The utilization of synthetic, natural, and waste fibers in asphalt mixtures is constantly increasing due to the capability of fibers to improve the mechanical performance of asphalt mixes. The combination of fibers in asphalt mixes contributes to ecological sustainability and cost benefits. The objective of this paper is to introduce a citation-based review on the incorporation of synthetic, natural, and waste fibers in bitumen, dense-graded asphalt mix, stone mastic asphalt, and porous asphalt mix. Additionally, this article aims to identify research gaps and provide recommendations for further work. The outputs of this article demonstrated that there has recently been a growing interest in the use of natural and waste fibers in asphalt mixtures. However, more future studies are needed to investigate the performance of fiber-modified stone mastic asphalt and porous asphalt mix in terms of resistance to aging and low-temperature cracking. Furthermore, the period of natural fibers’ biodegradability in asphalt mixtures should be investigated.

The growing consumption of natural resources to meet the needs of road construction has become a significant challenge to environmental sustainability. Additionally, the increase in industrial by-products has raised global concerns due to their environmental impacts. The utilization of industrial by-products in asphalt mixtures offers an effective solution for promoting sustainable practices. The objective of this article is to conduct a bibliometric analysis and citation-based review to characterize and analyze the scientific literature on the use of steel slag aggregates, copper slag, phosphorus slag, bottom ash, fly ash, red mud, silica fume, and foundry sand in asphalt mixtures. Another aim is to identify research gaps and propose recommendations for future studies. The bibliometric analysis was conducted using VOSviewer software version 1.6.18, focusing on authors, co-authorship, bibliographic coupling, and countries. A total of 909 articles were selected for the bibliometric analysis. The findings indicate that more effort is needed to expand the application of industrial by-products in asphalt mixtures. Furthermore, these by-products should be utilized in different types of asphalt mixtures. The incorporation of industrial by-products into asphalt mixes also requires field validation and further laboratory investigations, particularly concerning aging and moisture resistance. In addition, the effects of chemical reactions involving industrial by-products on the long-term performance of asphalt layers should be evaluated. Finally, this article encourages engineers and researchers to intensify their efforts in utilizing industrial by-products for environmental sustainability.

The addition of polymer to a base binder has been documented as a successful approach in terms of improving physical and rheological properties of the base bitumen. However, the main drawbacks of polymer-modified bitumen are incompatibility and degradation of polymer due to aging. This article aims to introduce a bibliometric analysis and review on modifying bitumen with polymers. Additionally, this article intent to highlight the significant gaps and recommendations for future work. Furthermore, another objective of this article is to provide a worth attempt regrading reducing the negative impact of polymer’s drawbacks on the performance of polymer-modified base binder. The findings of this article demonstrated that the test of storage stability for polymer-amended bitumen should be modified, in which the softening point of aluminum tube centerpiece should be measured to introduce a better evaluation for the storage stability of polymer-amended bitumen. In addition, the effects of kinetic factors (mixing sequence, viscosity of blend, shear rate, and time of mixing) on the compatibility of polymer-amended bitumen should be investigated. Moreover, the addition of compatibilizers and stabilizers to polymer-modified binder is recommended to improve compatibility and reduce the effect of aging on degradation of polymer.

The long-term aging of the asphalt mixtures has become a major concern because it decreases the lifespan of the asphalt layer. In this study, the asphalt mixtures incorporating steel slag aggregates were reinforced with synthetic fibers as a novel contribution in terms of decreasing the effect of aging on the performance of the asphalt mixtures. However, different mixtures—namely, Mix0, Mix1, and Mix2—were subjected to long-term oven aging to study the effect of the aging on the performance of the asphalt mixes. Mix0 consisted of coarse and fine granite aggregates, while Mix1 was composed of coarse steel slag aggregate and fine granite aggregate. Mix2 represents the reinforced asphalt mixtures incorporating coarse steel slag aggregate and reinforced with the synthetic fibers of polyvinyl alcohol, acrylic, and polyester at the proportion of 0.3% by weight of the aggregates. The conducted performance tests were resilient modulus, rutting depth, and cracking resistance. The outputs of the performance tests for the unaged asphalt mixes displayed that the mixtures incorporating coarse steel slag aggregate exhibited better performance than the mixtures containing granite aggregate. Meanwhile, the reinforced asphalt mixtures have shown a lower resilient modulus and a higher permanent deformation than the unreinforced asphalt mixes due to the elastic behavior. Otherwise, the reinforced asphalt mixtures have shown superior resistance to cracking in comparison to the unreinforced mixtures. On the other hand, the performance of the aged asphalt mixtures demonstrated that the mixtures containing granite aggregates exhibited a lower susceptibility to aging than the mixtures incorporating steel slag aggregate. Meanwhile, the performance of the aged reinforced asphalt mixtures showed that introducing synthetic fibers has decreased the effect of the long-term oven aging.

The major goal of sustainable practices is to preserve raw resources through the utilization of waste materials as an alternative to natural resources. Decreasing the temperature required to produce asphalt mixes contributes to environmental sustainability by reducing energy consumption and toxic emissions. In this study, warm mix asphalt incorporating coarse steel slag aggregates was investigated. Warm mix asphalt was produced at different temperatures lower than the control asphalt mixes (hot mix asphalt) by 10, 20, and 30 °C. The performances of the control and warm mix asphalt were assessed through laboratory tests examining stiffness modulus, dynamic creep, and moisture sensitivity. Furthermore, a response surface methodology (RSM) was conducted by means of DESIGN EXPERT 11 to develop prediction models for the performance of warm mix asphalt. The findings of this study illustrate that producing warm mix asphalt at a temperature 10 °C lower than that of hot mix asphalt exhibited the best results, compared to the other mixes. Additionally, the warm mix asphalt produced at 30 °C lower than the hot mix asphalt exhibited comparable performance to the hot mix asphalt. However, as the production temperature increases, the performance of the warm mix asphalt improves.