The aim of this paper is to propose ecological thermal insulation materials that meet the goals of sustainability but also fulfill the imposed thermal performance requirements. This paper studies new composite materials based on sheep wool from the perspective of thermal conductivity. The composites were prepared using two types of binder: acrylic-polyurethane resin and natural rubber latex, which were applied to the wool fibres through different methods and percentages. Based on the obtained results of thermal conductivity, two types of samples were selected for further analysis, which aimed to determine the microstructure, chemical composition, water absorption, attack of microorganisms, water vapour permeability, hygrothermal adsorption characteristics and sound absorption of the samples. In order to analyse the variation of thermal conductivity, the following parameters were taken into account: thickness, density, type of binder and percentage of binder. Following the obtained results, it was observed that the value of the thermal conductivity of the samples varies between 0.0324 and 0.0436 W/mK. It was found that all the samples prepared and analysed in this study fulfil the national criteria for the thermal performance of thermal insulation material. After conducting the in-depth analysis of the two selected sample types, it was concluded that both materials have good sound absorption characteristics over the considered frequency range. In addition, as it was expected from the natural fibres, the samples had low resistance against the attack of microorganisms and water-related tests.

The building industry is known as one of the biggest consumers of natural resources and an important producer of CO₂ emissions. The biggest greenhouse gas emissions are recorded in the production of cement and metallic building materials. The purpose of this paper is to investigate if magnesium oxychloride cement (MOC) can be used as an alternative to the ordinary Portland cement in the mixture of wood–cement composite building materials in order to decrease the negative impact of the construction industry on the environment. The research methodology includes bibliometric literature research, a scientometric analysis and an in-depth discussion. The data used for the research were obtained by interrogating the ISI Web of Science database, selected using the guidelines of the PRISMA method and processed with the help of VOSviewer and Bibliometrix software. The research results indicate an increasing interest in this topic; for example, in the last five years, three times more articles were published on the subject of MOC cement than the number of all articles collected in previous years. Compared to ordinary Portland cement, MOC cement presents a good match with wood, so MOC can be a substitute for ordinary cement to manufacture wood-cement particleboard, especially for the wood species that have high incompatibility with ordinary cement.

The aim of this paper is to propose a novel sandwich panel, which would be suitable for sound absorption and airborne sound insulation, used as applied cladding or independent lightweight partition wall. As far as the authors are concerned, this is the first sheep wool-based sandwich panel using only natural materials. The structure was prepared using hydrated lime-based composite face sheets and a sheep wool-based core. Several parameters of the sandwich panel were determined, including sound absorption coefficient, airborne sound insulation, thermal conductivity, thermal resistance, compressive strength, and bending strength, respectively. The results indicate that the maximum sound absorption value of 0.903 was obtained at the frequency of 524 Hz in the case of the unperforated sample, 0.822 at 536 Hz in the case of the sample with 10% perforations, 0.780 at 3036 Hz in the case of the sample with 20% perforations, and 0.853 at 3200 Hz in the case of the sample with 30% perforations. The registered airborne sound insulation index of the panel was 38 dB. Based on the obtained data, it can be concluded that the studied panel recorded comparable values with other synthetic noise control solutions, which are suitable as applied cladding or an independent lightweight partition wall, with good acoustic properties.

The construction industry’s environmental impact has become a growing concern, largely due to the energy-intensive production of conventional building materials. This paper explores the potential of wood–cement composites as a more sustainable alternative through a comprehensive literature review, including a bibliometric and scientometric analysis of research trends. Our analysis traces the evolution of wood–cement composites from early studies focused on mechanical properties, to recent investigations into their environmental benefits and practical applications. Key findings suggest that optimal performance can be achieved by treating wood with tetraethyl orthosilicate, incorporating additives like cellulose nanocrystals or wollastonite, and using wood from species such as Pinus. While partial cement replacement with wood waste and ash offers significant environmental advantages, precise formulations are needed to maintain structural integrity. This study also acknowledges certain methodological limitations, such as the reliance on keyword-based filtering, which may have excluded some relevant studies. Future research should address long-term durability, economic feasibility, and standardized testing methodologies to facilitate the adoption of wood–cement composites in the construction industry. These materials, particularly suitable for non-structural applications and insulation, hold promise as viable, eco-friendly building solutions capable of reducing the construction industry’s carbon footprint.

To date, the scientific research in the field of recycling of construction and demolition wastes was focused on the production of concrete, cements, and bricks. The attainment of these products was limited to the addition of suitable binder contents, such as lime or cement, compaction, and possibly heat treatment, without a concrete recycling method. In this paper, new cement materials consisting of 2.5 weight% composite and originating from construction and demolition waste powder, were prepared and investigated in view of applications in the construction industry as a substituent of cement. The materials with recycled powder from construction and demolition wastes were characterized by X-ray diffraction (XRD), infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy. The XRD data indicate vitroceramic structures with varied crystalline phases. The NMR relaxometry data show four reservoirs of water associated with bounded water and with three types of pores in the composite construction material. The micro-Vickers hardness was measured to reflect the influence of composite nature in the local mechanical properties of the composite-cement for the mixture with Portland cement and (EC) expired cement.