Agnieszka Mirkowska

Dr. Agnieszka Mirkowska

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 April 2022 in IEEE Transactions on Dielectrics and Electrical Insulation
Verified
Journal Article
Closed access
AMAgnieszka Mirkowska
Agnieszka Mirkowska
RKRyszard Kacprzyk
Ryszard Kacprzyk
KRKacper Rozmaryniewicz
Kacper Rozmaryniewicz
Dielectric structures containing ferroelectret layers are commonly investigated because of their high piezoelectric activity. The mechanical properties of electret–gas-only ferroelectrets are limited; therefore, new layered structures containing nonelectret materials are explored. Separation of requirements related to the mechanical and electrical properties of particular layers is the latest concept to achieve structures with a higher piezoelectric response. This article presents an exemplary dielectric-layered structure exhibiting piezoelectric activity, where 3-D printed polylactic acid (PLA) mesh layer, polypropylene (PP) electret foil, and elastomer top layer are applied. The piezoelectric coefficient ${d}_{33}$ , measured under static conditions, is found to be at the level of 300 pC $\cdot \text{N}$ −1 . The simplified model of the structure is proposed to allow for the determination of the piezoelectric coefficient ${d}_{33}$ . Due to the presented model, an improvement of the piezoelectric response is possible by optimizing the electrical properties and geometry of the particular layers. A comparison of calculated and measured values of the ${d}_{33}$ coefficient confirms the validity of the proposed model. The influence of the poling voltage and the static pressure on the structure piezoelectric properties is experimentally examined.

5 June 2020 in Energies
Verified
Journal Article
Open access
PDF file
RKRyszard Kacprzyk
Ryszard Kacprzyk
AMAgnieszka Mirkowska
Agnieszka Mirkowska
Ferroelectret-based piezoelectric transducers are, nowadays, commonly used in energy harvesting applications due to their high piezoelectric activity. Unfortunately, the processing properties of such materials are limited, and new solutions are sought. This paper presents a new solution of a piezoelectric transducer containing electret bubbles immersed in an elastomer matrix. Application of a gas-filled dielectric bubble as the fundamental cell of the piezo-active structure is discussed. A simplified model of the structure, containing electret thin-wall bubbles and elastomer dielectric filling, was applied to determine the value of the piezoelectric coefficient, d33. An exemplary structure containing piezo-active bubbles, made of an electret material, immersed in an elastomer filling is presented. The influence of the mechanical and electrical properties of particular components on the structure piezoelectric properties are experimentally examined and confirmed. The quasi-static method was used to measure the piezoelectric coefficient, d33. The separation of requirements related to the mechanical and electrical properties of the transducer is discussed.

7 January 2025 in Smart Materials and Structures
Verified
Journal Article
Closed access
NPNatalia Puszczykowska
Natalia Puszczykowska
PRPiotr Rytlewski
Piotr Rytlewski
AMAgnieszka Mirkowska
Agnieszka Mirkowska
PAPiotr Augustyn
Piotr Augustyn
KFKacper Fiedurek
Kacper Fiedurek
The properties of polylactide (PLA) composites containing up to 40 vol% of barium titanate (BT) powder were investigated. PLA/BT composites were fabricated using twin-screw extrusion, which ensured uniform filler dispersion. The results demonstrated that increasing the BT content in PLA improved the thermal stability, stiffness, and degree of crystallinity of the composite. The piezoelectric coefficient d 33 also increased with higher BT content and longer polarization times, reaching a maximum value of 35 pC N−1 for composites containing 40 vol% BT. Additionally, the studies revealed that the d 33 coefficient is pressure dependent. Presented PLA/BT piezocomposites highlight the suitability of these materials for applications that require both biocompatibility and piezoelectric functionality, including regenerative medicine, energy harvesting, soft robotics, and electroactive biomedical devices.

8 May 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
Verified
Journal Article
Closed access
AMAgnieszka Mirkowska
Agnieszka Mirkowska
In the present study, the fabrication and properties of sandwich dielectric structures with piezoelectric response are studied. The construction of 3-layer sandwich dielectric structure, including electret and non-electret layers, exhibiting piezoelectric response is presented. The fabrication process including the 3-D printing method and the molding technique is described. The model allowing calculation of piezoelectric coefficient d33 for the designed structure is proposed. The electrical properties of particular layers were examined and the assumption made in derivation of the structure model is verified. Two different charging methods were applied to activate the piezoelectric properties of the structure. The maximal calculated value of the piezoelectric coefficient d33max is found to be approximately 613 pC/N. The calculated data are compared with the experimental results. The static coefficient measured d33 is found to be up to 544 pC/N. The influence of applied static pressure on piezoelectric properties was examined and power-function approximation was applied to received data. The time stability of the piezoelectric coefficient d33 in long-term was also noted. The influence of particular electrical and mechanical properties on piezoelectric d33 coefficient is discussed. The further research including modeling of mechanical properties of the structure is proposed.

18 August 2025 in Materials
Verified
Journal Article
Open access
PDF file
NPNatalia Puszczykowska
Natalia Puszczykowska
Piotr RytlewskiPiotr Rytlewski
Piotr Rytlewski
AMAgnieszka Mirkowska
Agnieszka Mirkowska
PCPaweł Cyprys
Paweł Cyprys
PAPiotr Augustyn
Piotr Augustyn
KFKacper Fiedurek
Kacper Fiedurek
Poly(lactic acid)/barium titanate (PLA/BT) composites exhibit piezoelectric properties desirable for bone tissue engineering, but their low biodegradability limits implant resorption. In this study, riboflavin (RF) is introduced as a dual-function additive that enhances biodegradation in PLA/BT composites. Its addition led to significantly increased microbial colonization and a five-fold higher mass loss compared to unmodified samples. These observations are consistent with the known polarity of RF and its role as a cofactor in microbial metabolism. The PLA/BT/RF composites are subjected to full characterization, including thermogravimetric analysis (TG), differential scanning calorimetry (DSC), tensile testing, dynamic mechanical analysis (DMA), dielectric permittivity measurements, and determination of piezoelectric coefficient d33. Compared to PLA/BT, RF-containing composites exhibit significantly accelerated biodegradation, with mass loss reaching up to 16% after 28 days, while maintaining functional piezoelectricity (d33 ≈ 3.9 pC/N). Scanning electron microscopy (SEM) performed after biodegradation reveals intensified microbial colonization and surface deterioration in the RF-modified samples. The data confirm that riboflavin serves as an effective modifier, enabling controlled biodegradation without compromising electromechanical performance. These results support the use of PLA-based piezoelectric composites for resorbable biomedical implants.

6 December 2024 in PRZEGLĄD ELEKTROTECHNICZNY
Verified
Journal Article
Closed access
KKKrawczyk Krystian
Krawczyk Krystian
AMAgnieszka Mirkowska
Agnieszka Mirkowska
BKBartłomiej KOCJAN
Bartłomiej KOCJAN
PZPawel Zylka
Pawel Zylka
W referacie przedstawiono konstrukcję zmodernizowanej komory termostatycznej. Opisano system do pomiaru gradientu i stabilności temperatury w objętości komory. Przedstawiono procedurę wzorcowania czujników temperatury, dobór punktów pomiarowych oraz procedurę pomiaru rozkładu temperatury i jej stabilności w czasie. Zaprezentowano i omówiono również przykładowe wyniki pomiarów.