Giuseppe Catania

Prof. Dr. Giuseppe Catania


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 February 2018 in Coatings
Verified
Journal Article
Open access
PDF file
GCGiuseppe Catania
Giuseppe Catania
Matteo StrozziMatteo Strozzi
Matteo Strozzi
The damping behaviour of multi-layer composite mechanical components, shown by recent research and application papers, is analyzed. A local dissipation mechanism, acting at the interface between any two different layers of the composite component, is taken into account, and a beam model, to be used for validating the known experimental results, is proposed. Multi-layer prismatic beams, consisting of a metal substrate and of some thin coated layers exhibiting variable stiffness and adherence properties, are considered in order to make it possible to study and validate this assumption. A dynamical model, based on a simple beam geometry but taking into account the previously introduced local dissipation mechanism and distributed visco-elastic constraints, is proposed. Some different application examples of specific multi-layer beams are considered, and some numerical examples concerning the beam free and forced response are described. The influence of the multilayer system parameters on the damping behaviour of the free and forced response of the composite beam is investigated by means of the definition of some damping estimators. Some effective multi-coating configurations, giving a relevant increase of the damping estimators of the coated structure with respect to the same uncoated structure, are obtained from the model simulation, and the results are critically discussed.

31 January 2018 in Coatings
Verified
Journal Article
Open access
PDF file
SAStefano Amadori
Stefano Amadori
GCGiuseppe Catania
Giuseppe Catania
ACAngelo Casagrande
Angelo Casagrande
In this work, the dissipative properties of different coating solutions are compared and a beam mechanical model, taking into account of dissipative actions at the interface between different layers is proposed. The aim is to find optimal coatings to be employed in the production of composites with high damping properties. The investigated coating layers are obtained from different materials and production processes, and are applied on different metallic substrates. The composite specimens, in the form of slender beams, are tested by means of forced excitation dynamic measurements. Force and displacement experimental data, in a wide range of excitation frequencies, are used to estimate the system damping properties. Homogeneous, uncoated specimens are also tested for comparison. A specific identification procedure is used to identify the specimens stress-strain relationship in the frequency domain. The ratio of the imaginary part and the modulus of the specimen estimated complex frequency response function is considered as a measurement of the damping behaviour. A modified third order multi layered beam model, based on the zig-zag beam theory, is proposed. The model takes into account the contribution to the damping behaviour of the frictional actions and slipping at the interface between layers. Frictional actions are modelled by means of a complex, elasto-hysteretic contribution.

17 September 2020 in Coatings
Verified
Journal Article
Open access
PDF file
EBEnnio Bonetti
Ennio Bonetti
Enrico CampariEnrico Campari
Enrico Campari
ACAngelo Casagrande
Angelo Casagrande
GCGiuseppe Catania
Giuseppe Catania
AGAndrea Garzoni
Andrea Garzoni
Several coating configurations on AISI 316 steel were obtained by a hot dipping process followed by isothermal interdiffusion. Six different kind of multilayered specimens were produced and characterized. These coatings, typically employed as bond coat in thermal barrier coating (TBC), can also be effective as vibration reduction elements at intermediate and high temperatures. This preliminary work was focused on the microstructural design and processing effects of the coatings. The damping of the produced specimens was measured up to 450 °C and compared with that of the steel substrate. The most performing coatings contain an Al-Si layer and exhibit a steep damping increase above 200 °C, reasonably due to dislocation movements by plastic straining of soft alloy layer and to the interface sliding between layers with different elastic moduli.

22 March 2025 in Sensors
Verified
Journal Article
Open access
PDF file
GCGiuseppe Catania
Giuseppe Catania
SAStefano Amadori
Stefano Amadori
A signal processing-based procedure is proposed for calibrating an experimental sensor-based test system used to identify material model parameters. A standard dynamic mechanical analyzer (DMA) sensorized test apparatus is considered, enabling the measurement of dynamic excitation and displacement response in a specimen under flexural conditions. To account for the dynamic contributions of the system frame and fixtures to the measured response, a novel calibration procedure is introduced, mainly differing from the techniques used in standard test applications. A multi-degree-of-freedom dynamic model of the instrument frame, coupled with the beam specimen under test, is considered, and a frame identification procedure is described. The proposed procedure requires measurements from at least three beam specimens made of a known material but with different geometries. It is shown that an accurate frame model can be identified using an algebraic numerical technique. It is shown that the accuracy of the material model identification can be improved by applying the proposed calibration technique. Some experimental application examples are presented and discussed.

1 December 2023 in Rheologica Acta
Verified
Journal Article
Open access
PDF file
SAStefano Amadori
Stefano Amadori
GCGiuseppe Catania
Giuseppe Catania
A multi-step, iterative technique for the local non-parametric identification of the standard linear solid (SLS) material model employing fractional order time differential operators is presented. Test input data consists of a set of identified material complex modulus values estimated at different frequency values, obtained from input–output experimental measurements made on a material specimen by means of forced harmonic excitation and from experimental measurements made on the same specimen in quasi-static relaxation conditions. The proposed technique is mainly based on an algebraic procedure leading to the solution of an overdetermined system of linear equations, in order to get the optimal value of the model unknown parameters. The procedure is non-parametric, since the SLS model order is initially unknown. The optimal model size can be found by evaluating the stability properties of the solution associated to any model size and by automatically discarding computational, non-physical contributions. The identification procedure is first validated by means of numerically simulated test data from within known model examples, and then it is applied to some experimentally obtained test data associated to different materials.

29 July 2020 in Preprints.org
Verified
Preprint
Open access
PDF file
EBEnnio Bonetti
Ennio Bonetti
Enrico CampariEnrico Campari
Enrico Campari
ACAngelo Casagrande
Angelo Casagrande
GCGiuseppe Catania
Giuseppe Catania
AGAndrea Garzoni
Andrea Garzoni
Several coatings configurations of combined aluminizing and diffusion layered aluminide on 316 steel were produced and characterized. These coatings, typically employed as thermal barrier coating (TBC), can also be effective as vibration reduction elements at intermediate and high temperatures. This preliminary work has been focused on the microstructural design and processing effects of the coatings. The damping of the produced specimens was measured up to 450°C and compared with that of the steel substrate. The most performing coatings contain an Al-Si layer and exhibit a steep damping increase above 200 °C, reasonably due to dislocation movements by plastic straining of soft alloy layer and to the interface sliding between layers with different elastic moduli.