Two variants of electricity transmission from the Transfer-Switching Station (TSS) to the battery charging station were analysed in the paper. The first variant under analysis referred to the transmission of electricity via a three phase a.c. line with rated voltage of 15 kV. In the second variant of electricity transmission, the d.c. line with the working voltage of 1500 V was used. For both variants, lines and other equipment such as transformers, rectifier system and voltage stabilisation system in the battery charging station were modelled. For both solutions, analysis of energy per annum was conducted depending on the distance of the charging station from the TSS. On top of this, the simultaneous operation of several chargers was taken into account, which would correspond to the case of charging many buses at the same time from a single power line. The paper demonstrates that in the case of the analysed electricity transmission systems in the electric bus battery charging systems it is possible to use a more advantageous solution, which is characterised by reduced power and energy losses.
In the face of ongoing climate changes and the current geopolitical situation, Renewable Energy Sources (RES) are continuously gaining popularity in many countries. Objectives related to environmental protection and the use of RES set by different countries all over the world, as well as by the European Union (EU), are becoming priorities for many. The increase in the installed capacity of photovoltaic systems has been growing steadily for several years, leading to the creation of new systems accompanying PV installations; this phenomenon has also been observed in Poland. This paper presents a photovoltaic system in the form of a bicycle shed next to a school building as an example of building-integrated photovoltaics (BIPV) without connection to the power grid. It was shown that the energy consumption profile should be properly correlated with the production profile, otherwise significant losses occur. Alternative methods to improve the correlation of production and energy consumption by using SCADA systems or building automation to properly manage the electricity generation and consumption installation were also proposed. Furthermore, it was shown that adopting a fixed discount rate in financial analyses can distort the picture of real profits. An analysis of the changes in the NPV ratio using variable discount rates was carried out when analyzing the entire life of the solar plant.
Energia wyprodukowana w prosumenckich instalacjach fotowoltaicznych jest zużywana bezpośrednio przez urządzenia instalacji domowej tylko w ok.20-30% a pozostała część jest przesyłana do sieci elektroenergetycznej. Przez to sieć energetyczna jest mocno obciążona i występują określone problemy. Istnieje jednak wiele możliwości przesunięcia zużycia energii z okresów np. wieczornych na wcześniejsze godziny i zasilenie urządzeń elektrycznych w chwili dużej produkcji z instalacji fotowoltaicznej. W pracy przedstawiono możliwości zarządzania pracą różnych urządzeń (np. pompy ciepła, ładowarki samochodu elektrycznego) w oparciu o produkcję energii w instalacji prosumenckiej, dzięki czemu możliwe jest lepsze zarządzanie i rozdział wyprodukowanej energii.
W artykule scharakteryzowano instalacje fotowoltaiczne oraz magazyny energii. W części analitycznej wykonano analizę opłacalności instalacji fotowoltaicznej współpracującej z magazynami energii. Symulacji poddano systemy z zasobnikami energii o różnej pojemności. W pracy uwzględniono profil obciążenia gospodarstw domowych oraz dane udostępnionych przez IMGW. Analizie poddano wyniki otrzymane z zaproponowanego algorytmu na podstawie, których została wyznaczona rentowność instalacji fotowoltaicznej współpracującej z magazynem energii.
In the article two wireless electrical equipment power supply systems were discussed. The systems containing two and three air-core coils placed in various distances from one another were presented. Tests were conducted with the objective to identify the highest efficiency of the system with the transmission of 5 W to the distance of 50 mm. In the article operation of the systems was examined in the application for transmission to further distances.
The article discusses the subject of wireless power supply for battery packs in electric buses. It presents the disadvantages and advantages of such a way to power the vehicle and charge the batteries. An attempt is made at analysing the economic legitimacy of use of this type of energy transfer method. The analysis is based on the annual course of the bus at the level of 70 000 km with the used battery pack whose capacity reaches 250 kWh. The assumed life of the system comprised of 2000 charging cycles. The characteristics of energy and losses was drawn up based on the entire life.