time-reversal and back-propagation of the recorded signal(s) into the medium using numerical simulations, and (3) the localization of focal spots. We demonstrate that, unlike the conventional techniques based on the time difference of arrival, the proposed time reversal method can accurately localize PD sources using only one sensor. As a result, the proposed method is much more cost effective compared to existing techniques. The performance of the proposed method is tested considering practical scenarios in which none of the former developed methods can provide reasonable results. Moreover, the proposed method has the unique advantage of being able to locate multiple simultaneous PD sources and doing so with a single sensor. The efficiency of the method against the variation in the polarization of the PDs, their length, and against environmental noise is also investigated. Finally, the validity of the proposed procedure is tested against experimental observations.