Extracellular electron transfer in microorganisms has been applied for bioelectrochemical synthesis utilizing microbes to catalyze anodic and/or cathodic biochemical reactions. Anodic reactions (electron transfer from microbe to anode) are used for current production and cathodic reactions (electron transfer from cathode to microbe) have recently been applied for current consumption for valuable biochemical production. The extensively studied exoelectrogenic bacteria Shewanella and Geobacter showed that both directions for electron transfer would be possible. It was proposed that gram-positive bacteria, in the absence of cytochrome C, would accept electrons using a cascade of membrane-bound complexes such as membrane-bound Fe-S proteins, oxidoreductase, and periplasmic enzymes. Modification of the cathode with the addition of positive charged species such as chitosan or with an increase of the interfacial area using a porous three-dimensional scaffold electrode led to increased current consumption. The extracellular electron transfer from the cathode to the microbe could catalyze various bioelectrochemical reductions. Electrofermentation used electrons from the cathode as reducing power to produce more reduced compounds such as alcohols than acids, shifting the metabolic pathway. Electrofuel could be generated through artificial photosynthesis using electrical energy instead of solar energy in the process of carbon fixation.
Rice husks are a feedstock of biogenic silica because of their high silica content. After silica extraction, a solid residue comprising mostly carbohydrates is present. Solid residue valorization is important for closed-loop systems using rice husk and has minimal negative environmental impacts. In this study, we used solid rice husk that was generated by silica extractionto anaerobic digestion for producing biomethane. The rice husk residue was characterized in terms of total solids, volatile solids, pH, composition, and particle size. Changing the characteristics increased biogas production by 2.48-fold compared to that of raw rice husk. The residue produced 166.4 mL-biogas g−1 vs. and 100.4 mL CH 4 g−1 VS, much more than previously reported. Microbial community analysis, which was conducted to investigate the biological reasons for increased biogas and methane, found increased Bacteroidetes levels in the rice husk samples. Among archaeal communities, Bathyarchaeota was more abundant in all rice husk samples than in the inoculum. The rice husk residue contained more operational taxonomic units than other samples. These changes in the microbial community significantly influenced the anaerobic digestion of the rice husk residue and improved methane production. Our findings provide a basis for the cleaner utilization of rice husk residue to produce renewable energy.
Volatile fatty acids can be used as carbon sources for denitrification and are easily supplied as by-products from the anaerobic digestion of waste materials. Nitrification and denitrification processes were carried out in a single reactor feeding volatile fatty acids as electron donors and the changes in microbial communities in the reactor were investigated. The microbial communities in the alternating aerobic and anoxic systems were different, and their structure flexibly changed within one reactor. Bacteroidetes and Firmicutes were highly distributed during denitrification, whereas Proteobacteria was a major phylum during nitrification. In addition, in the denitrification system, the microbial community was substrate dependent. It showed the sequential nitrogen removal in one reactor and the microbial community also followed the change of environmental condition, cyclic nitrification, and denitrification.
Methane production was carried out in two different types of reactors using a thermophilic and hydrogenotrophic methanogen, Methanothermobacter sp. KEPCO-1, which converts hydrogen and carbon dioxide into methane at 60 °C. The two reactors used for methane production were stirred-tank reactor (ST) and a bubble column reactor (BC), which were selected because they can provide a good comparison between the medium agitation type and gas–liquid mass transfer. The specific growth rate of KEPCO-1 in the ST and BC was 0.03 h−1 and 0.07 h−1, respectively. The methane conversion rate increased to 77.8 L/L/d in the ST and 19.8 L/L/d in the BC. To prevent the dilution of nutrients in the medium by the water generated during the hydrogenotrophic methanation reaction, a membrane distillation (MD) process was applied to selectively remove water from the culture medium. The MD process selectively removed only water from the medium. Fouling by KEPCO-1 had a negligible effect on flux and showed a high removal performance flux of 16.3 ± 3.1 L/m2/h. By operating the MD process in conjunction with the hydrogenotrophic methanation process, it is possible to prevent the dilution of the nutrients in the medium by the water generated during the methanation process, thereby maintaining stable microbial growth and methanation activity.
Anaerobic digestion using cigarette butts, one of most littered items, was studied not only as a waste treatment, but also as an energy production method. Methane production from cigarette butts was measured through the biochemical methane potential (BMP) test and it was evaluated whether it is possible to produce electrical energy. Intact cigarettes or individual components (filter, paper, and leaf) were supplied as the sole carbon source (substrate) for the BMP test. The tendency of methane production indicated biodegradation in the order of paper, filter, and leaves; however, the filter of cigarettes was the substrate produced the highest amount of methane per total solid. The microbial community was also analyzed in each anaerobic digestion reactor, and substrate-specific microorganisms were identified, such as Proteiniphilum strain (filter) and Methanobacterium formicicum (paper). In intact cigarettes, the related microbial community became dominant over time in the order of paper, filter, and leaf. The conversion of cigarette butts to methane, a renewable energy source, can be proposed as a sustainable route for energy demand, for example, in a smoking room.
2 January 2020 in Microbiology Resource Announcements
Here, we describe the complete genome of Methanothermobacter sp. strain KEPCO-1, a thermophilic and hydrogenotrophic methanogen that was isolated from an anaerobic digester in Seoul, Republic of Korea. The genome of KEPCO-1 shares 96.98% of its sequence with Methanothermobacter marburgensis strain DSM 2133 and consists of 1,741,029 bp, with 1,822 protein-coding genes, 44 noncoding RNAs, and a GC content of 48.47%. The development of this genome will facilitate future genomic studies of KEPCO-1.