Dorina Simedru

Dr. Dorina Simedru

ICIA Cluj-Napoca, National Institute of Research and Development for Optoelectronics, Măgurele, Ilfov, Romania
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
LSLacrimioara Senila
Lacrimioara Senila
M(Maria-Alexandra Resz (Hoaghia)
Maria-Alexandra Resz (Hoaghia)
AMAna Moldovan
Ana Moldovan
ATAnamaria Iulia Török
Anamaria Iulia Török
Emoke Dalma KovacsEmoke Dalma Kovacs
Emoke Dalma Kovacs
Marin SenilaMarin Senila
Marin Senila
The aim of this study was to investigate the use of natural zeolite as support for microbial community formation during wastewater treatment. Scanning electron microscopy (SEM), thermal decomposition and differential thermogravimetric curves (TGA/DGT) techniques were used for the physicochemical and structural characterization of zeolites. The chemical characterization of wastewater was performed before and after treatment, after 30 days of using stationary zeolite as support. The chemical composition of wastewater was evaluated in terms of the products of nitrification/denitrification processes. The greatest ammonium (NH4+) adsorption was obtained for wastewater contaminated with different concentrations of ammonium, nitrate and nitrite. The wastewater quality index (WWQI) was determined to assess the effluent quality and the efficiency of the treatment plant used, showing a maximum of 71% quality improvement, thus suggesting that the treated wastewater could be discharged into aquatic environments. After 30 days, NH4+ demonstrated a high removal efficiency (higher than 98%), while NO3+ and NO2+ had a removal efficiency of 70% and 54%, respectively. The removal efficiency for metals was observed as follows (%): Mn > Cd > Cr > Zn > Fe > Ni > Co > Cu > Ba > Pb > Sr. Analysis of the microbial diversity in the zeolite samples indicated that the bacteria are formed due to the existence of nutrients in wastewater which favor their formation. In addition, the zeolite was characterized by SEM and the results indicated that the zeolite acts as an adsorbent for the pollutants and, moreover, as a support material for microbial community formation under optimal conditions. Comparing the two studied zeolites, NZ1 (particle size 1–3 mm) was found to be more suitable for wastewater treatment. Overall, the natural zeolite demonstrated high potential for pollutant removal and biomass support for bacteria community growth in wastewater treatment.

14 June 2021 in Materials
Verified
Journal Article
Open access
PDF file
NMNicula Liliana Maria
Nicula Liliana Maria
Ofelia Cornelia CORBUOfelia Cornelia CORBU
Ofelia Cornelia CORBU
Ioan ArdeleanIoan Ardelean
Ioan Ardelean
Andrei Victor SanduAndrei Victor Sandu
Andrei Victor Sandu
MIMihai Iliescu
Mihai Iliescu
Dorina SimedruDorina Simedru
Dorina Simedru
The present work investigates the effect of freeze–thaw cycles on the porosity of three mixtures of road concrete containing blast furnace slag in comparison with two mixtures made with conventional materials. The main technique used in our investigations is nuclear magnetic resonance (NMR) relaxometry. This permitted the extraction of information with respect to the freeze–thaw effect on pore-size distribution, which influences both the mechanical strength and the molecular transport through the material. Moreover, by using this technique, the structure of the air voids was analyzed for the entire pore system in the cement paste and the aggregate particles. The samples under study were first dried in a vacuum oven and then saturated with water or cyclohexane where the distribution of the transverse relaxation times of the protons was recorded. The NMR relaxation measurements were performed on samples extracted from specimens maintained at 300 freeze–thaw cycles and on control samples extracted from specimens kept in water during the freeze–thaw period. Scanning Electron Microscopy (SEM) was used to analyze the microstructure of concrete samples in order to obtain information about the pore sizes and the distance between them. The results from the NMR relaxation measurements were consistent with those obtained by using standard techniques for determining the porosity and the freeze–thaw resistances. The investigations made it possible to establish the optimal composition of blast furnace slag that can be incorporated into road concrete compositions. This non-invasive technique can also complete standard techniques for assessing the porosity and the progress of internal cracks during the freeze–thaw test.

30 July 2019 in Arabian Journal for Science and Engineering
Verified
Journal Article
Closed access
PDF file
RBReka Barabas
Reka Barabas
EÁErick de Souza Ávila
Erick de Souza Ávila
LLLuiz Orlando Ladeira
Luiz Orlando Ladeira
LALoudiana Mosqueira Antônio
Loudiana Mosqueira Antônio
RTRóbert Tötös
Róbert Tötös
Oana CadarOana Cadar
Oana Cadar

2 December 2014 in Notulae Botanicae Horti Agrobotanici Cluj-Napoca
Verified
Journal Article
Open access
DTDoina Adina Todea
Doina Adina Todea
OCOana Cadar
Oana Cadar
Dorina SimedruDorina Simedru
Dorina Simedru
CRCecilia Roman
Cecilia Roman
CTClaudiu Tanaselia
Claudiu Tanaselia
ANAnca Naghiu
Anca Naghiu

Verified
Journal Article
Open access
PDF file
LSLacrimioara Senila
Lacrimioara Senila
Oana CadarOana Cadar
Oana Cadar
EKEniko Kovacs
Eniko Kovacs
GEGal Emese
Gal Emese
MDMonica Dan
Monica Dan
CRCecilia Roman
Cecilia Roman
L-polylactic acid (PLA), a semi–crystalline aliphatic polyester, is one of the most manufactured biodegradable plastics worldwide. The objective of the study was to obtain L-polylactic acid (PLA) from lignocellulosic plum biomass. Initially, the biomass was processed via pressurized hot water pretreatment at a temperature of 180 °C for 30 min at 10 MPa for carbohydrate separation. Cellulase and the beta-glucosidase enzymes were then added, and the mixture was fermented with Lacticaseibacillus rhamnosus ATCC 7469. The resulting lactic acid was concentrated and purified after ammonium sulphate and n-butanol extraction. The productivity of L-lactic acid was 2.04 ± 0.18 g/L/h. Then, the PLA was synthesized in two stages. Firstly, lactic acid was subjected to azeotropic dehydration at 140 °C for 24 h in the presence of xylene, using SnCl2 (0.4 wt.%) as a catalyst, resulting in lactide (CPLA). Secondly, microwave-assisted polymerization was carried out at 140 °C for 30 min with 0.4 wt.% SnCl2. The resulting powder was purified with methanol to produce PLA with 92.1% yield. The obtained PLA was confirmed using electrospray ionization mass spectrometry, nuclear magnetic resonance, thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. Overall, the resulting PLA can successfully replace the traditional synthetic polymers used in the packaging industry.

8 September 2020 in Notulae Botanicae Horti Agrobotanici Cluj-Napoca
Verified
Journal Article
Open access
PDF file
Anca BeczeAnca Becze
Anca Becze
Dorina SimedruDorina Simedru
Dorina Simedru
The purpose of this study is to develop a statistical method, based on Raman spectroscopy results, to quickly identify the adulteration of pumpkin and walnut oils. For this purpose, pure pumpkin and walnut oils from Cluj County, Romania were studied with Raman techniques. They were adulterated with sunflower oil at 14 levels of concentration, ranging from 2.5 to 50%. The areas under the significant peaks were quantified and compared. A statistical method using the partial least square methodology was developed and used as a prediction tool in order to establish the adulteration percentage for pumpkin and walnut oils. 4 components were used to model the equation, the peak areas from ~1264, ~1300, ~1441 and respectively ~1659 cm-1. The final model equations take into account only the peak areas that had a high impact on the prediction values, statistically proven using the p-value. The level of prediction obtained with the final model equation was ≥ 95%.