A versatile method is reported for the manufacturing of antimicrobial (AM) surgery equipment utilising fused deposition modelling (FDM), three-dimensional (3D) printing and sonochemistry thin-film deposition technology. A surgical retractor was replicated from a commercial polylactic acid (PLA) thermoplastic filament, while a thin layer of silver (Ag) nanoparticles (NPs) was developed via a simple and scalable sonochemical deposition method. The PLA retractor covered with Ag NPs (PLA@Ag) exhibited vigorous AM properties examined by a reduction in Staphylococcus aureus (S. aureus), Pseudomonas aeruginosa (P. aeruginosa) and Escherichia coli (E. coli) bacteria viability (%) experiments at 30, 60 and 120 min duration of contact (p < 0.05). Scanning electron microscopy (SEM) showed the surface morphology of bare PLA and PLA@Ag retractor, revealing a homogeneous and full surface coverage of Ag NPs. X-Ray diffraction (XRD) analysis indicated the crystallinity of Ag nanocoating. Ultraviolent-visible (UV-vis) spectroscopy and transmission electron microscopy (TEM) highlighted the AgNP plasmonic optical responses and average particle size of 31.08 ± 6.68 nm. TEM images of the PLA@Ag crossection demonstrated the thickness of the deposited Ag nanolayer, as well as an observed tendency of AgNPs to penetrate though the outer surface of PLA. The combination of 3D printing and sonochemistry technology could open new avenues in the manufacturing of low-cost and on-demand antimicrobial surgery equipment.

Colorectal cancer (CRC) constitutes a major global health concern, ranking as the third most common cancer and the second leading cause of cancer-related mortality. The current review explores sex-based differences in CRC epidemiology, risk factors, tumor biology, and clinical outcomes. Males exhibit a higher incidence and mortality rate, with left-sided (distal) CRC predominating, while females are more frequently diagnosed with right-sided (proximal) tumors, which tend to be more aggressive and less responsive to conventional chemotherapy. Genetic disparities, including microsatellite instability and X-chromosome tumor suppressor genes, contribute to sex-specific differences in tumor progression and treatment response. Immune variations also influence disease outcomes, with females exhibiting stronger immune surveillance but higher exhaustion markers. Lifestyle factors such as body mass index (BMI), smoking, and hormonal influences further modulate CRC risk. While males are more vulnerable to obesity-related CRC, central obesity (waist-to-hip ratio) emerges as a stronger predictor in females. Additionally, smoking increases CRC risk differentially by tumor location. These findings underscore the importance of sex-specific approaches in CRC prevention, screening, and treatment, advocating for personalized medicine strategies tailored to gender-based biological and clinical distinctions.

3D printing provides the sequential addition of material layers and, thus, the opportunity to print parts and components made of different materials with variable mechanical and physical properties. It helps us create 3D anatomical models for the better planning of surgical procedures when needed, since it can reveal any complex anatomical feature. Images of abdominal aortic aneurysms received by computed tomographic angiography were converted into 3D images using a Google SketchUp free software and saved in stereolithography format. Using a 3D printer (Makerbot), a model made of polylactic acid material (thermoplastic filament) was printed. A 3D model of an abdominal aorta aneurysm was created in 138 min, while the model was a precise copy of the aorta visualized in the computed tomographic images. The total cost (including the initial cost of the printer) reached 1303.00 euros. 3D imaging and modelling using different materials can be very useful in cases when anatomical difficulties are recognized through the computed tomographic images and a tactile approach is demanded preoperatively. In this way, major complications during abdominal aorta aneurysm management can be predicted and prevented. Furthermore, the model can be used as a mould; the development of new, more biocompatible, less antigenic and individualized can become a challenge in the future.

A mesenteric chylous cyst is defined as a cyst occurring in the mesentery of the gastrointestinal tract anywhere from the duodenum to the rectum and is diagnosed most often during the fifth decade of life. In our case report, we describe a case of 38-year-old Greek woman who presented at our Emergency Department complaining of abdominal pain without any other symptoms. Her medical and family histories were clear and she had never had any abdominal interventions. During an imaging examination with ultrasound of her abdomen, an anechoic lesion in her upper left abdomen was revealed. In a further investigation with computed tomography, a well-defined hypodense cystic 7.08 × 6.05 cm mass with mild enhancement was noted. The mass was excised by open laparotomy within healthy borders and the specimen was sent for pathological examination. The histopathological findings were found to be most consistent with a simple lymphatic (chylous) cyst of the mesentery. A review of the literature considering this rare entity was also performed to evaluate our treatment strategy and the result was analyzed. Chylous cysts represent a diagnostic challenge and they should be considered when a physician encounters an intraabdominal mass. Physical examination and imaging do not always provide a diagnosis and surgical management should be advised due to the potential complications that may develop.

3D printing is a rapidly advancing technology which represents a significant technological achievement that could be useful in a variety of biomedical applications. In the field of surgery, 3D printing is envisioned as a significant step in the areas of surgical planning, education and training. The 3D printed models are considered as high quality and efficient educational tools. In this paper A randomized controlled trial was performed to compare the educational role of 3D printed models with that of the conventional MRI films in the training of surgical residents. Statistical analysis revealed that Resident surgeons who studied only the anal fistula printed models, (Group B) achieved a higher overall score in the fistula assessment test (87,2 (82,6-91,6)) compared to resident surgeons (Group A) who studied only MRI images (74,85 (66,8-73,5)). 3D printing technology can lead to improvement in preoperative planning accuracy, followed by efficient optimization of the treatment strategy. It is believed that 3D printing technology could be used in the case of various other surgical applications, thus representing a novel tool for surgical education.