In this work, crash precipitation technique was employed to synthesize a visible light-responsive tungsten trioxide (WO₃) photocatalyst using ammonium paratungstate as tungsten precursor. The spray-dried (120 °C) and calcined (600 °C) WO₃ powder was characterized by analyzing methods of XRD, PSD, BET and BJH, Raman, FESEM/EDX, FTIR, UV–vis DRS and XPS spectroscopy. X-ray diffraction (XRD) and Raman studies confirm the well crystalline monoclinic crystal structure. Scanning electron microscopy (SEM) images showed micron-sized spherical bulks of WO₃ particles with needle-like morphology. A normal distribution with a d₅₀ (median diameter) value of 6.0 μm was observed with particle size analysis. Much enhanced BET surface area of 102 g/m² with wide pore size 1.8 nm is measured compared to commercially available WO₃ that results in increased pollutants surface adsorption. Fourier transform infrared spectroscopy (FTIR) study demonstrated that the calcined sample surface is enriched with bonded hydroxyl groups, beneficial for powder particles activity. Photocatalyst band gap was calculated by considering the absorbance measurements recorded on UV–vis diffuse reflectance spectroscopy (DRS). The energy value of 2.6 eV was calculated which lies in the visible light region while X-ray photoelectron spectroscopy (XPS) analysis showed 6 + oxidation state for tungsten. Bulk WO₃ sphere photocatalytic activity was evaluated through the exertion of synthetic textile methylene blue (MB) dye and sulfamethoxazole (SMX) pharmaceutical antibiotic. The obtained activity results showed 85% and 100% degradation for MB and SMX under 100 min visible light irradiation. We expect that our work may provide a new sample for energy production (H₂) through water photolysis, gas sensing and soft matter research.

Water pollution is an increasing global issue that societies are facing and is threating human health, ecosystem functions and agriculture production. The distinguished features of artificial intelligence (AI) based modeling can deliver a deep insight pertaining to rising water quality concerns. The current study investigates the predictive performance of gene expression programming (GEP), artificial neural network (ANN) and linear regression model (LRM) for modeling monthly total dissolved solids (TDS) and specific conductivity (EC) in the upper Indus River at two outlet stations. In total, 30 years of historical water quality data, comprising 360 TDS and EC monthly records, were used for models training and testing. Based on a significant correlation, the TDS and EC modeling were correlated with seven input parameters. Results were evaluated using various performance measure indicators, error assessment and external criteria. The simulated outcome of the models indicated a strong association with actual data where the correlation coefficient above 0.9 was observed for both TDS and EC. Both the GEP and ANN models remained the reliable techniques in predicting TDS and EC. The formulated GEP mathematical equations depict its novelty as compared to ANN and LRM. The results of sensitivity analysis indicated the increasing trend of input variables affecting TDS as HCO₃⁻ (22.33%) > Cl⁻ (21.66%) > Mg²⁺ (16.98%) > Na⁺ (14.55%) > Ca²⁺ (12.92%) > SO₄²⁻ (11.55%) > pH (0%), while, in the case of EC, it followed the trend as HCO₃⁻ (42.36%) > SO₄²⁻(25.63%) > Ca²⁺ (13.59%) > Cl⁻ (12.8%) > Na⁺ (5.01%) > pH (0.61%) > Mg²⁺ (0%). The parametric analysis revealed that models have incorporated the effect of all the input parameters in the modeling process. The external assessment criteria confirmed the generalized outcome and robustness of the proposed approaches. Conclusively, the outcomes of this study demonstrated that the formulation of AI based models are cost effective and helpful for river water quality assessment, management and policy making.

The prediction accuracies of machine learning (ML) models may not only be dependent on the input parameters and training dataset, but also on whether an ensemble or individual learning model is selected. The present study is based on the comparison of individual supervised ML models, such as gene expression programming (GEP) and artificial neural network (ANN), with that of an ensemble learning model, i.e., random forest (RF), for predicting river water salinity in terms of electrical conductivity (EC) and dissolved solids (TDS) in the Upper Indus River basin, Pakistan. The projected models were trained and tested by using a dataset of seven input parameters chosen on the basis of significant correlation. Optimization of the ensemble RF model was achieved by producing 20 sub-models in order to choose the accurate one. The goodness-of-fit of the models was assessed through well-known statistical indicators, such as the coefficient of determination (R²), mean absolute error (MAE), root mean squared error (RMSE), and Nash–Sutcliffe efficiency (NSE). The results demonstrated a strong association between inputs and modeling outputs, where R² value was found to be 0.96, 0.98, and 0.92 for the GEP, RF, and ANN models, respectively. The comparative performance of the proposed methods showed the relative superiority of the RF compared to GEP and ANN. Among the 20 RF sub-models, the most accurate model yielded the R² equal to 0.941 and 0.938, with 70 and 160 numbers of corresponding estimators. The lowest RMSE values of 1.37 and 3.1 were yielded by the ensemble RF model on training and testing data, respectively. The results of the sensitivity analysis demonstrated that HCO₃⁻ is the most effective variable followed by Cl⁻ and SO₄²⁻ for both the EC and TDS. The assessment of the models on external criteria ensured the generalized results of all the aforementioned techniques. Conclusively, the outcome of the present research indicated that the RF model with selected key parameters could be prioritized for water quality assessment and management.

One of the most valuable approaches in spatial analysis for a better understanding of the hydrological response of a region or a watershed is certainly the analysis of the well-known land use land cover (LULC) dynamicity. The present case study delves deeper into the analysis of LULC dynamicity by using digital Landsat TM and Landsat OLI data to classify the Kolkata Metropolitan Development Authority (KMDA) into seven classes with over 90% classification accuracy for decadal level assessments of 30 years (for the years 1989, 1999, 2009, and 2019). The change index, the Dematel method for analyzing the cause-effect relationship among the LULC classes, the Jaccard Similarity Index for measuring the nature of similarity among the LULC classes, and the Adherence Index for measuring the consistency of the LULC classes after the transition was used in this study to analyze the LULC transformation. In more detail, the present study considers how urban land use is altering at the expense of other land uses. Besides the shifting pattern of mean centers of the LULC classes through time, also gives a very significant insight into the LULC dynamics over 30 years of span. The current study of LULC dynamicity and transformation patterns over the 30 years of the KMDA area is expected to assist land and urban planners, engineers, and administrators in sustainable decisions and policies to ensure inclusive urbanization that accommodates population growth while minimizing the impact on potential natural resources within the whole study area.

Modeling surface water quality using soft computing techniques is essential for the effective management of scarce water resources and environmental protection. The development of accurate predictive models with significant input parameters and inconsistent datasets is still a challenge. Therefore, further research is needed to improve the performance of the predictive models. This study presents a methodology for dataset pre-processing and input optimization for reducing the modeling complexity. The objective of this study was achieved by employing a two-sided detection approach for outlier removal and an exhaustive search method for selecting essential modeling inputs. Thereafter, the adaptive neuro-fuzzy inference system (ANFIS) was applied for modeling electrical conductivity (EC) and total dissolved solids (TDS) in the upper Indus River. A larger dataset of a 30-year historical period, measured monthly, was utilized in the modeling process. The prediction capacity of the developed models was estimated by statistical assessment indicators. Moreover, the 10-fold cross-validation method was carried out to address the modeling overfitting issue. The results of the input optimization indicate that Ca²⁺, Na⁺, and Cl⁻ are the most relevant inputs to be used for EC. Meanwhile, Mg²⁺, HCO₃⁻, and SO₄²⁻ were selected to model TDS levels. The optimum ANFIS models for the EC and TDS data showed R values of 0.91 and 0.92, and the root mean squared error (RMSE) results of 30.6 µS/cm and 16.7 ppm, respectively. The optimum ANFIS structure comprises a hybrid training algorithm with 27 fuzzy rules of triangular fuzzy membership functions for EC and a Gaussian curve for TDS modeling, respectively. Evidently, the outcome of the present study reveals that the ANFIS modeling, aided with data pre-processing and input optimization, is a suitable technique for simulating the quality of surface water. It could be an effective approach in minimizing modeling complexity and elaborating proper management and mitigation measures.

Water contamination is indeed a worldwide problem that threatens public health, environmental protection, and agricultural productivity. The distinctive attributes of machine learning (ML)-based modelling can provide in-depth understanding into increasing water quality challenges. This study presents the development of a multi-expression programming (MEP) based predictive model for water quality parameters, i.e., electrical conductivity (EC) and total dissolved solids (TDS) in the upper Indus River at two different outlet locations using 360 readings collected on a monthly basis. The optimized MEP models were assessed using different statistical measurements i.e., coefficient-of-determination (R²), root-mean-square error (RMSE), mean-absolute error (MAE), root-mean-square-logarithmic error (RMSLE) and mean-absolute-percent error (MAPE). The results show that the R² in the testing phase (subjected to unseen data) for EC-MEP and TDS-MEP models is above 0.90, i.e., 0.9674 and 0.9725, respectively, reflecting the higher accuracy and generalized performance. Also, the error measures are quite lower. In accordance with MAPE statistics, both the MEP models shows an “excellent” performance in all three stages. In comparison with traditional non-linear regression models (NLRMs), the developed machine learning models have good generalization capabilities. The sensitivity analysis of the developed MEP models with regard to the significance of each input on the forecasted water quality parameters suggests that Cl and HCO₃ have substantial impacts on the predictions of MEP models (EC and TDS), with a sensitiveness index above 0.90, although the influence of the Na is the less prominent. The results of this research suggest that the development of intelligence models for EC and TDS are cost effective and viable for the evaluation and monitoring of the quality of river water.