Friction Stir Welding (FSW) is a solid state joining technique which is universally used for joining of aluminium alloys in marine, aerospace, automotive and many other applications of commercial importance. In the present study, the effect of FSW parameters on the weldability of dissimilar aluminium alloys called AA2024 and AA6061 was investigated. The two plates were aligned perpendicular to the rolling directions and the welding was carried out. The main objective of the experiment was to find out the maximum tensile strength. The experiments were conducted on a milling machine. Three-factor three levels Box–Behnken matrix in response surface methodology is employed to carry out the experimental investigation. The “Design Expert 8.0” software was used for regression and graphical analyses of data collected. Analysis of variance was used to check the validity of the model. Designed FSW experiments were carried out to get high strength welding by controlling the rotational, welding speed and tool pin diameter. The tensile tests were carried under tension at room temperature in order to analyse the mechanical response.
In recent years, Glass Fiber Reinforced Plastic (GFRP) composites are more potential materials for usage in various structural applications in aerospace and automobile industries, owing to its favorable properties, such as light weight, specific strength, high elastic modulus and excellent corrosion resistance. This paper presents a new hybrid approach for multi-objective optimization of machining parameters on GFRP composite using Taguchi coupled grey relational (GR) and desirability function (DF) approach. The end milling of GFRP composite was performed as per Taguchi’s L16 orthogonal array by considering three input parameters: viz cutting speed (V), feed rate (F) and depth of cut (D), each at four levels. The material removal rate (MRR), surface roughness (SR) and tool wear (TW) were chosen as output responses. The main effect plot was used to determine the optimum level of machining parameters on the multiple responses. An experimental result revealed that, the optimum level of parameters obtained by GR analysis is V 2 F 3 D 4 . Similarly, the optimum level of parameters obtained by DF approach is V 2 F 4 D 4. Moreover, analysis of variance (ANOVA) was applied to examine the significance of the parameters. Based on the ANOVA results, it has been proved that the depth of cut was the most significant parameter, trailed by feed rate and cutting speed, respectively. It was also confirmed that the P-values of depth of cut for both analyses are 0.017 and 0.039, which is less than 0.05. Finally, the confirmation tests exhibited that the DA approach was employed better in terms of determining the optimum level of machining parameters as compared to GR analysis.
In this investigation, the mechanical behaviour and microstructural examination of friction stir processed (FSP) Tungsten Inert Gas (TIG) welded aluminium dissimilar alloys has been studied. The research is proposed to enhance the mechanical characteristics of the aluminium alloy 5052-H32 and aluminium alloy 5083-H111 TIG FSP welded joints. Initially, the TIG welding was done to join aluminium alloy 5052-H32 and aluminium alloy 5083-H111 by employing a ER5356 filler rod. TIG welding is performed by using the following parameters: tungsten electrode diameter (2.4 mm), Current (170 A) and a shielding gas flow rate (argon) (11 l·min-1). Secondarily, the FSP is carried out on TIG welded aluminium alloy 5052-H32 and aluminium alloy 5083-H111 by using different tool rotation speeds (850 to 1050 rpm), tool traverse speeds (24 to 32 mm·min-1) and different number of passes (1 to 3) with a cylindrical pin less tool. The FSP parameters are designed by the Taguchi L9 array to compute the optimized parameters. The tensile strength, microhardness and % of elongation are determined for a total of nine specimens. Finally, the grey relational analysis (GRA) is employed to find out the best FSP parameter out of the set of FSP parameters. The optimal parameters of FSP are a tool rotation speed of 950 rpm, tool traverse speed of 28 mm/min and number of passes of 3. The number of passes are the most influencing factor when compared to other two FSP parameters.
The aim of the present work is to examine the influence of processing parameters on fabricated composites of LM25 alloy with SiC particle reinforcement through a squeeze casting technique. The following process parameters, like stirring speed from 550 to 750 rpm, SiCP (4 wt% to 8 wt %), and melting temperatures (from 600 to 700 °C) were employed. Then, the processed composites were subjected to microscopy analysis and mechanical tests to ascertain their metallurgical and mechanical properties. SEM micrographs of an LM 25 composite sample show better bonding of SiC particles with matrix, which is due to homogeneous dispersion of SiC particles in the stir casting process. The maximum tensile strength (211 MPa) and hardness (91 Hv) were achieved on the composite samples with processing parameters of 750 rpm stirring speed, 8% SiC proportions, and 650 °C melting temperature, respectively. From the design of the experiment by the Taguchi method, it is observed that the stirring speed plays a significant role in achieving a better distribution of SiC particles in the composite samples than other parameters like SiC weight ratios and the melting temperature of the alloy.
The effect of different process parameters on Tungsten Inert Gas (TIG) welded dissimilar aluminium magnesium alloy AA5083-H111 and AA5052-H32 by using ER5356 filler rod and scandium added ER5356 composites is investigated in this research. Extremely required in the automobile and aerospace industries, some defects like micro pores and weaken the fusion zone on the joint are identified with ER5356 filler rod. To resolve these defects, scandium added ER5356 composite filler rod is used to compose the TIG welded joints with free defects. There are three different TIG welding process parameters like Current (A), gas flow rate (L/min) and (0, 0.25 and 0.5 wt% of Scandium with ER5356 filler rod are used by Taguchi L9 method. The macrostructure, microstructure and mechanical properties of TIG welded joints are investigated on all the welded samples. To optimize the process parameter is more significant, therefore grey relational analysis used to optimize the parameters with identified mechanical properties tensile strength and micro hardness, respectively. Out of different process parameters, joint made with process parameter current at 190 A, gas flow rate 10 l min−1 and 0.50% scandium added ER5356 enhances the mechanical properties (264 MPa and 119 Hv) which is maximum than other scandium free ER5356 and 0.255 scandium filler rod and enhanced strength welded sample exhibited fine grain refinement on the weld seam. Due to added scandium on the welded zones, secondary phase particles are generated during SEM examination and the optimized samples were utilized for fractography test to exhibit the ductile nature in fractured area. The EDS mapping also shows the elemental distribution on the welded zones, the scandium plays the major role as a better reinforcement to improve intermetallic strength. Finally, the grey with ANOVA also proves that the scandium added joints achieves influencing process parameters.