During its commissioning phase, the Copernicus Sentinel-3B satellite has been placed in a tandem formation with Sentinel-3A for a period of 6 months. This configuration allowed a direct comparison of measurements obtained by the two satellites. The purpose of this paper was to present the range of analyses that can be performed from this dataset, highlighting methodology aspects and the main outcomes for each instrument. We examined, in turn, the benefit of the tandem in understanding instrument operational modes differences, in assessing inter-satellite differences, and in validating measurement uncertainties. The results highlighted the very good consistency of the Sentinel-3A and B instruments, ensuring the complete inter-operability of the constellation. Tandem comparisons also pave the way for further improvements through harmonization of the sensors (OLCI), correction of internal stray-light sources (SLSTR), or high-frequency processing of SRAL SARM data. This paper provided a comprehensive overview of the main results obtained, as well as insights into some of the results. Finally, we drew the main lessons learned from the Sentinel-3 tandem phase and provided recommendations for future missions.

This work presents the latest calibration results for the Copernicus Sentinel-3A and -3B and the Jason-3 radar altimeters as determined by the Permanent Facility for Altimetry Calibration (PFAC) in west Crete, Greece. Radar altimeters are used to provide operational measurements for sea surface height, significant wave height and wind speed over oceans. To maintain Fiducial Reference Measurement (FRM) status, the stability and quality of altimetry products need to be continuously monitored throughout the operational phase of each altimeter. External and independent calibration and validation facilities provide an objective assessment of the altimeter’s performance by comparing satellite observations with ground-truth and in-situ measurements and infrastructures. Three independent methods are employed in the PFAC: Range calibration using a transponder, sea-surface calibration relying upon sea-surface Cal/Val sites, and crossover analysis. Procedures to determine FRM uncertainties for Cal/Val results have been demonstrated for each calibration. Biases for Sentinel-3A Passes No. 14, 278 and 335, Sentinel-3B Passes No. 14, 71 and 335, as well as for Jason-3 Passes No. 18 and No. 109 are given. Diverse calibration results by various techniques, infrastructure and settings are presented. Finally, upgrades to the PFAC in support of the Copernicus Sentinel-6 ‘Michael Freilich’, due to launch in November 2020, are summarized.

Monitoring the dynamics and surface conditions of lakes is essential for the understanding of climate change dynamics. Lake water level (LWL) is one of the variables that needs a particular vigilance, requiring a global and consistent monitoring that can be achieved by spaceborne remote sensing. Satellite radar altimetry has been widely used in the monitoring of inland waters in the past decades, with recent great improvements in the spatial resolution through the new generation of synthetic aperture radar (SAR) altimeters. However, current radar altimetry constellations limit the space-time sampling necessary for a systematic and regular mapping of lakes. GNSS-reflectometry (GNSS-R) could provide complementary observations to densify the spatiotemporal coverage, allowing hydrologists to access to finer details on the lake surface evolution. In particular, grazing GNSS-R broadens the use of opportunistic GNSS signals due to the smaller elevation angles of the reflecting signals. In this letter, we address this issue by comparing the altimetry profiles over Great Lakes of grazing GNSS-R data provided by Spire constellation satellites and SAR altimeter data provided by Sentinel-3 (S-3) constellation satellites, as a first approach in preparation of intertechniques hydrology LWL products. This letter confirms the advantages of fusing observations from both types of remote sensing techniques attaining a precision in LWL estimations better than 6 cm, provided that an accurate regional geoid model is available. Furthermore, GNSS-R data could also provide an independent LWL information to validate the radar altimetry measurements over sites, which are not equipped with ground means.

Copernicus Sentinel-3 Surface Topography Mission embarks a two-channel microwave radiometer combined with the altimeter in order to correct the altimeter range for the excess path delay resulting from the presence of water vapour in the troposphere. The in-flight calibration of a single instrument is the critical point to achieve the expected performances. In the context of a constellation, the inter-calibration is even more important. After a presentation of the instrument design, we present the diagnoses used for the calibration of Sentinel-3A, using vicarious calibration over specific areas and double difference methods. The inter-calibration of Sentinel-3B with Sentinel-3A is performed during the tandem phase, using the residual differences of co-located measurements. Finally performances are assessed at crossover points with two parameters, first the wet troposphere correction by comparison with Jason-3; secondly on the Sea Surface Height by difference of variance. Analysis results have shown that Sentinel-3A is well calibrated, consistent with other instruments, and that Sentinel-3B is calibrated within 0.4 K with Sentinel-3A as a reference. Performances and stability fulfill the requirements for both missions.