The aim of this study was to investigate the influence of biomass micronization on energy production using a converted aircraft turbine AI-20. The test system was constructed in such a way to ensure continuous operation for a given period of time and was equipped in a chopper, a flail mill, and a micronizer. The turbine had the ability to produce energy from solid biomass and as well conventional fuels. The most energy was obtained from absolutely dry sunflower husk (17.27 MJ/kg) and the least from Poplar (7.82 MJ/kg). Miscanthus, wheat straw, and hay (approximately 17 MJ/kg) showed high values of energy production. In addition, the thermal decomposition of wheat straw at 350 and 450 °C was studied using the Py-GC/MS technique in a helium atmosphere to determine the gaseous compounds formed during biomass gasification under anaerobic conditions. The results obtained indicate the formation of compounds classified as phenols (vanillin, hydroxymethylfurfural).

The purpose of this work is to determine the impact of selected silage maize cultivation technologies, including energy inputs in the production chain (cultivation, harvesting, heap placing), on energy efficiency. The analysis of energy inputs, energy efficiency for the silage maize production technology were estimated. The research was performed for 13 farms producing silage maize. The data from the farms covered all the activities and the agrotechnical measures performed. The calculations of energy inputs made for the silage maize production for selected technologies were performed using the method developed by the Institute of Construction, Mechanization and Electrification for Agriculture (IBMER), once the method was verified and adapted to the needs and conditions of own research. Based on the accumulated energy production and the energy accumulated in the yield, energy efficiency index values for 13 silage maize cultivation technologies were calculated. The greatest impact on the results of energy efficiency calculations was shared by fertilizer and fuel inputs. In conclusion, it can be stated that, in terms of energy efficiency, maize cultivation is justified and it can generate energy benefits.

The briquetting process is one of methods of solid biofuel production. During the briquetting of raw material, it can be noticed that material is viscoelastic, and reflects the effect on the volume and the final effect of the agglomerate during mentioned treatment. The research aimed to evaluate the mechanical and energetic properties of shredded pine forest residues during the briquetting process. The shredded fragments of the forest residues were compacted by the principal stresses with determination of the energy value consumed during the briquetting process. Tests were carried out using a specially designed compacting tube, with additional equipment directly mounted on the testing machine. The compaction process was carried out using the presented material and through continuous monitoring of the process parameters. During the study, it was estimated that the moisture content of the compacted material should be equal from 10 to 15%. The calculated average value of the unit energy consumption during the briquetting process (WB) was equal to 0.14 MJ·kg⁻¹. In future research, the mathematical model can serve as an algorithm in a computer program in order to calculate the flow of biomass in the extrusion process.

This article aims to provide a comprehensive review of the use of logging residues in manufacturing briquettes, and to demonstrate their potential as a renewable energy source. Technical aspects of briquetting are examined, including wood properties, particle size, moisture content, and process temperature. Forest residues, such as branches and treetops, have a high energy potential with calorific values reaching up to 20 MJ∙kg⁻¹ after briquetting. Densifying these residues increases their energy density (achieving up to 1120 kg∙m⁻³) and reduces waste and greenhouse gas emissions. Briquetting processes were analyzed economically and environmentally, with studies showing that production costs can be reduced by 25% when using locally sourced residues. This review recommends optimizing production processes to improve briquette durability and quality. Future research directions focused on developing cost-effective briquetting technologies tailored for small- and medium-sized businesses are identified in the study. Rural and economically disadvantaged regions could benefit from these advancements in briquetting. This paper advocates improved collaboration with international organizations to standardize briquette quality, promoting market acceptance and trade. Technology such as briquetting has the potential to advance renewable energy systems and achieve global climate goals.

A digital elevation model (DEM) is an essential element of input data in the model research of watersheds. Recently, progress in measurement techniques has led to the availability of such data with high spatial resolution. Therefore, simplification of DEMs to shorten the time of their processing is a significant, but insufficiently investigated issue. This study, gradually and with various methods, carried out a great simplification of a detailed LiDAR-derived DEM. Then, the impact of that treatment on the precision of the selected elements for modeling a watershed was assessed. The simplification comprised a reduction in resolution, with the use of statistical resampling methods, namely giving an average, modal, median, minimum, maximum, or the closest value to the pixels. This process was carried out in a wide range of pixel sizes, increasing by 50% each time (from 1 m to 1.5, 2.3, 3.4, 5.1, 7.6, 11, 17, 26, 38, 58, and 86 m, respectively). The precision of the obtained DEMs and the precision of the delineation of boundaries of the watershed and watercourses were assessed. With the systematic reduction in the resolution of a DEM, its precision systematically decreased. The changes in the precision of determining the watercourses and boundaries of a watershed were irregular, ranging from being very small, to mild, to significant. A method of giving the minimum value, that was simple with regard to computing, was singled out. In the determination of both the watercourses and the boundaries of a watershed, this method produced one of the best results for the higher resolution and for the lower resolution—considerably better than the other methods tested. The research was conducted on a flat agricultural catchment, and it can be assumed that the obtained conclusions can be considered for similar cases. For catchments with different characteristics, further research is advisable.

The aim of this study was the investigation of the effect of growth conditions of energy willow (Salix viminalis L.) on its physical and chemical parameters towards lignocellulosic biofuels. This work is linked to the global trend of replacing fossil fuels (coal, oil, natural gas) with energy and renewable fuels. This energy transition is dictated by the reduction of the human-induced greenhouse effect (to the greatest extent by industrial development). Changing from traditional to renewable energy sources results in industry becoming less dependent on fuels whose sources are beginning to run out, and in energy processing being broken down into smaller sectors with greater flexibility to change and less susceptibility to failure. The use of lignocellulosic raw materials such as wood, straw, food industry waste, wood, and post-consumer products such as old furniture for energy purposes allows the use of substances which bind the greenhouse gas carbon dioxide in their cellular structure during growth. In order to optimise the costs of producing such energy and minimise its impact on the environment, these plants should be located as close as possible to the source of raw materials. One of the most important characteristics for the profitability of energy production from woody biomass is a high biomass yield. For this purpose, the raw material used for this study was energy willow (Salix viminalis L.) seedlings, which are often used for energy crops. Due to the moisture-loving nature of the substrate, the effect of the addition of the active substance prednisonum as a catalyst for water adsorption from the substrate was investigated. In order to determine the substances formed during the thermal decomposition of energy willow (Salix viminalis L.) wood, a pyrolysis process was carried out at 450 °C using pyrolysis gas chromatography mass spectrometry (PY/GC-MS).