In this paper, we propose a downlink multiple-input single-output (MISO) transmission scheme, which is assisted by an intelligent reflecting surface (IRS) consisting of a large number of passive reflecting elements. In the literature, it has been proved that nonorthogonal multiple access (NOMA) can achieve the same performance as computationally complex dirty paper coding, where the quasi-degradation condition is satisfied, conditioned on the users’ channels fall in the quasi-degradation region. However, in a conventional communication scenario, it is difficult to guarantee the quasi-degradation, because the channels are determined by the propagation environments and cannot be reconfigured. To overcome this difficulty, we focus on an IRS-assisted MISO NOMA system, where the wireless channels can be effectively tuned. We optimize the beamforming vectors and the IRS phase shift matrix for minimizing transmission power. Furthermore, we propose an improved quasi-degradation condition by using IRS, which can ensure that NOMA achieves the capacity region with high possibility. For a comparison, we study zero-forcing beamforming (ZFBF) as well, where the beamforming vectors and the IRS phase shift matrix are also jointly optimized. Comparing NOMA with ZFBF, it is shown that, with the same IRS phase shift matrix and the improved quasi-degradation condition, NOMA always outperforms ZFBF. At the same time, we identify the condition under which ZFBF outperforms NOMA, which motivates the proposed hybrid NOMA transmission. Simulation results show that the proposed IRS-assisted MISO system outperforms the MISO case without IRS, and the hybrid NOMA transmission scheme always achieves better performance than orthogonal multiple access.

Driven by the explosive growth of Internet of Things (IoT) devices with stringent requirements on latency and reliability, ultra-reliability and low latency communication (uRLLC) has become one of the three key communication scenarios for the 5th generation (5G) and 6G communication systems. In this paper, we focus on the beamforming design problem for the downlink multiuser uRLLC system. Since the strict demand on the reliability and latency, in general, short packet transmission is a favorable way for uRLLC systems, which indicates the classical Shannon’s capacity formula is no longer applicable. With the finite blocklength transmission, the achievable rate is greatly influenced by the reliability and finite blocklength. Using the developed achievable rate formula for finite blocklength transmission, we respectively formulate the problems of interest as the weighted sum rate maximization, energy efficiency maximization, and user fairness optimization by considering the maximum allowable transmission power and minimum rate requirement. These problems considered are non-convex and are hard to obtain the global optimal solution, even for the local optimal solution. To overcome these difficulties, some important insights have been discovered by analyzing the function of achievable rate. For example, an analytical solution of the minimum rate requirement is provided with respective to the signal-to-interference-plus-noise ratio. Based on the discovered results, we provide algorithms to optimize the beamforming vectors and power allocation, which are guaranteed to converge to a local optimum solution to the formulated problems with low computational complexity. Our simulation results reveal that our proposed beamforming algorithms outperform the zero-forcing beamforming algorithm with equal power or water filling allocation widely used in the existing literatures.

Non-orthogonal multiple access (NOMA) and mobile edge computing (MEC) have been recognized as promising technologies for the beyond fifth generation networks to achieve significant capacity improvement and delay reduction. In this paper, the technologies of hybrid NOMA and MEC are integrated. In the hybrid NOMA MEC system, multiple users are classified into different groups and each group is allocated a dedicated time slot. In each group, a user first offloads its task by sharing a time slot with another user, and then solely offloads during a time interval. To reduce the delay and save the energy consumption, we consider jointly optimizing the power and time allocation in each group as well as the user grouping. As the main contribution, the optimal power and time allocation is characterized in closed form. In addition, by incorporating the matching algorithm with the optimal power and time allocation, we propose a low complexity method to efficiently optimize user grouping. Simulation results demonstrate that the proposed resource allocation method in the hybrid NOMA MEC systems not only yields better performance than the conventional OMA scheme but also achieves quite close performance as global optimal solution.

The forthcoming wireless network promises revolutionary advancements with significantly higher peak data rates, reduced latency, and vastly improved reliability. Among pivotal technologies, the design of novel multiple access schemes, particularly rate-splitting multiple access (RSMA), holds significant importance. In this article, we focus on the joint optimization of user scheduling, rate allocation, and beamforming for downlink multiple-input single-output communication networks under RSMA finite blocklength (FBL) transmission. The difficulty of the formulated optimization problem lies on the achievable rate function with FBL transmission and the joint design of user scheduling and beamforming. In order to solve the formulated problem, we first analyze the convexity and feasibility of the achievable rate function and further provide an efficient algorithm by cooperatively using strong Lagrangian duality, the difference of convex functions programming, the big-M method, and the alternating optimization algorithm for the joint optimization process. Numerical simulations validate the effectiveness of the proposed approach, offering promising insights for the future of 6G wireless networks.

The intelligent reflecting surface (IRS) technology is emerged as an enabling technology for beyond fifth-generation systems and Internet of Things networks in which the signal propagation is reconfigured to enhance wireless system performance. IRS consists of many passive elements and each reflecting the incident signal with a certain phase shift to collectively achieve the required beamforming. The IRS is to be a low profile and lightweight setting with a conformal geometry; hence, its position can be easily engineered to achieve certain performance enhancements. In the current literature, however, the flexibility in the IRS position is often overlooked since it is considered as a given fixture. We argue that optimizing the IRS position provides a new degree of freedom in the network design and enables extra performance gain. In this article, we analytically characterize the optimal IRS’s position to maximize the achievable system rate. We then obtain the optimal IRS positions for different IRS settings with fixed height and variable height and consider both cost-efficient equal phase shift IRS, and nonequal phase shift IRS that enables sophisticated beamforming. We further incorporate antenna directivity in our analysis and investigate its effect on the optimal IRS position in each case. Simulation results show that the provided optimal position yields higher performance than settings with random IRS locations. Our results provide significant practical insights on the network coverage design using the IRS.

User scheduling and beamforming design are two crucial yet coupled topics for multiuser wireless communication systems. They are usually addressed separately with conventional optimization methods. In this paper, cross-layer optimization problem is considered, namely, the user scheduling and beamforming are jointly discussed, subjecting to the requirement of per-user quality of service and the maximum allowable transmit power for multicell multiuser joint transmission networks. To achieve the goal, a mixed discrete-continuous variables combinational optimization problem is investigated with aiming at maximizing the sum rate of the communication system. To circumvent the original non-convex problem with dynamic solution space, we first transform it into a 0-1 integer and continuous variables optimization problem, and then obtain a tractable form with continuous variables by exploiting the characteristics of the 0-1 integer constraints. Finally, the scheduled users and the optimized beamforming vectors are simultaneously calculated by an alternating optimization algorithm. We also theoretically prove that the base stations allocate zero power to the unscheduled users. Furthermore, two heuristic optimization algorithms are proposed respectively based on brute-force search and greedy search. Numerical results validate the effectiveness of our proposed methods, and the optimization approach gets relatively balanced results compared with the other two approaches.