For the analysis of the process of partial demagnetization of permanent magnets (PMs) in electric machines, a field model of coupled electromagnetic and thermal phenomena was proposed. In the proposed approach the non-linearity of the magnetic circuit, the effect of temperature on the magnetic, electrical and thermal properties of the materials as well as the developed method for modeling the process of partial demagnetization of the PMs were taken into account. In order to verify the usefulness and effectiveness of the developed algorithm as well as software for analyzing the impact of temperature and the process of partial demagnetization of the magnets on the operation of a PM motor, the results of calculations were compared with the results of experimental studies. The experimental tests were carried out on a specially designed and constructed measuring test stand. The results of the research on the process of partial demagnetization of magnets in the line start permanent magnet synchronous motor (LSPMSM) are presented and the conclusions resulting therefrom have been formulated.

The paper justifies the validity of analyzing the impact of temperature and the process of partial demagnetization of magnets on the operating parameters of machines. To analyze this impact, a field model of coupled electromagnetic and thermal phenomena in a permanent magnet synchronous motor was proposed. The non-linearity of the magnetic circuit, the effect of temperature on the magnetic, electrical and thermal properties of the materials as well as the developed method of modeling the process of partial demagnetization of the magnet were taken into account. Based on this model, an algorithm and software were developed to analyze the effect of temperature and the process of partial demagnetization of magnets on the work of the line start permanent magnet synchronous motor (LSPMSM). The elaborated software was used to study the effect of temperature during the motor starting phase on the magnetization state of the magnets after the start-up process. The calculation results were compared to the results of experimental studies. The experimental tests were carried out on a specially constructed test stand. The results of the research on the process of partial demagnetization of the magnets are presented and the conclusions resulting therefrom formulated.

The work presented here describes the first results of an effective method of assessing the quality of electrostatic separation of mixtures of polymer materials. The motivation for the research was to find an effective method of mechanical separation of plastic materials and a quick assessment of the effectiveness of the method itself. The proposed method is based on the application of a dedicated vision system developed for needs of research on electrostatic separation. The effectiveness of the elaborated system has been demonstrated by evaluating the quality of the separation of mixtures of poly (methyl methacrylate) (PMMA) and polystyrene (PS). The obtained results show that the developed vision system can be successfully employed in the research on plastic separation, providing a fast and accurate method of assessing the purity and effectiveness of the separation process.

The paper presents a 2D field-circuit model of coupled electromagnetic thermal and mechanical phenomena in a line start permanent magnet synchronous motor (LSPMSM). The nonlinearity of the magnetic circuit, the influence of temperature on magnetic properties of the permanent magnets as well as on electric and thermal properties of the materials have been taken into account. The elaborated on the basis of this model algorithm as well as a developed computer program have been used to analyze the influence of temperature and armature reaction on the magnet stabilization during the starting process of the considered motor. The selected results of simulations have been presented and discussed.

Purpose: This paper aims to elaborate the method and algorithm for the analysis of the influence of high temperature on electric and thermal properties of the materials, as well as thermal phenomena process. Design/methodology/approach: The paper presents specially author’s software for the transient finite element analysis of coupled electromagnetic-thermal problems in a squirrel cage induction motor. The numerical implementation is based on finite element method and step-by-step algorithm. The nonlinearity of a magnetic circuit, the dependence of electric and thermal parameters on temperature, the movement of a rotor and skewed rotor bars have been taken into account. To verify the developed algorithm and software, the influence of high ambient temperature on selected electromagnetic and thermal parameters of the induction motor was examined. Findings: The results of simulations compared with measurements confirm the adequacy of this approach to the analysis of coupled electromagnetic-thermal problems. Research limitations/implications: 3D effects have only been taken into account when using quasi-3D techniques (e.g. the multi-slice for skewed rotor slots). Practical implications: The author’s software developed can be useful in the analysis and design of squirrel cage motors, especially motors working in high ambient temperature. Originality/value: The paper offers appropriate author’s software for the transient and steady-state analysis of coupled electromagnetic and thermal problems in squirrel cage motors with skewed slots.

The aim of this study was to investigate and analyze the impact of selected parameters during the tribocharging process of shredded poly(ethylene terephthalate) (PET) and high-density polyethylene (PE-HD) plastics on accumulated electric charge and electrostatic separation effectiveness. The accumulation of electric charge on surfaces of polymer particles as a result of their circular motion forced by the airflow cyclone container was investigated. The impact of the container material, time of tribocharging and the airflow intensity were experimentally examined. A container in which the particles of the considered polymers are electrified with opposite charges was selected. A high ability to accumulate surface charge on small particles of both polymers was demonstrated. The electrified mixed PET/PE-HD was subjected to a separation process. An electrostatic separator designed and constructed by the authors was used for to the separation. In turn, to assess the effectiveness of this separation, a dedicated vision system was used. Based on the result of the carried out tests, it has been assumed that the proposed approach’s effectiveness has been demonstrated by means of empirical validation.