Renewable Energy Sources (RES) have been gaining popularity on a continuous basis and the current global political situation is only accelerating energy transformation in many countries. Objectives related to environmental protection and use of RES set by different countries all over the world as well as the European Union (EU) are becoming priorities. In Poland, after years of a boom in photovoltaic (PV) installations, the Renewable Energy Sources Act has been amended, resulting in a change to the billing system for electricity produced by individual prosumers. The change in the billing method, also in pursuance to the provisions of EU laws, has contributed to the inhibition of the PV installation market for fear of energy prices and investment payback time. In this paper, by using the Net Present Value (NPV) method, three mechanisms of billing of electricity from prosumer micro-installations—based on the net-metering principle and net-billing principle (using monthly and hourly prices)—have been analysed. Particular attention has also been paid to the aspects of electricity self-consumption and energy storages, which play a significant role in the economy of PV installations in the net-billing system.
Based on a method to reduce energy consumption suggested in a real energy audit carried out in an industrial plant located in Poznań (city in Poland), the potential of using photovoltaic (PV) panels as wall cladding was analyzed, in order to reduce energy (electric and thermal) consumption and financial expenditure. The authors’ concept of using building integrated photovoltaic installation (BIPV) was presented and tested. This study checked whether the presence of PV modules would also affect heat transfer through the external wall of the building on which the installation is located. The analysis consisted of determining, for two variants, the heat transfer coefficients across the partition, in order to estimate the potential thermal energy savings. The first variant concerned the existing state, i.e., heat transfer through the external wall of the building, while the second included an additional partition layer in the form of photovoltaic panels. As a result, the use of panels as wall cladding allowed the improvement of the thermal parameters of the building wall (by increasing the thermal resistance of the wall), and the reduction of gas consumption for heating. The panels also generate electricity for the factory’s own needs. Payback time, compared to calculations which do not include changes in thermal parameters, was shortened from 14 to 11 years. The main reason for this is that gas consumption is reduced due to the improved heat transfer coefficient of the wall and the reduction of the heat loss of the facility. This aspect is usually overlooked when considering photovoltaic installations and, as argued by this paper, can be important.
Renewable energy sources (RES) will play a key role in the transition to clean energy. Financial and socio-economic benefits determine the investment management in these energy sources. This article aims to indicate current energy policy goals, present socio-economic benefits resulting from renewable energy investments, and review further development directions in Poland. The research was carried out using desk research, case studies, and literature review methods to provide a broader economic context for RES investments. The scope of the research included both the Polish and the European Union contexts. The authors examined the Polish objectives of investment in renewable energy contained in strategic, planning, and other legal documents compared to EU targets, reviewed possible investments in renewable energy, and indicated wind farms and photovoltaic investments as the most effective ones from the point of view of further development which aims to meet the EU’s goals by 2030. The authors also demonstrated a wide range of socio-economic benefits based on literature reviews, analysis of policy documents, and regulations regarding the energy sector, and examined a specific example of investment implementation and identified the ecosystem of beneficiaries and their benefits.
Two variants of electricity transmission from the Transfer-Switching Station (TSS) to the battery charging station were analysed in the paper. The first variant under analysis referred to the transmission of electricity via a three phase a.c. line with rated voltage of 15 kV. In the second variant of electricity transmission, the d.c. line with the working voltage of 1500 V was used. For both variants, lines and other equipment such as transformers, rectifier system and voltage stabilisation system in the battery charging station were modelled. For both solutions, analysis of energy per annum was conducted depending on the distance of the charging station from the TSS. On top of this, the simultaneous operation of several chargers was taken into account, which would correspond to the case of charging many buses at the same time from a single power line. The paper demonstrates that in the case of the analysed electricity transmission systems in the electric bus battery charging systems it is possible to use a more advantageous solution, which is characterised by reduced power and energy losses.
The development and advantages of renewable energy technologies mean that their areas of application are constantly expanding. The development of roads, transport systems, and electromobility also increases the demand for electricity. Roads occupy a certain area that could be used to install wind turbines or photovoltaic systems that could be used to power, among others, electric vehicle charging stations and road technical infrastructure facilities (travel service areas, tunnel lighting, road signs). There are many examples around the world where such solutions have been used. This critical review of existing solutions and the possibilities of their application in new places may contribute to further development and research in this area. Particular attention was paid to the possibility of using renewable energy systems in Poland, which can be successfully transferred to other countries with a similar climate.