This work presents a simulation framework developed under the widely used Robot Operating System (ROS) to enable the validation of robotics systems and gas sensing algorithms under realistic environments. The framework is rooted in the principles of computational fluid dynamics and filament dispersion theory, modeling wind flow and gas dispersion in 3D real-world scenarios (i.e., accounting for walls, furniture, etc.). Moreover, it integrates the simulation of different environmental sensors, such as metal oxide gas sensors, photo ionization detectors, or anemometers. We illustrate the potential and applicability of the proposed tool by presenting a simulation case in a complex and realistic office-like environment where gas leaks of different chemicals occur simultaneously. Furthermore, we accomplish quantitative and qualitative validation by comparing our simulated results against real-world data recorded inside a wind tunnel where methane was released under different wind flow profiles. Based on these results, we conclude that our simulation framework can provide a good approximation to real world measurements when advective airflows are present in the environment.

Emergency personnel, such as firefighters, bomb technicians, and urban search and rescue specialists, can be exposed to a variety of extreme hazards during the response to natural and human-made disasters. In many of these scenarios, a risk factor is the presence of hazardous airborne chemicals. The recent and rapid advances in robotics and sensor technologies allow emergency responders to deal with such hazards from relatively safe distances. Mobile robots with gas-sensing capabilities allow to convey useful information such as the possible source positions of different chemicals in the emergency area. However, common gas sampling procedures for laboratory use are not applicable due to the complexity of the environment and the need for fast deployment and analysis. In addition, conventional gas identification approaches, based on supervised learning, cannot handle situations when the number and identities of the present chemicals are unknown. For the purpose of emergency response, all the information concluded from the gas detection events during the robot exploration should be delivered in real time. To address these challenges, we developed an online gas-sensing system using an electronic nose. Our system can automatically perform unsupervised learning and update the discrimination model as the robot is exploring a given environment. The online gas discrimination results are further integrated with geometrical information to derive a multi-compound gas spatial distribution map. The proposed system is deployed on a robot built to operate in harsh environments for supporting fire brigades, and is validated in several different real-world experiments of discriminating and mapping multiple chemical compounds in an indoor open environment. Our results show that the proposed system achieves high accuracy in gas discrimination in an online, unsupervised, and computationally efficient manner. The subsequently created gas distribution maps accurately indicate the presence of different chemicals in the environment, which is of practical significance for emergency response.

In this work we present a novel multi-sensor unit, a.k.a. FireNose, to detect and discriminate both known and unknown gases in uncontrolled conditions to aid firefighters under harsh conditions. The unit includes three metal oxide (MOX) gas sensors with CMOS micro heaters, a plasmonic enhanced non-dispersive infrared (NDIR) sensor optimized for the detection of CO2, a commercial temperature humidity sensor, and a flow sensor. We developed custom film coatings for the MOX sensors (SnO2, WO3 and NiO) which greatly improved the gas sensitivity, response time and lifetime of the miniature devices. Our proposed system exhibits promising performance for gas sensing in harsh environments, in terms of power consumption (∼ 35 mW at 350°C per MOX sensor), response time (<10 s), robustness and physical size. The sensing unit was evaluated with plumes of gases in both, a laboratory setup on a gas testing rig and on-board a mobile robot operating indoors. These high sensitivity, high-bandwidth sensors, together with online unsupervised gas discrimination algorithms, are able to detect and generate their spatial distribution maps accordingly. In the robotic experiments, the resulting gas distribution maps corresponded well to the actual location of the sources. Therefore, we verified its ability to differentiate gases and generate gas maps in real-world experiments.

Detecting chemical compounds using electronic noses is important in many gas sensing related applications. A gas detection system is supposed to indicate a significant event, such as the presence of new chemical compounds or a noteworthy change of concentration levels. Existing gas detection methods typically rely on prior knowledge of target analytes to prepare a dedicated, supervised learning model. However, in some scenarios, such as emergency response, not all the analytes of concern are a priori known and their presence are unlikely to be controlled. In this paper, we take a step towards addressing this issue by proposing an ensemble learning based approach (ELBA) that integrates several one-class classifiers and learns online. The proposed approach is initialized by training several one-class models using clean air only. During the sampling process, the initialized system detects the presence of chemicals, allowing to learn another one-class model and update existing models with self-labelled data. We validated the proposed approach with real-world experiments, in which a mobile robot equipped with an e-nose was remotely controlled to interact with different chemical analytes in an uncontrolled environment. We demonstrated that the ELBA algorithm not only can detect gas exposures but also recognize baseline responses under a suspect short-term sensor drift condition. Depending on the problem setups in practical applications, the present work can be easily hybridized to integrate other supervised learning models when the prior knowledge of target analytes is partially available.

Long-term human motion prediction (LHMP) is essential for safely operating autonomous robots and vehicles in populated environments. It is fundamental for various applications, including motion planning, tracking, human-robot interaction and safety monitoring. However, accurate prediction of human trajectories is challenging due to complex factors, including, for example, social norms and environmental conditions. The influence of such factors can be captured through Maps of Dynamics (MoDs), which encode spatial motion patterns learned from (possibly scattered and partial) past observations of motion in the environment and which can be used for data-efficient, interpretable motion prediction (MoD-LHMP). To address the limitations of prior work, especially regarding accuracy and sensitivity to anomalies in long-term prediction, we propose the Laminar Component Enhanced LHMP approach (LaCE-LHMP). Our approach is inspired by data-driven airflow modelling, which estimates laminar and turbulent flow components and uses predominantly the laminar components to make flow predictions. Based on the hypothesis that human trajectory patterns also manifest laminar flow (that represents predictable motion) and turbulent flow components (that reflect more unpredictable and arbitrary motion), LaCE-LHMP extracts the laminar patterns in human dynamics and uses them for human motion prediction. We demonstrate the superior prediction performance of LaCE-LHMP through benchmark comparisons with state-of-the-art LHMP methods, offering an unconventional perspective and a more intuitive understanding of human movement patterns.