The article discusses the effect of milling strategies on surface quality and geometric deviations during pocket milling when the perpendicular position of the tool is used. For experimental research, an aluminum alloy, AlCu4Mg, was used. For the production, a three-axis milling machine was used, and consequently, the geometric deviations and roughness parameters of the machined surface were evaluated. Also, the surface texture from each strategy was compared. For the production strategy, the constant Z, circular pocket, constant stepover pocket auto border, and spiral strategies were used. The geometric characteristic evaluation showed the influence of the ball end mill used in the machining process. Constant Z strategy achieved the lowest shape deviations. In the spiral strategy, it was possible to observe an effect of plowing, where the cutting tool crushed the material at the tool center. There was a minimal effect on the surface texture in the circular pocket and constant stepover pocket auto border strategies. Using the constant Z strategy, a non-oriented surface texture was obtained. 3D maps of the extracted residual scallop height for each strategy were observed when examining the surface texture. The roughness parameters Ra and Rz for the circular pocket and constant stepover pocket auto border strategies were the lowest.
Shaped surfaces are increasingly used in the field of mold-making for casting or injection molding, where future products include shapes with different curvatures. These are surfaces that form convex curves, concave curves, or a combination thereof. Given these machined surfaces, it is important to know the impact of the finishing strategies on these surfaces. This paper deals with the comparison of finishing milling strategies in the production of shaped surfaces and the analysis of different methods for the evaluation of surface topography. In addition, the experimental results evaluate the roughness of the machined surface and surface shape variations. The material used for the experiments was AlCu4Mg aluminum alloy, and Constant Z, spiral and spiral circle strategies were chosen for the finishing strategies. The evaluation of surface topography and surface roughness was carried out at three different specimen heights with respect to the tool’s contact with the machined surface.
This paper deals with various automated milling strategies and their influence on the accuracy of produced parts. Among the most important factors for surface quality is the automated milling strategy. Milling strategies were generated from two different programs, CAM system SolidCAM, with the help of workshop programming in the control system Heidenhain TNC 426. In the first step, simulations of different toolpaths were conducted. Using geometric tolerance is becoming increasingly important in robotized production, but its proper application requires a deeper understanding. This article presents the measurement of selected planes of robotized production to evaluate their flatness, parallelism and perpendicularity deviations after milling on the coordinate measuring machine Carl Zeiss Contura G2. Total average deviations, including all geometric tolerances, were 0.020 mm for SolidCAM and 0.016 mm for Heidenhain TNC 426. The result is significantly affected by the flatness of measured planes, where the overlap parameter of the tools has a significant impact on the flatness of the surface. With interchangeable cutter plate tools, it is better to use higher overlap to achieve better flatness. There is a significant difference in production time, with SolidCAM 25 min and 30 s, and Heidenhain 48 min and 19 s. In accordance with these findings, the SolidCAM system is more suitable for production.
Simulation tools play an important role not only in terms of understanding the processes taking place in the production, and the possibility to prevent failures, but ultimately, and most importantly, to optimize the production process. Thus, simulation tools should be able to work with many input parameters. The processes in which many parameters influence the final quality of the part, and its properties is metal additive manufacturing (AM). The volume of support material used in the metal AM process is also of importance, as its reduction plays an important role in terms of cost-effectiveness, which can be increased by minimizing support structures. The paper deals with the numerical simulation of the metal AM process. The simulation analyses with the same input parameters were performed, comparing each other the support material distribution, volume fraction or shape deviation with respect to the conventional support generation method and the function allowing the support generation by means of the optimization mode. Less variation in the shape of the part, variation in its volume fraction, variation in the density of the generated support structures as well as variation in the spacing of the generated support structure was achieved by using the support generation optimization mode.
This paper presents an analysis and the research results of system couplers in CAx systems that ensure the correct transfer of product data from the “supplier” system to the “recipient” system. This study presents the results of the compatibility tests between the systems based on the verification of geometric models and their attributes after importing/exporting 2D and 3D objects using neutral data exchange formats. The purpose of the research was to identify neutral formats that do not introduce errors after data transversion in certain types of geometry. Tests and analyses were carried out on selected formats depending on the type of object, such as 2D objects (DXF), solid objects (IGES, STEP, SAT, and PARASOLID), and surface objects (IGES, STEP, SAT, and X_T). One of the results of our research and analysis is the need for continuous development of CAD/CAE systems because current neutral formats are not 100% effective.
This review describes the process of metal additive manufacturing and focuses on the possibility of correlated input parameters that are important for this process. The correlation of individual parameters in the metal additive manufacturing process is considered using simulation tools that allow the prediction of various defects, thus making the real production process more efficient, especially in terms of time and costs. Special attention is paid to multiple applications using these simulation tools as an initial analysis to determine the material’s behavior when defining various input factors, including the results obtained. Based on this, further procedures were implemented, including real production parts. This review also points out the range of possible variations that simulation tools have, which helps to effectively predict material defects and determine the volume of consumed material, supports construction risk, and other information necessary to obtain a quality part in the production process. From the overview of the application of simulation tools in this process, it was found that the correlation between theoretical knowledge and the definition of individual process parameters and other variables are related and are of fundamental importance for achieving the final part with the required properties. In terms of some specific findings, it can be noted that simulation tools identify adverse phenomena occurring in the production processes and allow manufacturers to test the validity of the proposed conceptual and model solutions without making actual changes in the production system, and they have the measurable impact on the design and production of quality parts.