Plastic consumption increases with the growing population worldwide and results in increased quantities of plastic waste. There are various plastic waste management strategies; however, the present management progress is not sustainable, and plastic waste dumping in landfills is still the most commonly employed strategy. Being nonbiodegradable, plastic waste dumping in landfills creates several environmental and human health problems. Numerous research studies have been conducted recently to determine safe and ecologically beneficial methods of plastic waste handling. This article performed a bibliographic analysis of the available literature on plastic waste management using a computational approach. The highly used keywords, most frequently cited papers and authors, actively participating countries, and sources of publications were analyzed during the bibliographic analysis. In addition, the various plastic waste management strategies and their environmental benefits have been discussed. It has been concluded that among the six plastic waste management techniques (landfills, recycling, pyrolysis, liquefaction, road construction and tar, and concrete production), road construction and tar and concrete production are the two most effective strategies. This is due to significant benefits, such as ease of localization, decreased greenhouse gas emissions, and increased durability and sustainability of manufactured materials, structures, and roadways. Conversely, using landfills is the most undesirable strategy because of the associated environmental and human health concerns. Recycling has equal benefits and drawbacks. In comparison, pyrolysis and liquefaction are favorable due to the production of char and fuel, but high energy requirements limit their benefits. Hence, the use of plastic waste for construction applications is recommended.

This study aimed to expand the knowledge on the application of the most common industrial byproduct, i.e., fly ash, as a supplementary cementitious material. The characteristics of cement-based composites containing fly ash as supplementary cementitious material were discussed. This research evaluated the mechanical, durability, and microstructural properties of FA-based concrete. Additionally, the various factors affecting the aforementioned properties are discussed, as well as the limitations associated with the use of FA in concrete. The addition of fly ash as supplementary cementitious material has a favorable impact on the material characteristics along with the environmental benefits; however, there is an optimum level of its inclusion (up to 20%) beyond which FA has a deleterious influence on the composite’s performance. The evaluation of the literature identified potential solutions to the constraints and directed future research toward the application of FA in higher amounts. The delayed early strength development is one of the key downsides of FA use in cementitious composites. This can be overcome by chemical activation (alkali/sulphate) and the addition of nanomaterials, allowing for high-volume use of FA. By utilizing FA as an SCM, sustainable development may promote by lowering CO₂ emissions, conserving natural resources, managing waste effectively, reducing environmental pollution, and low hydration heat.

Increased population necessitates an expansion of infrastructure and urbanization, resulting in growth in the construction industry. A rise in population also results in an increased plastic waste, globally. Recycling plastic waste is a global concern. Utilization of plastic waste in concrete can be an optimal solution from recycling perspective in construction industry. As environmental issues continue to grow, the development of predictive machine learning models is critical. Thus, this study aims to create modelling tools for estimating the compressive and tensile strengths of plastic concrete. For predicting the strength of concrete produced with plastic waste, this research integrates machine learning algorithms (individual and ensemble techniques), including bagging and adaptive boosting by including weak learners. For predicting the mechanical properties, 80 cylinders for compressive strength and 80 cylinders for split tensile strength were casted and tested with varying percentages of irradiated plastic waste, either as of cement or fine aggregate replacement. In addition, a thorough and reliable database, including 320 compressive strength tests and 320 split tensile strength tests, was generated from existing literature. Individual, bagging and adaptive boosting models of decision tree, multilayer perceptron neural network, and support vector machines were developed and compared with modified learner model of random forest. The results implied that individual model response was enriched by utilizing bagging and boosting learners. A random forest with a modified learner algorithm provided the robust performance of the models with coefficient correlation of 0.932 for compressive strength and 0.86 for split tensile strength with the least errors. Sensitivity analyses showed that tensile strength models were least sensitive to water and coarse aggregates, while cement, silica fume, coarse aggregate, and age have a substantial effect on compressive strength models. To minimize overfitting errors and corroborate the generalized modelling result, a cross-validation K-Fold technique was used. Machine learning algorithms are used to predict mechanical properties of plastic concrete to promote sustainability in construction industry.

Compressive and flexural strength are the crucial properties of a material. The strength of recycled aggregate concrete (RAC) is comparatively lower than that of natural aggregate concrete. Several factors, including the recycled aggregate replacement ratio, parent concrete strength, water–cement ratio, water absorption, density of the recycled aggregate, etc., affect the RAC’s strength. Several studies have been performed to study the impact of these factors individually. However, it is challenging to examine their combined impact on the strength of RAC through experimental investigations. Experimental studies involve casting, curing, and testing samples, for which substantial effort, price, and time are needed. For rapid and cost-effective research, it is critical to apply new methods to the stated purpose. In this research, the compressive and flexural strengths of RAC were predicted using ensemble machine learning methods, including gradient boosting and random forest. Twelve input factors were used in the dataset, and their influence on the strength of RAC was analyzed. The models were validated and compared using correlation coefficients (R²), variance between predicted and experimental results, statistical tests, and k-fold analysis. The random forest approach outperformed gradient boosting in anticipating the strength of RAC, with an R² of 0.91 and 0.86 for compressive and flexural strength, respectively. The models’ decreased error values, such as mean absolute error (MAE) and root-mean-square error (RMSE), confirmed the higher precision of the random forest models. The MAE values for the random forest models were 4.19 MPa and 0.56 MPa, whereas the MAE values for the gradient boosting models were 4.78 MPa and 0.64 MPa, for compressive and flexural strengths, respectively. Machine learning technologies will benefit the construction sector by facilitating the evaluation of material properties in a quick and cost-effective manner.

The depletion of natural resources and greenhouse gas emissions related to the manufacture and use of ordinary Portland cement (OPC) pose serious concerns to the environment and human life. The present research focuses on using alternative binders to replace OPC. Geopolymer might be the best option because it requires waste materials enriched in aluminosilicate for its production. The research on geopolymer concrete (GPC) is growing rapidly. However, substantial effort and expenses are required to cast specimens, cures, and tests. Applying novel techniques for the said purpose is the key requirement for rapid and cost-effective research. In this research, supervised machine learning (SML) techniques, including two individual (decision tree (DT) and gene expression programming (GEP)) and two ensembled (bagging regressor (BR) and random forest (RF)) algorithms were employed to estimate the compressive strength (CS) of GPC. The validity and comparison of all the models were made using the coefficient of determination (R²), k-fold, and statistical assessments. It was noticed that the ensembled SML techniques performed better than the individual SML techniques in forecasting the CS of GPC. However, individual SML model results were also in the reasonable range. The R² value for BR, RF, GEP, and DT models was 0.96, 0.95, 0.93, and 0.88, respectively. The models’ lower error values such as mean absolute error (MAE) and root mean square errors (RMSE) also verified the higher precision of ensemble SML methods. The RF (MAE = 2.585 MPa, RMSE = 3.702 MPa) and BR (MAE = 2.044 MPa, RMSE = 3.180) results are better than the DT (MAE = 4.136 MPa, RMSE = 6.256 MPa) and GEP (MAE = 3.102 MPa, RMSE = 4.049 MPa). The application of SML techniques will benefit the construction sector with fast and cost-effective methods for estimating the properties of materials.

Amid the COVID-19 pandemic, a sudden surge in the production and utilization of disposable, single-use facial masks has been observed. Delinquency in proper disposal of used facial masks endangers the environment with a new form of non-biodegradable plastic waste that will take hundreds of years to break down. Therefore, there is an urgent need for the resourceful recycling of such waste in an environmentally friendly way. This study presents an efficient solution by using waste masks in fibered or crushed form to produce environmentally friendly and affordable green concrete. This investigation assessed the mechanical and durability properties of waste masks-incorporated concrete. A total of six mixes were prepared for standardized tests to determine compressive strength, split cylinder tensile strength and rapid chloride penetration test (RCPT), and freeze-thaw resistance. The percentage of mask fibers used were 0.5, 1, 1.5, and 2% of concrete by volume, while crushed masks were used at 0.5% only. The mask waste in both forms was found suitable to be used in concrete. One percent of waste mask fibers was found as an optimum value to increase compressive and tensile strength, reduce chloride permeability, and increase freeze-thaw resistance. Besides this, 0.5% crushed mask fiber also performed well, especially for producing less permeable and highly durable concrete. It is thus corroborated that waste masks that increase pollution worldwide can be utilized sustainably to help build green buildings. By reutilizing waste masks to produce improved concrete with better strengths and higher durability, circular economy and sustainability are achieved, along with efficient waste management.