Industrialization and population growth have significantly increased the demand for lightweight, high-strength materials for construction and automotive applications, ultimately increasing the demand for eco-friendly materials. Due to its environmental acceptability, technological feasibility, and economic viability, natural fiber-reinforced composite exhibits many potential engineering applications. However, the production and recycling of natural fibers are expensive. Researchers are now comparing natural fiber-reinforced composites with synthetic composites to determine the best materials, especially for construction and automotive engineering applications. This review paper focuses on natural fiber reinforced epoxy composites’ physical, mechanical, and thermal characteristics. These properties are critical for the effective design and use of composite materials such as construction and automotive applications. This review begins with a background of epoxy and natural fibers. The physical and chemical treatment for natural fiber composites to improve their properties is also briefly discussed, along with the critical factors affecting the physical, mechanical, and thermal properties of natural fiber-reinforced composites. Finally, concluding remarks and suggestions for future works are given.
1 February 2022 in Science of The Total Environment
In recent times, demand for light weight and high strength materials fabricated from natural fibres has increased tremendously. The use of natural fibres has rapidly increased due to their high availability, low density, and renewable capability over synthetic fibre. Natural leaf fibres are easy to extract from the plant (retting process is easy), which offers high stiffness, less energy consumption, less health risk, environment friendly, and better insulation property than the synthetic fibre-based composite. Natural leaf fibre composites have low machining wear with low cost and excellent performance in engineering applications, and hence established as superior reinforcing materials compared to other plant fibres. In this review, the physical and mechanical properties of different natural leaf fibre-based composites are addressed. The influences of fibre loading and fibre length on mechanical properties are discussed for different matrices-based composite materials. The surface modifications of natural fibre also play a crucial role in improving physical and mechanical properties regarding composite materials due to improved fibre/matrix adhesion. Additionally, the present review also deals with the effect of silane-treated leaf fibre-reinforced thermoset composite, which play an important role in enhancing the mechanical and physical properties of the composites.
In this study, the hybrid composites were prepared from ramie and jute natural as reinforcement, an epoxy polymer as a matrix, and SiC and cellulose as fillers via hand layup process. Mechanical and thermogravimetric analysis was carried out to quantify the effect of reinforcement on hybrid composites and evaluate their mechanical properties and thermal stability. The mechanical tests showed improvement in tensile and flexural strength of the hybrid composites with increasing content of bidirectional woven ramie fiber, and decreased with increased content of chopped jute fiber. The Izod impact test results revealed that chopped jute fiber form could resist more impact load when compared with woven ramie mat fibers. Hence, the impact energy increased with the increased content of chopped jute fiber in the hybrid composites. The surface morphological analysis of hybrid composites revealed the fiber pullout, cracks, and other failure modes of the hybrid composite using SEM analysis.
In this study, experiments are performed to study the physical and mechanical behaviour of chemically-treated sugarcane bagasse fibre-reinforced epoxy composite. The effect of alkali treatment, fibre varieties, and fibre lengths on physical and mechanical properties of the composites is studied. To study the morphology of the fractured composites, scanning electron microscopy is performed over fractured composite surfaces. The study found that the variety and lengths of fibres significantly influence the physical and mechanical properties of the sugarcane bagasse-reinforced composites. From the wear study, it is found that the composite fabricated from smaller fibre lengths show low wear. The chemically-treated bagasse-reinforced composites fabricated in this study show good physical and mechanical properties and are, therefore, proposed for use in applications in place of conventional natural fibres.
12 May 2022 in International Journal of Metalcasting