Electricity demand is increasing, as a result of increasing consumers in the electricity market. By growing smart technologies such as smart grid and smart energy management systems, customers were given a chance to actively participate in demand response programs (DRPs), and reduce their electricity bills as a result. This study overviews the DRPs and their practices, along with home energy management systems (HEMS) and load management techniques. The paper provides brief literature on HEMS technologies and challenges. The paper is organized in a way to provide some technical information about DRPs and HEMS to help the reader understand different concepts about the smart grid, and be able to compare the essential concerns about the smart grid. The article includes a brief discussion about DRPs and their importance for the future of energy management systems. It is followed by brief literature about smart grids and HEMS, and a home energy management system strategy is also discussed in detail. The literature shows that storage devices have a huge impact on the efficiency and performance of energy management system strategies.

Response surface methodology (RSM) is used in this study to optimize the thermal characteristics of single graphene nanoplatelets and hybrid nanofluids utilizing the miscellaneous design model. The nanofluids comprise graphene nanoplatelets and graphene nanoplatelets/cellulose nanocrystal nanoparticles in the base fluid of ethylene glycol and water (60:40). Using response surface methodology (RSM) based on central composite design (CCD) and mini tab 20 standard statistical software, the impact of temperature, volume concentration, and type of nanofluid is used to construct an empirical mathematical formula. Analysis of variance (ANOVA) is applied to determine that the developed empirical mathematical analysis is relevant. For the purpose of developing the equations, 32 experiments are conducted for second-order polynomial to the specified outputs such as thermal conductivity and viscosity. Predicted estimates and the experimental data are found to be in reasonable arrangement. In additional words, the models could expect more than 85% of thermal conductivity and viscosity fluctuations of the nanofluid, indicating that the model is accurate. Optimal thermal conductivity and viscosity values are 0.4962 W/m-K and 2.6191 cP, respectively, from the results of the optimization plot. The critical parameters are 50 °C, 0.0254%, and the category factorial is GNP/CNC, and the relevant parameters are volume concentration, temperature, and kind of nanofluid. From the results plot, the composite is 0.8371. The validation results of the model during testing indicate the capability of predicting the optimal experimental conditions.

The smart street-lighting system (SSLS) is a leading candidate in the smart city. By the time of the last 15 cycles, many meaningful improvements have been executed in the SSLS with the impact of the internet of things technologies and universal networking devices. Conventional smart street lighting systems are restricted to wireless sensor networks, mobile devices, and old lighting control systems. This article presents a comprehensive treatment of network designs, namely communication, control, and wireless sensor-based smart street lighting system by deploying based on their existing system architecture, and network topologies including leading with it a host of privileges. In addition, choosing the right lighting class, high-intensity discharge (HID) lights, and retrofitting lighting technologies have all been covered in detail. This paper's objective is to evaluate various control technologies that may support the many applications deployed on networked streetlights. Moreover, issues and recommendations, distinguished in this paper, will pave the route for future smart street lighting systems that promote a reliable and seamless driving experience and are energy-efficient for environmental sustainability. It is far anticipated that LoRa and Sigfox with additional gateways could be the best possible smart street lighting system options as these technologies are facilitated for long distances but with a limited data rate. It is way more suitable for lighting control compared to other protocols to control thousands of streetlights.

In modern industrial automation, optimizing the performance of Programmable Logic Controller (PLC)-based PID controllers is critical for ensuring precise process control. This study presents a novel methodology for the dynamic tuning of built-in Proportional-Integral-Derivative (PID) controllers in PLCs using a hybrid algorithm that combines Particle Swarm Optimization (PSO) and Multiple-Adaptive Neuro-Fuzzy Inference System (MANFIS). Classical PID tuning methods, such as Ziegler–Nichols and Cohen–Coon, have traditionally been employed in industrial control systems. However, these methods often struggle to address the complexities of nonlinear, time-varying, or highly dynamic processes, resulting in suboptimal performance and limited adaptability. To overcome these challenges, the proposed PSO-MANFIS hybrid algorithm leverages the global search capabilities of PSO and the adaptive learning abilities of MANFIS to optimize PID parameters in real-time dynamically. Integrating MATLAB (R2021a) with industrial automation systems via an OPC (OLE for Process Control) server utilizes advanced optimization algorithms within MATLAB to obtain the best possible parameters for the industrial PID controller, enhancing control precision and optimizing production efficiency. This MATLAB-PLC interface facilitates seamless communication, enabling real-time monitoring, data analysis, and the implementation of sophisticated computational tools in industrial environments. Experimental results demonstrate superior performance, with reductions in rise time from 93.01 s to 70.98 s, settling time from 165.28 s to 128.84 s, and overshoot eliminated from 0.0012% to 0% of the controller response compared to conventional tuning. Furthermore, the proposed approach achieves a reduction in Root Mean Square Error (RMSE) by approximately 56% to 74% when compared with the baseline performance. By integrating MATLAB’s computational capabilities with PLC-based industrial automation, this study provides a practical and innovative solution for modern industries, offering enhanced adaptability, precision, and reliability in dynamic control applications, ultimately leading to optimized production outcomes.