Low earth orbit (LEO) satellite communications are expected to be incorporated in future wireless networks, in particular 5G and beyond networks, to provide global wireless access with enhanced data rates. Massive multiple-input multipleoutput (MIMO) techniques, though widely used in terrestrial communication systems, have not been applied to LEO satellite communication systems. In this paper, we propose a massive MIMO transmission scheme with full frequency reuse (FFR) for LEO satellite communication systems and exploit statistical channel state information (sCSI) to address the difficulty of obtaining instantaneous CSI (iCSI) at the transmitter. We first establish the massive MIMO channel model for LEO satellite communications and simplify the transmission designs via performing Doppler and delay compensations at user terminals (UTs). Then, we develop the low-complexity sCSI based downlink (DL) precoder and uplink (UL) receiver in closed-form, aiming to maximize the average signal-to-leakage-plus-noise ratio (ASLNR) and the average signal-to-interference-plus-noise ratio (ASINR), respectively. It is shown that the DL ASLNRs and UL ASINRs of all UTs reach their upper bounds under some channel condition. Motivated by this, we propose a space angle based user grouping (SAUG) algorithm to schedule the served UTs into different groups, where each group of UTs use the same time and frequency resource. The proposed algorithm is asymptotically optimal in the sense that the lower and upper bounds of the achievable rate coincide when the number of satellite antennas or UT groups is sufficiently large. Numerical results demonstrate that the proposed massive MIMO transmission scheme with FFR significantly enhances the data rate of LEO satellite communication systems. Notably, the proposed sCSI based precoder and receiver achieve the similar performance with the iCSI based ones that are often infeasible in practice.

In this paper, we propose a downlink multiple-input single-output (MISO) transmission scheme, which is assisted by an intelligent reflecting surface (IRS) consisting of a large number of passive reflecting elements. In the literature, it has been proved that nonorthogonal multiple access (NOMA) can achieve the same performance as computationally complex dirty paper coding, where the quasi-degradation condition is satisfied, conditioned on the users’ channels fall in the quasi-degradation region. However, in a conventional communication scenario, it is difficult to guarantee the quasi-degradation, because the channels are determined by the propagation environments and cannot be reconfigured. To overcome this difficulty, we focus on an IRS-assisted MISO NOMA system, where the wireless channels can be effectively tuned. We optimize the beamforming vectors and the IRS phase shift matrix for minimizing transmission power. Furthermore, we propose an improved quasi-degradation condition by using IRS, which can ensure that NOMA achieves the capacity region with high possibility. For a comparison, we study zero-forcing beamforming (ZFBF) as well, where the beamforming vectors and the IRS phase shift matrix are also jointly optimized. Comparing NOMA with ZFBF, it is shown that, with the same IRS phase shift matrix and the improved quasi-degradation condition, NOMA always outperforms ZFBF. At the same time, we identify the condition under which ZFBF outperforms NOMA, which motivates the proposed hybrid NOMA transmission. Simulation results show that the proposed IRS-assisted MISO system outperforms the MISO case without IRS, and the hybrid NOMA transmission scheme always achieves better performance than orthogonal multiple access.

This paper investigates the downlink (DL) transmit design for massive multiple-input multiple-output (MIMO) low-earth-orbit (LEO) satellite communication systems, where only the slow-varying statistical channel state information is exploited at the transmitter. The channel model for the DL massive MIMO LEO satellite system is established, in which both the satellite and the user terminals (UTs) are equipped with uniform planar arrays. Observing the rank-one property of the channel matrices, we show that the single-stream precoding for each UT is the optimal choice that maximizes the ergodic sum rate. This favorable result simplifies the complicated design of transmit covariance matrices into that of precoding vectors without any loss of optimality. Then, an efficient algorithm is devised to compute the precoding vectors. Furthermore, we formulate an approximate transmit design based on the upper bound on the ergodic sum rate, for which the optimality of single-stream precoding still holds. We show that, in this case, the design of precoding vectors can be simplified into that of scalar variables, for which an effective algorithm is developed. In addition, a low-complexity learning framework is proposed for optimizing the scalar variables. Simulation results demonstrate that the proposed approaches can achieve significant performance gains over the existing schemes.

In recent years, with the rapid enhancement of computing power, deep learning methods have been widely applied in wireless networks and achieved impressive performance. To effectively exploit the information of graph-structured data as well as contextual information, graph neural networks (GNNs) have been introduced to address a series of optimization problems of wireless networks. In this overview, we first illustrate the construction method of wireless communication graph for various wireless networks and simply introduce the progress of several classical paradigms of GNNs. Then, several applications of GNNs in wireless networks such as resource allocation and several emerging fields, are discussed in detail. Finally, some research trends about the applications of GNNs in wireless communication systems are discussed.

The relentless growth of wireless applications and data traffic continues to accentuate the long felt need for decentralized, self-managed, and cooperative network architectures. Enlightened by the power of blockchain technology, we propose a blockchain radio access network (B-RAN) architecture and develop decentralized, secure, and efficient mechanisms to manage network access and authentication among inherently trustless network entities. We further identify promising advanced functions made possible by adopting blockchain for open radio access networks. Our test results demonstrate the benefits of the B-RAN architecture. We also present a number of challenges and future research directions.

With the deployment of fifth-generation (5G) wireless networks worldwide, research on sixth-generation (6G) wireless communications has commenced. It is expected that 6G networks can accommodate numerous heterogeneous devices and infrastructures with enhanced efficiency and security over diverse, e.g. spectrum, computing and storage, resources. However, this goal is impeded by a number of trust-related issues that are often neglected in network designs. Blockchain, as an innovative and revolutionary technology that has arisen in the recent decade, provides a promising solution. Building on its nature of decentralization, transparency, anonymity, immutability, traceability and resiliency, blockchain can establish cooperative trust among separate network entities and facilitate, e.g. efficient resource sharing, trusted data interaction, secure access control, privacy protection, and tracing, certification and supervision functionalities for wireless networks, thus presenting a new paradigm towards 6G. This paper is dedicated to blockchain-enabled wireless communication technologies. We first provide a brief introduction to the fundamentals of blockchain, and then we conduct a comprehensive investigation of the most recent efforts in incorporating blockchain into wireless communications from several aspects. Importantly, we further propose a unified framework of the blockchain radio access network (B-RAN) as a trustworthy and secure paradigm for 6G networking by utilizing blockchain technologies with enhanced efficiency and security. The critical elements of B-RAN, such as consensus mechanisms, smart contract, trustworthy access, mathematical modeling, cross-network sharing, data tracking and auditing and intelligent networking, are elaborated. We also provide the prototype design of B-RAN along with the latest experimental results.