Emergency personnel, such as firefighters, bomb technicians, and urban search and rescue specialists, can be exposed to a variety of extreme hazards during the response to natural and human-made disasters. In many of these scenarios, a risk factor is the presence of hazardous airborne chemicals. The recent and rapid advances in robotics and sensor technologies allow emergency responders to deal with such hazards from relatively safe distances. Mobile robots with gas-sensing capabilities allow to convey useful information such as the possible source positions of different chemicals in the emergency area. However, common gas sampling procedures for laboratory use are not applicable due to the complexity of the environment and the need for fast deployment and analysis. In addition, conventional gas identification approaches, based on supervised learning, cannot handle situations when the number and identities of the present chemicals are unknown. For the purpose of emergency response, all the information concluded from the gas detection events during the robot exploration should be delivered in real time. To address these challenges, we developed an online gas-sensing system using an electronic nose. Our system can automatically perform unsupervised learning and update the discrimination model as the robot is exploring a given environment. The online gas discrimination results are further integrated with geometrical information to derive a multi-compound gas spatial distribution map. The proposed system is deployed on a robot built to operate in harsh environments for supporting fire brigades, and is validated in several different real-world experiments of discriminating and mapping multiple chemical compounds in an indoor open environment. Our results show that the proposed system achieves high accuracy in gas discrimination in an online, unsupervised, and computationally efficient manner. The subsequently created gas distribution maps accurately indicate the presence of different chemicals in the environment, which is of practical significance for emergency response.

In this paper, we address the task of gas distribution modeling in scenarios where multiple heterogeneous compounds are present. Gas distribution modeling is particularly useful in emission monitoring applications where spatial representations of the gaseous patches can be used to identify emission hot spots. In realistic environments, the presence of multiple chemicals is expected and therefore, gas discrimination has to be incorporated in the modeling process. The approach presented in this work addresses the task of gas distribution modeling by combining different non selective gas sensors. Gas discrimination is addressed with an open sampling system, composed by an array of metal oxide sensors and a probabilistic algorithm tailored to uncontrolled environments. For each of the identified compounds, the mapping algorithm generates a calibrated gas distribution model using the classification uncertainty and the concentration readings acquired with a photo ionization detector. The meta parameters of the proposed modeling algorithm are automatically learned from the data. The approach was validated with a gas sensitive robot patrolling outdoor and indoor scenarios, where two different chemicals were released simultaneously. The experimental results show that the generated multi compound maps can be used to accurately predict the location of emitting gas sources.

The increased popularity of Behavior Trees (BTs) in different fields of robotics requires efficient methods for learning BTs from data instead of tediously handcrafting them. Recent research in learning from demonstration reported encouraging results that this letter extends, improves and generalizes to arbitrary planning domains. We propose BT-Factor as a new method for learning expert knowledge by representing it in a BT. Execution traces of previously manually designed plans are used to generate a BT employing a combination of decision tree learning and logic factorization techniques originating from circuit design. We test BT-Factor in an industrially-relevant simulation environment from a mining scenario and compare it against a state-of-the-art BT learning method. The results show that our method generates compact BTs easy to interpret, and capable to capture accurately the relations that are implicit in the training data.

In this work we present a novel multi-sensor unit, a.k.a. FireNose, to detect and discriminate both known and unknown gases in uncontrolled conditions to aid firefighters under harsh conditions. The unit includes three metal oxide (MOX) gas sensors with CMOS micro heaters, a plasmonic enhanced non-dispersive infrared (NDIR) sensor optimized for the detection of CO2, a commercial temperature humidity sensor, and a flow sensor. We developed custom film coatings for the MOX sensors (SnO2, WO3 and NiO) which greatly improved the gas sensitivity, response time and lifetime of the miniature devices. Our proposed system exhibits promising performance for gas sensing in harsh environments, in terms of power consumption (∼ 35 mW at 350°C per MOX sensor), response time (<10 s), robustness and physical size. The sensing unit was evaluated with plumes of gases in both, a laboratory setup on a gas testing rig and on-board a mobile robot operating indoors. These high sensitivity, high-bandwidth sensors, together with online unsupervised gas discrimination algorithms, are able to detect and generate their spatial distribution maps accordingly. In the robotic experiments, the resulting gas distribution maps corresponded well to the actual location of the sources. Therefore, we verified its ability to differentiate gases and generate gas maps in real-world experiments.

Air pollution causes millions of premature deaths every year, and fugitive emissions of, e.g., methane are major causes of global warming. Correspondingly, air pollution monitoring systems are urgently needed. Mobile, autonomous monitoring can provide adaptive and higher spatial resolution compared with traditional monitoring stations and allows fast deployment and operation in adverse environments. We present a mobile robot solution for autonomous gas detection and gas distribution mapping using remote gas sensing. Our “Autonomous Remote Methane Explorer” ($\mathrm{ARMEx}$ ) is equipped with an actuated spectroscopy-based remote gas sensor, which collects integral gas measurements along up to 30 m long optical beams. State-of-the-art 3D mapping and robot localization allow the precise location of the optical beams to be determined, which then facilitates gas tomography (tomographic reconstruction of local gas distributions from sets of integral gas measurements). To autonomously obtain informative sampling strategies for gas tomography, we reduce the search space for gas inspection missions by defining a sweep of the remote gas sensor over a selectable field of view as a sensing configuration. We describe two different ways to find sequences of sensing configurations that optimize the criteria for gas detection and gas distribution mapping while minimizing the number of measurements and distance traveled. We evaluated an $\mathrm{ARMEx}$ prototype deployed in a large, challenging indoor environment with eight gas sources. In comparison with human experts teleoperating the platform from a distant building, the autonomous strategy produced better gas maps with a lower number of sensing configurations and a slightly longer route.

Stack-of-Tasks (SoT) control allows a robot to simultaneously fulfill a number of prioritized goals formulated in terms of (in)equality constraints in error space. Since this approach solves a sequence of Quadratic Programs (QP) at each time-step, without taking into account any temporal state evolution, it is suitable for dealing with local disturbances. However, its limitation lies in the handling of situations that require non-quadratic objectives to achieve a specific goal, as well as situations where countering the control disturbance would require a locally suboptimal action. Recent works address this shortcoming by exploiting Finite State Machines (FSMs) to compose the tasks in such a way that the robot does not get stuck in local minima. Nevertheless, the intrinsic trade-off between reactivity and modularity that characterizes FSMs makes them impractical for defining reactive behaviors in dynamic environments. In this letter, we combine the SoT control strategy with Behavior Trees (BTs), a task switching structure that addresses some of the limitations of the FSMs in terms of reactivity, modularity and re-usability. Experimental results on a Franka Emika Panda 7-DOF manipulator show the robustness of our framework, that allows the robot to benefit from the reactivity of both SoT and BTs.