Carbohydrates are important compounds in natural products where they primarily serve as a source of energy, but they have important secondary roles as precursors of aroma or bioactive compounds. They are present in fresh and dried (cured) tobacco leaves as well. The sugar content of tobacco depends on the tobacco variety, harvesting, and primarily on the curing conditions (temperature, time and moisture). If the process of curing employs high temperatures (flue-curing and sun-curing), final sugar content is high. In contrast, when air curing has a lower temperature, at the end of the process, sugar level is low. Beside simple sugars, other carbohydrates reported in tobacco are oligosaccharides, cellulose, starch, and pectin. Degradation of polysaccharides results in a higher yield of simple sugars, but at the same time reduces sugars oxidization and transfer into carbon dioxide and water. Loss of sugar producers will compensate with added sugars, to cover undesirable aroma properties and achieve a better, pleasant taste during smoking. However, tobacco carbohydrates can be precursors for many harmful compounds, including formaldehyde and 5-hydroxymethylfurfural. Keeping in mind that added sugars in tobacco production are unavoidable, it is important to understand all changes in carbohydrates from harvesting to consuming in order to achieve better product properties and avoid the formation of harmful compounds. This review summarizes current knowledge about tobacco carbohydrates, including changes during processing with special focus on carbohydrates as precursors of harmful compounds during smoking.

This is the first study on ultrasound-assisted extraction (UAE) of bioactive compounds from different types of tobacco industry wastes (scrap, dust, and midrib). The obtained results were compared with starting raw material (tobacco leaves) to see the changes in bioactive compounds during tobacco processing. Results suggested that tobacco waste extracts possess antioxidant activity and considerable amounts of targeted bioactive compounds (phenolics and solanesol). The content of chlorogenic acid varied between 3.64 and 804.2 μg/mL, caffeic acid between 2.34 and 10.8 μg/mL, rutin between 11.56 and 93.7 μg/mL, and solanesol between 294.9 and 598.9 μg/mL for waste and leaf extracts, respectively. There were noticeable differences between bioactive compounds content and antioxidant activity in extracts related to applied UAE conditions and the used type of tobacco waste. Results show that optimal UAE parameters obtained by response surface methodology (RSM) were different for each type of material, so process optimization proved to be necessary. Considering that tobacco waste is mostly discarded or not effectively utilized, the results clearly show that tobacco waste could be used as a potential source of some bioactive compounds.

With globalization, growing popularization and changes in dietary habits where more processed food is consumed, a generation of food wastes and by-products has increased. Under-exploitation of by-products and waste leads to finance losses and environmental pollution although most of the waste are a rich source of bioactive compounds. Using spray drying process, extracted bioactive compounds from food wastes and by-products can be transferred into powder form, and returned to the food chain. Spray drying technique showed to be the most convenient, energy efficient and time-saving process, where a liquid is directly transformed into stable powder, which can be stored for a prolonged time or easily incorporated into other products. This review article focuses on the application of processing parameters of spray drying with specific emphasis on the production of dry extracts of food waste and their influence on powder properties. Research gaps and challenges along with possible applications are also discussed.

The content of bioactive compounds in four brown and one red algae from the Adriatic Sea (Dictyota dichotoma, Gongolaria barbata, Ericaria amentacea, Sargassum hornschuchii and Ellisolandia elongata) is explored. The efficiency of two different extraction methods viz. ultrasound-assisted extraction (UAE) and matrix solid-phase dispersion (MSPD) to obtain the extracts rich in phenolic compounds was compared. The effect of the extraction solvent to modulate the phenolic profile was assessed. In general, the mixture ethanol/water in an isovolumetric proportion showed the best results. The total phenolic content (TPC) and antioxidant activity (AA), as well as the individual polyphenolic profile, were evaluated for five target algae. TPC values ranged between 0.2 mg GAE/g (for E. elongata) and 38 mg GAE/g (for S. hornschuchii). Regarding the quantification of individual polyphenols by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis, the presence of a high number of hydroxybenzoic acid derivatives (mainly of 3- and 4-hydroxybenzoic acids) in all species was noted. In G. barbata their concentrations reached up to 500 mg/kg. IC₅₀ values (ABTS assay) ranged between 44 mg/L (for S. hornschuchii) and 11,040 mg/L (for E. elongata). This work contributes to the in-depth characterization of these little-explored algae, showing their potential as a natural source of phenolic compounds.

This study aimed to investigate the effect of four green extraction techniques (ultrasound-assisted extraction, UAE; supercritical fluid extraction, SFE; subcritical water extraction, SWE; and extraction using deep eutectic solvents, DES) on the extraction of targeted flavonoids from edible feijoa flowers. The bioactive components in the obtained extracts were quantified by High-Performance Liquid Chromatography—Photodiode Array Detector (HPLC-PDA). Moreover, total polyphenol content and antioxidant activity by DPPH^•, ABTS^•+, FRAP, and CUPRAC assays were investigated. UAE generally gave the highest yields for isoquercitrin and quercetin content (18.36–25.33 and 10.86–16.13 µg/g), while DES extraction with choline chloride:lactic acid (1:2) and H₂O content of 50% gave the highest yield of chrysanthemin (90.81 µg/g). The highest yield of flavone (12.69 mg/g) was obtained with supercritical CO₂ at 300 bar. Finally, UAE gave the highest total polyphenol content (ca. 64 mg GAE/g) and antioxidant activity at 70 °C during 30 min with 40% (0.84 mmol TEAC/g and 2.25 mmol Fe²⁺/g, for ABTS^•+ and CUPRAC, respectively) and 60% ethanol-water solution (0.49 mmol TEAC/g and 2.09 mmol Fe²⁺/g, for DPPH^• and FRAP, respectively). The eco-friendly extraction techniques resulted in selective methods capable of extracting targeted bioactive compounds from edible feijoa flowers.