The paper presents the results of analytical and experimental studies of the hydrodynamics of the translational−rotational motion of incompressible gas flow within a working space of a variable-geometry vortex heat generator. The terminal velocity and pressure have been identified analytically. The effect of vortex generation on the ratio of the parameters has been analyzed. A mathematical model has been developed with a simplified design scheme that simulates the movement inside a vortex channel with fixed elements. On the basis of mathematical modelling, the influence of the apparatus-constructive (AC) design of the working space of a vortex heat generator on the generation of vortices inside the apparatus has been analyzed. The influence of the main geometric and hydrodynamic parameters of the device on the indicators of its energy efficiency has been investigated. The obtained models show the critical regions where the most intense cavitation zones are possible. An analysis of the hydrodynamics of the incompressible gas motion within the working space of the newly designed vortex heat generator with variable geometry has helped define both the terminal velocity and pressure. In addition, the effect of the facility geometry on the generation of vortices favoring cavitation was determined. The model studies have been carried out in terms of liquid loading changes in the 0.001–0.01 m³/s range. The changes in a velocity field within a working channel have been analyzed for the channel geometry, where a cone angle $\gamma$ is 0° to 25°, with 130, 70, and 40 mm widths for the working channel. It has been identified that a sufficient axial symmetry of the heat carrier along a vortex accelerator enables the heat carrier inlet through a turbulizing nozzle. The dependence of the nozzle area, the effect on the efficiency of the vortex heat generator angle of attack of the vortex accelerator, and the ratio of the length and diameter of the vortex zone of the heat generator to its energy efficiency in general have been defined experimentally. These studies could be instrumental in the design of vortex heat generators whose geometry corresponds to the current requirements concerning energy efficiency. It has been found that the geometry of the vortex accelerator improves the operation of the heat generator by 35% in comparison with similar available designs.

The effect of basic parameters of the channels of disk pulse devices on the heat exchange efficiency was studied both analytically and experimentally, especially in terms of pulse acting on the heat carrier. A methodology to determine the main parameters, namely the pressure and the temperature of the heat carrier as well as the pulse effect on the fluid, was proposed. The mathematical models of the effect of the structural and technological parameters of the channels in the disk pulse device on the heat exchange efficiency were developed. The models’ adequacy was proved based on a series of experimental studies involving devices with one-stage and multistage systems of pulsed heat carrier processing. This enabled the development, testing, and implementation of practical construction designs of pulse disk heat generators for decentralized heating of commercial and domestic buildings with one-stage and multistage systems of pulsed heat carrier processing. Taking into account the results of the mathematical modeling, the developed method of multistage pulse action was proved experimentally and implemented in regard to the structural design of a working chamber of the disk pulse heat generator. An efficient geometry of the working chamber of the disk pulse heat generator was specified for its further integration into the system of decentralized heat supply. One of the developed heat generators with the multistage pulse action on the heat carrier was integrated into the heating system of a greenhouse complex with a 0.86–0.9 efficiency coefficient.

Research of the impact of the method of heating of heat units on the qualitative characteristics of treated materials

Analytical and experimental studies into the processes of hydrodynamics and heat exchange in the channels of disk pulse devices

The object of research is a mathematical model of a new design of a vortex heat generator with translational-rotational flow in a variable geometry working space. One of the most problematic areas in the development of new and promising designs of heat generators by the method of physical modeling is the search for its optimal operating-technological and instrumental-design parameters. The implementation of a preliminary analysis of such structures by the method of mathematical modeling will significantly reduce the time and material costs for the development of promising designs of heat generators. The studies of the design of the new vortex heat generator, carried out by the method of mathematical modeling, made it possible to determine the range of its operation, to evaluate the operating-technological and hardware-design parameters that affect the efficiency of work. Studies of the hydrodynamics of the translational-rotational motion of a viscous fluid flow in the working space of a new vortex heat generator with a variable geometry of the working space made it possible to determine the critical velocity and pressure, the influence of the geometric parameters of the device on the generation of vortices that promote cavitation. Model studies were carried out in the range of fluid load changes in the range from 0.001 m3/s to 0.01 m3/s. The study of changes in the velocity field in the channels was carried out for the geometry of the channel with a taper angle from 0° to 25°. The width of the working channel of the space Wn varied in the range of 130, 70 and 40 mm. It has been established that a good axial symmetry and smoothness of the coolant flow in the vortex zone along the swirler screw provides the coolant inlet through a nozzle with a rectangular cross-section. The dependence of the influence of the flow area of the nozzle for introducing the coolant into the vortex zone on the energy efficiency of the vortex apparatus as a whole is found experimentally. The research carried out makes it possible to design vortex heat generators with geometric parameters that meet modern energy efficiency requirements. The geometry of the swirler screw is determined, which increases the efficiency of the heat generator by 35 % in comparison with similar designs of vortex heat generators given in the literature.