The aim of this study was to investigate the influence of biomass micronization on energy production using a converted aircraft turbine AI-20. The test system was constructed in such a way to ensure continuous operation for a given period of time and was equipped in a chopper, a flail mill, and a micronizer. The turbine had the ability to produce energy from solid biomass and as well conventional fuels. The most energy was obtained from absolutely dry sunflower husk (17.27 MJ/kg) and the least from Poplar (7.82 MJ/kg). Miscanthus, wheat straw, and hay (approximately 17 MJ/kg) showed high values of energy production. In addition, the thermal decomposition of wheat straw at 350 and 450 °C was studied using the Py-GC/MS technique in a helium atmosphere to determine the gaseous compounds formed during biomass gasification under anaerobic conditions. The results obtained indicate the formation of compounds classified as phenols (vanillin, hydroxymethylfurfural).

Industrial hemp (Cannabis sativa L.) is a plant species cultivated as a raw material for fiber extraction. Alternatively, hemp biomass can be used for feeding or energy purposes. This study was conducted to investigate the effect of inoculation with a lactic acid bacteria starter culture on the fermentation and chemical compositions of hemp silages. Hemp shoots (HS) and hemp flowers (HF) were ensiled in mini laboratory silos without or with the inoculation of the commercial starter culture Lactosil Biogaz (Lentilactobacillus buchnerii KKP 907 p; L. buchneri A KKP 2047 p; Pediococcus acidilactici KKP 2065 p). After 7 and 42 days of ensiling, the fermentation quality and chemical compositions of the silages were assessed. The use of Lactosil Biogas for hemp resulted in a decrease in pH, increase in lactic acid (LA), and reduction in fungal abundance in the HS silage. In the case of the HF silage, the bacterial inoculation was less effective; however, an increase in LA and a decrease in butyric acid (BA) were observed. As a result of the ensilage process, decreases in crude fiber and hemicellulose were observed in the HS and HF silages. Thus, hemp ensiling with biological additives is an effective pre-treatment of hemp plants for subsequent biofuel production that can preserve the biomass and provide the year-round availability of feedstock.

X-ray technology is capable of non-destructively testing solid wood samples. The prepared wood briquette samples were identified by X-ray technology. The studies assessed the effect of biomass briquette structure by observing wood chip fractions under an X-ray. Study results show that X-ray technology is an effective tool for analyzing biomass wood-based materials, e.g., density, improving wood products quality and performance. The measurements are consistent with the true density, and chemical properties were measured from chosen material. In the article, a coefficient representing the picture density and true density of briquettes was proposed, and the comparison of both densities was based on the empirical measurements. Probably through an application of the conversion factor, the process of determining material densities could be simplified, cheaper, and quicker. Due to the conducted research, X-ray technology is an effective tool for improving wood products’ quality and performance. Combining X-ray technology with laboratory test results can provide quick and easy analysis. For example, the density comparison of shredded forest residues was defined. Based on the results, the mean value of the conversion factor was about 0.6. In addition, the observed results were compared with the doctoral research. Higher durability was found in briquettes with lower fractions of f₁ (31–68%) compared to the higher f₂, f₃, and f₄ (6–37%), which was approved in the spectrum picture.

Marginal land is the area remaining in agricultural use, which is not suitable for food production because of its unfavorable ecological, anthropological, and economic conditions. A certain amount of such land exists in mountainous areas. An analysis was undertaken on the example of the Polish Sudeten mountain range of energy use. The study aimed to estimate the biomass potential for the efficient use of agricultural land in mountain areas. The characteristics of the Polish Sudeten Mountains mountain range were characterized using Geographic Information System (GIS) methods. The Polish Sudeten Mountains covers an area of 370,392 ha, 95,341 ha of which is arable land, 35,726 ha of which is class 5 bonitation land with a northern exposure of 19,030 ha and southern exposure of 16,696 ha. Depending on the sowing structure, we can obtain 331,639 tons/year of dry biomass (Miscanthus sacchariflorus on the southern and Helianthus tuberoses on northern exposure). Fertilization levels will significantly affect low yielding plants, and water stress significantly reduced yields in all cases. Due to the steep slope of the 5th-grade halves and intensive rainfall in the mountain region, the establishment of perennial plantations is recommended. The research shows that after the first year of cultivation, yields of 9.27 tons/ha of dry matter can be obtained with a low yield of trees, shrubs and perennials.

Models describe our beliefs about how the world functions. In mathematical modelling, we translate those beliefs into the language of mathematics. Mathematical models can yield prognose on the base of applied fertiliser dose. In this work results of finding yield mathematical model according to fertiliser (nitrogen) dose for perennials (willowleaf sunflower Helianthus salicifolious, cup plant Silphium perfoliatum and Jerusalem artichoke Helianthus tuberosus) on marginal land are presented. Models were described as normalised square equations for dependence between yield and fertiliser doses. Experiments were conducted in lisymeters and vases for willowleaf sunflower and cup plant. For Jerusalem artichoke experiments were done in vases only. All experiments have been doing during two years (2018 and 2019) for different fertilisers doses (45, 90 and 135 kg N∙ha–1) in three repetitions. From simulations maximal yield could be achieved for following fertiliser doses – willowleaf sunflower 104 kg N∙ha–1, cup plant 85 kg N∙ha–1 and Jerusalem artichoke 126 kg N∙ha–1.