Water-assisted, or more generally liquid-mediated, melt compounding of nanocomposites is basically a combination of solution-assisted and traditional melt mixing methods. It is an emerging technique to overcome several disadvantages of the above two. Water or aqueous liquids with additives, do not work merely as temporary carrier materials of suitable nanofillers. During batchwise and continuous compounding, these liquids are fully or partly evaporated. In the latter case, the residual liquid is working as a plasticizer. This processing technique contributes to a better dispersion of the nanofillers and affects markedly the morphology and properties of the resulting nanocomposites. A survey is given below on the present praxis and possible future developments of water-assisted melt mixing techniques for the production of thermoplastic nanocomposites.

Thermally conductive polymer crystals are of both fundamental and practical interest for their high thermal conductivity that exceeds that of many metals. In particular, polyethylene fibers and oriented films with uniaxial thermal conductivity exceeding 50 W ⋅ m − 1 ⋅ K − 1 have been reported recently, stimulating interest into the underlying microscopic thermal transport processes. While ab initio calculations have provided insight into microscopic phonon properties for perfect crystals, such properties of actual samples have remained experimentally inaccessible. Here, we report the direct observation of thermal phonons with mean free paths up to 200 nm in semicrystalline polyethylene films using transient grating spectroscopy. Many of the mean free paths substantially exceed the crystalline domain sizes measured using small-angle X-ray scattering, indicating that thermal phonons propagate ballistically within and across the nanocrystalline domains; those transmitting across domain boundaries contribute nearly one-third of the thermal conductivity. Our work provides a direct determination of thermal phonon propagation lengths in molecular solids, yielding insights into the microscopic origins of their high thermal conductivity.

Thermoplastic starch (TPS) biocomposites modified with cellulose microfibers and/or natural rubber were prepared via extrusion compounding. Glycerol and water served as plasticizers for starch. The dielectric properties of the TPS composites were examined via broadband dielectric spectroscopy in the temperature and frequency ranges of 30°C-65°C and 0.1Hz-10MHz, respectively. Each specimen was tested twice in order to study the effect of absorbed water. The hydrophobic/hydrophilic character of the modifiers governed the dielectric performance of the corresponding TPS biocomposites. Conducted analysis revealed two relaxation processes attributed to matrix-water-reinforcement interfacial polarization and glass to rubber transition of the TPS. Evaporation of water significantly affected the first process and only slightly the second one. Energy density, prior and after water evaporation, was also determined at constant field. By employing dielectric reinforcing function the contributions of water-assisted and constituents' originated interfacial phenomena could be separated.