In this paper, we present the optical and electrical properties of surface-patterned GaAs-based Multiquantum Well (MQW) light emitting diodes (LEDs) with one- and two-dimensional photonic crystal (PhC) structures. Optical properties were analyzed in the near and far field, measured by a near-field scanning optical microscope and with a goniophotometer. We demonstrated a strong effect of patterned PhC on the radiation properties and the light extraction efficiency. Enormous surface emission enhancement reaching 110% confirmed the strong effect of the patterned structure on the coupling of the guided modes into the surface emission. Additionally, the considerable effect of the PhC structure diffraction on radiation pattern was confirmed in the near and far field and is in good agreement with the simulated shape of the optical field.
This contribution presents experimental results in the field of planar two-dimensional (2D) photonic crystal (PhC) structures, as well as their design, fabrication and analysis. We demonstrate maskless optical methods leading to fabrication of 2D PhC structures for applications in optoelectronics. The 2D PhC structures of square and triangular symmetries with period from 275 nm to 2 μm were fabricated in thin photoresist layer, III-V semiconductor surfaces and polymethylmethacrylate using interference lithography and near-field scanning optical microscope lithography. The 2D PhC structures prepared in GaAs surface were used as a mold for nanoimprint lithography in polymethylmethacrylate.
It was confirmed that photonic crystals (PhC) have the considerable effect on enhancement of extraction efficiency of light emitting diodes (LED) by minimizing the total internal reflection of the light escaping the LED chip. The enhancement of the extraction efficiency requires a structure design that optimizes the interaction of the guided modes with the PhCs. It strongly depends on the structure parameters as depth, period and filling factor. On the other side, choice of PhC geometry plays important role in determining of far-field radiation pattern diagram of the LED. From the point of structure shape and geometry, different PhC and photonic quasicrystals (PQC) were investigated. The PQCs with high level of symmetry produce less directional emission and it favors the PQC structure for application in LED.
27 September 2019 in Advances in Electrical and Electronic Engineering