The aim of this study was to investigate the influence of biomass micronization on energy production using a converted aircraft turbine AI-20. The test system was constructed in such a way to ensure continuous operation for a given period of time and was equipped in a chopper, a flail mill, and a micronizer. The turbine had the ability to produce energy from solid biomass and as well conventional fuels. The most energy was obtained from absolutely dry sunflower husk (17.27 MJ/kg) and the least from Poplar (7.82 MJ/kg). Miscanthus, wheat straw, and hay (approximately 17 MJ/kg) showed high values of energy production. In addition, the thermal decomposition of wheat straw at 350 and 450 °C was studied using the Py-GC/MS technique in a helium atmosphere to determine the gaseous compounds formed during biomass gasification under anaerobic conditions. The results obtained indicate the formation of compounds classified as phenols (vanillin, hydroxymethylfurfural).

The aim of this study was the investigation of the effect of growth conditions of energy willow (Salix viminalis L.) on its physical and chemical parameters towards lignocellulosic biofuels. This work is linked to the global trend of replacing fossil fuels (coal, oil, natural gas) with energy and renewable fuels. This energy transition is dictated by the reduction of the human-induced greenhouse effect (to the greatest extent by industrial development). Changing from traditional to renewable energy sources results in industry becoming less dependent on fuels whose sources are beginning to run out, and in energy processing being broken down into smaller sectors with greater flexibility to change and less susceptibility to failure. The use of lignocellulosic raw materials such as wood, straw, food industry waste, wood, and post-consumer products such as old furniture for energy purposes allows the use of substances which bind the greenhouse gas carbon dioxide in their cellular structure during growth. In order to optimise the costs of producing such energy and minimise its impact on the environment, these plants should be located as close as possible to the source of raw materials. One of the most important characteristics for the profitability of energy production from woody biomass is a high biomass yield. For this purpose, the raw material used for this study was energy willow (Salix viminalis L.) seedlings, which are often used for energy crops. Due to the moisture-loving nature of the substrate, the effect of the addition of the active substance prednisonum as a catalyst for water adsorption from the substrate was investigated. In order to determine the substances formed during the thermal decomposition of energy willow (Salix viminalis L.) wood, a pyrolysis process was carried out at 450 °C using pyrolysis gas chromatography mass spectrometry (PY/GC-MS).

The influence of bacterial cellulose gel film pretreatment methods on the efficiency of enzymatic hydrolysis was investigated. An increase in the efficiency of enzymatic hydrolysis due to liquid hot water pretreatment or steam explosion was shown. The glucose yield of 88% was obtained from raw, non-purified, bacterial cellulose treated at 130 °C. The results confirm the potential of bacterial cellulose gel film as a source for liquid biofuel production.

The aim of this study was to determine the changes occurring in the wood cellulose of the fast-growing poplar (Populus deltoides × maximowiczii) under the influence of steam explosion (SE) pretreatment. Cellulose from native wood and after pretreatment at 160 and 205 °C was isolated. Cellulose polymerization degree by size exclusion chromatography (SEC) and cellulose crystallinity index by Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) were determined. The profiles of sugars in the native wood and in the solid fraction after pretreatment (using the acid hydrolysis method) were also determined. In addition, the profile of monosaccharides in the liquid fraction obtained after steam explosion and in the liquid fraction after acid hydrolysis of the oligosaccharides were investigated using high-performance liquid chromatography (HPLC). This allowed to determine the change in the yield of hexoses and pentoses in the studied material.The behavior of cellulose in wood subjected to steam explosion at 160 and 205 °C and isolated by the Kürschner–Hoffer method was studied by determining the absorption bands of FTIR-ATR spectra. The lateral order index (LOI) of cellulose was calculated from the ratio of the intensity of the corresponding absorption bands A₁₄₂₂/A₈₉₆ cm⁻¹. Total crystallinity index (TCI) of cellulose was calculated from the ratio of the intensity of absorption bands A₁₃₇₂/A₂₉₀₀ cm⁻¹. TCI of Kürschner-Hoffer cellulose isolated from wood subjected to steam explosion at 160 and 205 °C decreased by 5.6 and 5.0%, respectively, with regard to the applied temperature. LOI increased in cellulose isolated from wood subjected to steam explosion at 160 °C (by 0.7%) and at 205 °C (by 19.2%) in relation to the index of cellulose isolated from native wood. Kürschner–Hoffer cellulose isolated from wood subjected to steam explosion at 160 and 205 °C exhibited, respectively, a reduced degree of polymerization of about 11% and about 8%. Polydispersity index in Kürschner–Hoffer cellulose was 1% lower after both pretreatments than native sample.

The aim of this study was to investigate the effect of storing methods of woodchips from two species, pine (Pinus sylvestris L.) and alder (Alnus Mill.), on the basic chemical composition and sugar yield in liquid biofuel production. Two methods of storing woody biomass were used in the study—an open pile and a cover pile. The wood was felled at the end of November and was stored as industrial chips for eight months from December onward. After this time, material was collected for chemical composition analyses and enzymatic hydrolysis. The results of the chemical composition analysis of the wood for both studied species showed the influence of the type of storage on the composition of the individual structural components of the wood. Based on the results of the enzymatic hydrolysis of the woody biomass, it can be seen that, irrespective of the hydrolysed material (wood, cellulose, holocellulose), the material from the biomass stored in the open pile gave higher results. The hydrolysis efficiency also increased with time, independent of the type of material that was hydrolysed. The highest sugar yield from the enzymatic hydrolysis of wood was obtained for alder wood stored in an open pile. The highest sugar yield from the enzymatic hydrolysis of cellulose was obtained for cellulose extracted from alder wood—as well—that had been stored in an open pile.