This paper presents the results of experimental investigations on sand–rubber tire shred mixtures. The sand and rubber tire shreds considered were of uniform fine size ( ). Static and dynamic characterization was carried out for pure sand, pure rubber, and sand–rubber tire shred mixtures with rubber content varying 10, 30, and 50% by weight. First, strain-controlled consolidated undrained triaxial tests were carried out to determine static shear strength. Strain-controlled cyclic triaxial tests were then conducted to evaluate shear moduli and damping ratios in the medium to large strain range. Undrained moduli obtained from both experiments were compared. It was found that the mixture with 10% rubber content had the satisfactory static and dynamic properties required for seismic isolation of low-rise buildings.
19 January 2019 in Geotechnical and Geological Engineering
This study deals with the determination of the engineering properties of sand–rubber tire shred mixtures. The rubber tire shreds of fine size are mixed with river sand in various controlled proportions and tested under dense, fully saturated conditions. The monotonic direct shear tests, one-dimensional compression, and the permeability tests are conducted on these mixtures to determine their shear behaviour, compressibility, and drainage characteristics. The increase in rubber content results in the reduction of shear strength, constrained modulus and the increase of compressibility of the mixtures. The brittleness index which is a measure of ductility and the energy absorption capacity is also discussed. Intriguingly, the permeability of the mixtures reduces with the increase in rubber content. The contact angles of sand-water and the rubber–water interfaces determined using Goniometer explains this behaviour.
The growing consumption of natural resources to meet the needs of road construction has become a significant challenge to environmental sustainability. Additionally, the increase in industrial by-products has raised global concerns due to their environmental impacts. The utilization of industrial by-products in asphalt mixtures offers an effective solution for promoting sustainable practices. The objective of this article is to conduct a bibliometric analysis and citation-based review to characterize and analyze the scientific literature on the use of steel slag aggregates, copper slag, phosphorus slag, bottom ash, fly ash, red mud, silica fume, and foundry sand in asphalt mixtures. Another aim is to identify research gaps and propose recommendations for future studies. The bibliometric analysis was conducted using VOSviewer software version 1.6.18, focusing on authors, co-authorship, bibliographic coupling, and countries. A total of 909 articles were selected for the bibliometric analysis. The findings indicate that more effort is needed to expand the application of industrial by-products in asphalt mixtures. Furthermore, these by-products should be utilized in different types of asphalt mixtures. The incorporation of industrial by-products into asphalt mixes also requires field validation and further laboratory investigations, particularly concerning aging and moisture resistance. In addition, the effects of chemical reactions involving industrial by-products on the long-term performance of asphalt layers should be evaluated. Finally, this article encourages engineers and researchers to intensify their efforts in utilizing industrial by-products for environmental sustainability.
Biomass valorization and biofuel production are essential strategies for converting renewable organic materials into sustainable energy, addressing the urgent need for alternatives to fossil fuels. This study conducts a bibliometric analysis of 1657 publications from the Scopus database, covering the period from 2010 to December 2024, revealing significant trends in this field. The number of published articles reached 318 in 2024, peaking at 163 articles in 2020, which garnered 7302 citations, indicating robust global interest. China leads the research landscape with 550 publications and 17,577 citations, followed by the United States with 160 publications and 9359 citations. Key journals include “ACS Sustainable Chemistry and Engineering” and “Chemsuschem”, highlighting important contributions to the field. The analysis identifies four clusters: the role of lignin and heterogeneous catalysis in biomass conversion; pyrolysis and waste valorization techniques; key chemical intermediates from biomass; and advanced reactions like hydrogenolysis for enhancing product value. The study emphasizes the need for innovative strategies and interdisciplinary collaboration to improve biomass utilization and biofuel production. Future research should focus on developing integrated systems that promote a circular economy, optimize reaction conditions, and explore new biomass feedstocks. Overall, this research significantly advances the understanding of biomass conversion processes and supports the transition to renewable energy solutions, underscoring the critical role of biomass in achieving sustainability goals.
The indiscriminate disposal of empty aluminum beverage cans poses a major environmental pollution problem. The last decade has witnessed coordinated research targeted at finding cost-effective and practical solutions to minimize and utilize solid waste, which has become a major global environmental concern. This research is focused on the use of readily available waste aluminum (Al) cans for the synthesis of gamma-alumina. This work aims to synthesize γ-alumina from scrap Al cans using the sol-gel method, as well as their characterization. This study further explores the impact of reaction temperature on alumina synthesis at a fixed aging time of a half day. Characterization of γ-alumina was performed via FTIR, XRD, BET, and SEM–EDX analyses. The experimental results revealed the possibility of γ-alumina synthesis from waste Al cans, which can serve as catalysts/supports for various processes. A reaction temperature of 70 °C was found to be optimal for alumina synthesis from Al waste, as evidenced by our FTIR and XRD results, whereas alumina at room temperature recorded the highest surface area, at around 139 m2/g. Also, the results show that all the alumina synthesized at 70 °C recorded the highest weight and atomic percentage, at 9%, 8%, 27%, and 22%.