Enrico Campari

Prof. Enrico Campari

Physics and Astronomy Departement of Bologna University, Bologna Italy
orcid

Research Focus & Metrics

Academic Career Length

33Years (1994-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 October 2019 in Sensors
Verified
Journal Article
Open access
PDF file
LPLuca Possanzini
Luca Possanzini
MTMARTA TESSAROLO
MARTA TESSAROLO
LMLaura Mazzocchetti
Laura Mazzocchetti
Enrico CampariEnrico Campari
Enrico Campari
BFBeatrice Fraboni
Beatrice Fraboni
In recent years, wearable technologies have attracted great attention in physical and chemical sensing applications. Wearable pressure sensors with high sensitivity in low pressure range (<10 kPa) allow touch detection for human-computer interaction and the development of artificial hands for handling objects. Conversely, pressure sensors that perform in a high pressure range (up to 100 kPa), can be used to monitor the foot pressure distribution, the hand stress during movements of heavy weights or to evaluate the cyclist’s pressure pattern on a bicycle saddle. Recently, we developed a fully textile pressure sensor based on a conductive polymer, with simple fabrication and scalable features. In this paper, we intend to provide an extensive description on how the mechanical properties of several fabrics and different piezoresistive ink formulation may have an impact in the sensor’s response during a dynamic operation mode. These results highlight the complexity of the system due to the presence of various parameters such as the fabric used, the conductive polymer solution, the operation mode and the desired pressure range. Furthermore, this work can lead to a protocol for new improvements and optimizations useful for adapting textile pressure sensors to a large variety of applications.

1 January 2021 in The Physics Teacher
Verified
Journal Article
Open access
PDF file
Enrico CampariEnrico Campari
Enrico Campari
MBManuel Barbetta
Manuel Barbetta
SBSylvie Braibant
Sylvie Braibant
NCNitya Cuzzuol
Nitya Cuzzuol
AGAlessandro Gesuato
Alessandro Gesuato
CVCristian Vignali
Cristian Vignali
The pandemic triggered by the SARS-CoV-2 virus has produced worldwide interruptions of face-to-face teaching activity in both schools and universities. In Italy, the quarantine began in the second half of February 2020 and lasted for all the second semester of lectures. The University of Bologna, where all the authors of the present article are based, developed and activated several interfaces necessary to efficiently deliver online teaching courses with the utmost speed. The framework used by the authors is based on a common platform, Microsoft TEAMS, available to all teachers at Bologna University.

12 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
Enrico CampariEnrico Campari
Enrico Campari
ACAngelo Casagrande
Angelo Casagrande
Elena ColombiniElena Colombini
Elena Colombini
MGMagdalena Lassinantti Gualtieri
Magdalena Lassinantti Gualtieri
PVPaolo Veronesi
Paolo Veronesi
The effect of Zr addition on the melting temperature of the CoCrFeMnNi High Entropy Alloy (HEA), known as the “Cantor’s Alloy”, is investigated, together with its micro-structure, mechanical properties and thermomechanical recrystallization process. The base and Zr-modified alloys are obtained by vacuum induction melting of mechanically pre-alloyed powders. Raw materials are then cold rolled and annealed. recrystallization occurred during the heat treatment of the cold-rolled HEA. The alloys are characterized by X-ray diffraction, electron microscopy, thermal analyses, mechanical spectroscopy and indentation measures. The main advantages of Zr addition are: (1) a fast vacuum induction melting process; (2) the lower melting temperature, due to Zr eutectics formation with all the Cantor’s alloy elements; (3) the good chemical alloy homogeneity; and (4) the mechanical properties improvement of re-crystallized grains with a coherent structure. The crystallographic lattice of both alloys results in FCC. The Zr-modified HEA presents a higher recrystallization temperature and smaller grain size after recrystallization with respect to the Cantor’s alloy, with precipitation of a coherent second phase, which enhances the alloy hardness and strength.

20 March 2024 in Materials
Verified
Journal Article
Open access
PDF file
NGNiccolò Giani
Niccolò Giani
Emanuele MaccaferriEmanuele Maccaferri
Emanuele Maccaferri
TBTiziana Benelli
Tiziana Benelli
MARCO BOVOMARCO BOVO
MARCO BOVO
Daniele TorreggianiDaniele Torreggiani
Daniele Torreggiani
LMLaura Mazzocchetti
Laura Mazzocchetti
The use of wheat middlings (WM) and rice husks (RH) as biofillers for mixing with poly(lactic acid) (PLA) matrix to produce new 3D-printable biocomposites was assessed. Filaments containing 10 and 20 wt.% agro-waste-derived biofillers were manufactured and, for the sake of comparison, filaments of neat PLA were also produced. The obtained filaments were characterized via thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), showing potential for further application in additive manufacturing processing. Three-dimensionally printed specimens were thus produced and characterized via: DSC, also evaluating the specific heat capacity (CP) of specific 3D-printed specimens; dynamic mechanical analysis (DMA), also applied for determining the coefficient of linear thermal expansion (CLTE) measured on 3D-printed specimens in two different directions (X and Y); and tensile tests. The latter testing campaign was carried out along three printing directions (X, Y, and Z axes) to test the intrinsic biocomposite features (X-printed samples) as well as interbead and interlayer adhesion (Y- and Z-printed specimens, respectively). All samples demonstrated acceptable properties. The inclusion of a cost-free natural material leads to a strong reduction of the whole material cost. Implementing this new class of composite material to an additive manufacturing technique can significantly reduce the environmental impact of 3D-printed products.

1 September 2001 in Physical Review D
Verified
Journal Article
Closed access
PBP. Baldi
P. Baldi
Enrico CampariEnrico Campari
Enrico Campari
Giuseppe CasulaGiuseppe Casula
Giuseppe Casula
SFSergio Focardi
Sergio Focardi
FPFederico Palmonari
Federico Palmonari

12 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
Enrico CampariEnrico Campari
Enrico Campari
ACAngelo Casagrande
Angelo Casagrande
The high entropy alloy (HEA) of equiatomic composition CrNiFeCoMn and with FCC crystal structure was additively manufactured in a selective laser melting (SLM) process starting from mechanically alloyed powders. The as-produced alloy shows fine nitride and σ phase precipitates, which are Cr-rich and stable up to about 900 K. The precipitates increase in number and dimensions after long-period annealing at 900–1300 K, with a change in the HEA mechanical properties. Higher aging temperatures in the furnace, above 1300 K, turn the alloy into a single FCC structure, with the disappearance of the nitride and σ phase precipitates inside the grains and at the grain boundaries, but still with the presence of a finer Cr-rich nitride precipitation phase. These results suggest that the as-produced HEA is a supersaturated solid solution at low and intermediate temperature with nitrides and σ nanostructures.