The polyamide (PA)-12 material used for additive manufacturing was studied in aspects of morphology and their structural properties for basic stages received during 3D laser printing. Samples were real, big-scale production powders. The structure of polymer was evaluated from the crystallinity point of view using XRD, FTIR, and DSC methods and from the surface properties using specific surface evaluation and porosity. Scanning electron microscopy was used to observe morphology of the surface and evaluate the particle size and shape via image analysis. Results were confronted with laser diffraction particles size measurement along with an evaluation of the specific surface area. Fresh PA12 powder was found as inhomogeneous in particle size of material with defective particles, relatively high specific surface, high lamellar crystallite size, and low crystallinity. The scrap PA12 crystallinity was about 2% higher than values for fresh PA12 powder. Particles had a very low, below 1 m²/g, specific surface area; particles sintered as twin particles and often in polyhedral shapes.

The paper presented the findings obtained by industrial research and experimental development on the use of rare earth metals (REMs) in the production of heavy steel ingots and their impact on the internal quality of the 42CrMo4 grade steel forging. REMs alloying was carried out after vacuuming the steel. A relatively large melting loss of cerium (about 50%) and its further decrease in casting due to reoxidation were observed. Refinement of structure and better mechanical properties of forged bar containing about 0.02 wt.% of Ce compared to that of the standard production were not achieved. The wind power shaft with content of about 0.06 wt.% of Ce showed high amount of REM inclusions, which were locally chained, and in some cases, initiated cracks. Four stoichiometrically different types of REM inclusions were detected in forgings, namely (La-Ce)₂O₂S + (La-Ce)O₂ + SiO₂ (minority); oxygen, phosphorus, arsenic, and antimony bound to lanthanum and cerium probably bonded with iron oxides La + Ce, MgO, Al₂O₃ a SiO₂; (La-Ce)₂O₂S, FeO, SiO₂, and CaO or CaS.

Printed circuit boards (PCBs) can be an important source of non-ferrous metals (Al, Sn, Zn, and Ni) and precious metals (Au, Ag, Cu, and Pd). With the continuous increase in demand for metals due to the depletion of ores, recycling of this waste is becoming an attractive alternative. The printed circuits also contain hazardous metals, such as Pb, Hg, As, and Cd. Due to the huge increase in the amount of e-waste, the processing of printed circuit boards for metal recovery and proper handling of hazardous substances has a positive effect on the environment. Pyrometallurgical and hydrometallurgical methods are used for the treatment of this waste. Various oxidizing agents are used in the hydrometallurgical processes, including ozone. PCBs from mobile phones were assessed for the recovery of Cu, Sn, and precious metals. The ground and sieved materials were leached in nitric acid, hydrochloric acid, and sulfuric acid at various process parameters, such as leaching time, leaching agent, and temperature. It was found that the best result was obtained using hydrochloric acid with the addition of ozone at 353 K for a period of 4 h to obtain 68.45 g/dm³ of copper. Preliminary results of electrolysis and cementation are also presented.

In the paper the evaluation of efficiency of the use of machines in the selected production company was presented. The OEE method (Overall Equipment Effectiveness) was used for the analysis. The selected company deals with the production of tapered roller bearings. The analysis of effectiveness was done for 17 automatic grinding lines working in the department of grinding rollers. Low level of efficiency of machines was affected by problems with the availability of machines and devices. The causes of machine downtime on these lines was also analyzed. Three basic causes of downtime were identified: no kanban card, diamonding, no operator. Ways to improve the use of these machines were suggested. The analysis takes into account the actual results from the production process and covers the period of one calendar year.

Customers are more and more deciding to use various types of services via Internet. They make very often different types of purchases. E-commerce is becoming more and more popular and developed. Unfortunately, according to customers, online shopping is not free from problems. Customers are afraid that the ordered goods will not be sent to them, will not meet their expectations, or will be destroyed during transport. An important aspect is also the payment method for this type of shopping. Customers often prefer to pay more to use the option of payment on delivery to avoid losing money if the ordered goods do not be delivered to them. The purpose of the paper is to analyze the safety of services offered via Internet. In the research the customers of different e-shops expressed their opinion on problems that may affect the safety of the offered services. Thanks to the research, it was possible to identify risk areas in accordance with the opinion of customers.